FOR SAFE WORKING LIVES
HANDPROTECTION 5
CATALOGUE VOL1
HANDPROTECTION 5
CUT RESISTANT DRY
12-15
CUT RESISTANT WET & OILY
16
GENERAL HANDLING DRY
18-21
GENERAL HANDLING WET & OILY
22-23
MECHANICS/ANTI IMPACT & VIBRATION RESISTANT
24-27
COLD RESISTANT
28-29
30-32
HEAT RESISTANT & WELDING
GENERAL PURPOSE COTTON & LEATHER
SELECTION OF THE RIGHT TYPE OF GLOVE IS ESSENTIAL IN PROTECTING USERS FROM HAZARDS THAT THEY MAY ENCOUNTER DURING THEIR WORK. Hazards can include chemicals, biological hazards, heat, extreme cold, abrasive surfaces and mechanical hazards. Gloves can protect against chemical exposure, infections, burns, cuts, punctures and other damage to skin tissue, but may even guard against bone and cartilage trauma of the hand.
34-41
SINGLE USE (DISPOSABLE)
42-44
CHEMICAL RESISTANT
46-50
HAND PROTECTION
HANDS AT WORK ARE EXTREMELY VULNERABLE TO A WIDE RANGE OF HAZARDS WHICH INCLUDE CUTS, BLOWS, CHEMICAL ATTACK AND TEMPERATURE EXTREMES. YOUR HANDS ARE YOUR MOST IMPORTANT TOOLS, SO WE WANT TO PROTECT THEM WITH THE BEST. AT BUNZL SAFETY, OUR COMMITMENT IS THE REDUCTION IN THE NUMBER AND SEVERITY OF ACCIDENTAL INJURIES TO THE HANDS AND ARMS IN YOUR WORKPLACE. We offer a variety of innovative products and resources that support and advise you in the choice of the right protection against the hazards (dirty and/or dangerous) that are found in work environments, whilst ensuring the cost effectiveness of this protection through competitive pricing. on the ultimate combination of functionality, durability, economy and protection to match your specific job requirements. Today, industry has increasingly complex, sensitive and often hazardous manufacturing and handling processes. Hence our offering helps identify your safest “fit for purpose” options. Our gloves are used in a multitude of industries, including automotive, chemical, environmental, food processing, mining, construction and aerospace etc. Whichever industry our gloves are used in, they provide the protection, dexterity and comfort needed to achieve higher productivity and experience fewer injuries and employee down time. WHAT GOES INTO GREAT GLOVES? With our wide range of work gloves you can count We are pleased to answer your questions and can conduct on site assessments to tackle your toughest safety challenges.
Our product range addresses the following application areas:
• • • • • • •
GENERAL HANDLING & MAINTENANCE IMPACT & VIBRATION PROTECTION
CHEMICAL HAZARDS
DRY, WET OR OILY HANDLING CUT & ABRASION HAZARDS
FOOD & HYGIENE
GARDEN & HOUSEHOLD
GLOVE STANDARDS AND RECENT CHANGES TO EN388 THE EN388 STANDARD HAS CHANGED IN MANY FACETS. PREVIOUSLY, THE EN388 WAS A COMPILATION OF FOUR TESTS (ABRASION, CUT, TEAR, PUNCTURE) USED FOR DETERMINING THE MECHANICAL PROTECTION LEVELS OF PPE MATERIALS. Used in European markets, this test has been making its way globally as a widely accepted standard for measuring protective properties of industrial PPE. Even the Australian Standard has this test embedded in its regulations. The main changes revolve around cut testing. It’s a topic that’s been talked about in the hand safety industry over the past several years regarding cut testing: how accurate is EN388’s old Coup Test when it comes to high cut resistance materials? To be clear, this is the test that determined that a glove was Cut 5 or 3 etc. The Coup Test measures the amount of cut resistance using a circular blade that travels back and forth (like a pizza cutter) across the palm section of the product being tested under a fixed weight of 500 grams. When testing materials have a high amount of cut resistance, the blade dulls over time, which can skew the results. This, along with other aspects of the test, makes it hard for safety managers and users alike to gauge the true cut resistance of their PPE. Now, with the revised standard, the Coup Test is limited to a maximum number of 60 rotations, whether the blade has cut through the material sample or not. If the test reaches 60 rotations, the material is required to be tested using the ISO 13977 Cut Resistant Method, also commonly known as the TDM 100 Test. The result of the TDM Test is used to determine the actual cut resistance of the glove material and assesses how much force is needed to cut the material over a 20mm stroke using a straight blade. Cut levels in this test are characterized by letters A to F. The addition of the ISO 13977 Cut Test Method and the TDM Test will help ensure that cut materials are receiving accurate scores, which in turn will help workers make more informed decisions about their safety. With these changes, manufacturers can now opt out of performing the Coup Test and perform only the TDM 100 test if desired.
