Important Tips Audio Signal for Indication of the Laser Beam The position of the laser beam on the reception area can be indicated via an audio signal. The volume level can be increased, decreased or switched OFF. At low volume level, the Audio Signal Indicator 17 appears on the display with one bar. At high volume level, the Audio Signal Indicator 17 appears on the display with two bars. When the audio signal is turned OFF, the volume indicator cannot be seen. Independent of the audio signal setting, a short, low-volume beep sounds every time a button on the receiver is pressed. Fine/Coarse Adjustment Accuracy will always default to fine setting when powered-ON. Press the Accuracy Button 18 once to switch to coarse setting. Pressing the Accuracy Button 18 again will switch back to fine setting. NOTE: Course setting allows faster detection and centering of the laser beam. Detecting the Laser Beam The position of the laser beam on the LED display is indicated by: - Audio and directional indicators - Optionally via the directional signal only
28
Made with FlippingBook Ebook Creator