Novelio® CLASSIC
Novelio® CLASSIC
Novelio® SPECIALITY
1
1
Novelio® STANDARD
Novelio® EASYGLUE
Novelio® RENOVATION*
The wall must be clean (no dust, dirt or grease), dry, even and primed. Temperature should not be below 8 °C.
The wall must be clean (no dust, dirt or grease), dry, even and primed. Temperature should not be below 8 °C.
2
2
1. Pull the wallcovering through the machine and cut one panel according to the room height (+10 cm). Do not leave the product in water. 2. Immediately place the wallcovering panel vertically on the wall after pulling it through the water. 3. Place the adjacent panel edge to edge, making sure to respect the fluidity of the vertical pattern. Repeat steps 1, 2, and 3 with other panels until you have covered all relevant areas of the room. 4. Cut off any surplus with a knife. 5. Apply the 1st layer of acrylic paint when the product is dry (approx. 1 day). We recommend to apply a second layer of paint with dark colors.
1. Cut to length according to room height (+10 cm). 2. Evenly apply the dispersion adhesive on the wall with a roller (approx. 200 g/m²). For heavy renovation products (with the suffix -CY), use glue for heavy wallcoverings (approx. 250 g/m 2 ). 3. Place the wallcovering panel vertically on the wall and smooth it down with a plastic spatula. 4. Place the adjacent panel edge to edge, making sure to respect the fluidity of the vertical pattern. Wipe away excess glue on the joint with a clean tissue. Repeat steps 1, 2, and 3 with other panels until you have covered all relevant areas in the room. 5. Cut off any surplus with a knife. 6. Apply the 1st layer of acrylic paint when the product is dry (approx. 1 day). Apply a 2nd layer of acrylic paint when the product is dry (approx. 1 day).
3
3
4
4
INSTALLATION VIDEO:
INSTALLATION VIDEO:
5
5
6
* Valid for heavy renovation products (with the suffix -CY)
The fiberglass fabric is carefully checked before leaving our factory, but you should double check it before hanging. Warranty claims should include the roll label and a sample that shows the defect.
The fiberglass fabric is carefully checked before leaving our factory, but you should double check it before hanging. Warranty claims should include the roll label and a sample that shows the defect.
106
107
Made with FlippingBook - Online Brochure Maker