ADDITIONAL EN388 CHANGES
ABRASION RESISTANCE TESTING The revised EN388 Standard also calls for a new type of abrasive paper to be used during abrasion resistance testing. The original test method will remain the same –a sample from the glove’s palm will be rubbed with abrasive paper to determine how long it takes for a hole to wear through the material. While not a significant modification, the updated method may change some abrasion resistance test scores. IMPACT PROTECTION If gloves have impact protection on the back of the hand, they have the option to be tested to verify their protective properties. EN 388:2016 contains a test for impact resistance where testing is carried out in accordance with clause 6.9 of EN 13594. Gloves must meet the requirement of level 1 of EN 13594:2015. The impact test consists of placing the (back-of-hand/knuckle) impact resistant material from the glove over a domed anvil (basically a block of metal with a flattened circular top surface) and dropping a 2.5kg flat face surface striker from a sufficient height to provide an impact energy of 5 joules. (Joules are the derived unit used to measure the force of one newton in the direction of its motion through a distance of one-newton meter.) The peak force is detected and recorded by a sensor that’s beneath the anvil. This test is done four times in each area of protection taken from four different gloves. This helps ensure the results are consistent across the board. To pass the test, the transmitted force needs to be less than or equal to 7 kilonewtons with no single results greater than 9 kilonewtons.
EN 388 EN 8
If TDM Cut Test has not yet been performed - X will be added to marking If Glove passes Impact protection standard - P can be added to marking
3X43EP
NEW! Impact Protection NEW! (TDM Test) Cut (N) Puncture (N) Tear
(Couple Test) Cut (Cycles) Abrasion
LOW Cut protection level
MEDIUM Cut protection level
HIGH Cut protection level
EXTRA HIGH Cut protection level
Performance level rating Cut resistance (Newton) Suggested applications
A
B
C
D
E
F
> 2
> 5
> 10
> 15
> 22
> 30
Light material handling without sharp edges objects, part assembly, automotive maintenance, construction, multipurpose...
Packaging, warehouse, light metal stamping, automotive and white goods parts assembly...
Ligth duty sheet metal and glass handling, metal stamping, plastics, tyre production, automotive and
Sheet metal and glass/bottle handling, metal stamping, light duty meat and poultry handling, carpentry, printing...
Heavy duty sheet metal handling. Plate glass handling, metal recycling, waste management, meat and poultry handling, printing...
Heavy duty sheet metal
handling, metal recycling, waste management, heavy duty meat processing, slaughterhouses...
white goods industries...
bunzlsafety.com.au | 5 5
COMPLIANCE AND TEST STANDARDS WHAT THE SYMBOLS REPRESENT
WHAT THE NUMBERS REPRESENT
EN 388:2016
EN 388:2016 This Standard applies to all kinds of protective gloves giving protection from mechanical risks, in respect of physical problems caused by abrasion, blade cut, tearing or puncture.
EN 388
EN 388 EN 8
If TDM Cut Test has not yet been performed - X will be added to marking If Glove passes Impact protection standard - P can be added to marking
3X43EP
NEW! Impact Protection NEW! (TDM Test) Cut (N) Puncture (N) Tear
EN 374 This Standard specifies the capability of gloves to protect the user against chemicals and/or micro-organisms.
EN 374
(Couple Test) Cut (Cycles) Abrasion
CHEMICAL RESISTANCE The letter code applies to the chemicals the glove is resistant to.
EN 511: COLD
PERFORMANCE LEVEL
(a) Resistance to convection cold (b) Resistance to contact cold
0-4 0-4
(c) Permeability to water
0-12 250
>15 >15 >15
Low chemical resistance to unspecified chemicals.
3 4
350 500
EN 511
EN 511 This Standard applies to gloves which protect the hands against convective and contact cold.
EN 407: THERMAL HAZARDS
PERFORMANCE LEVEL
(a) Burning behaviour (b) Contact heat (c) Convective heat
0-4 0-4 0-4
EN 407 This Standard specifies thermal performance for protective gloves against heat and/or fire.
EN 407
(d) Radiant heat 0-4 (e) Small splashes of molten metal 0-4 (f) Large splashes of molten metal 0-4
EN 659 This Standard defines performance requirements for gloves designed to protect fire fighters against heat and flames.
EN 659
CONTACT HEAT
EN 659 A sample is taken from the palm area of a glove. The outside of the glove is put on a hot surface and the temperature of the inside of the glove is then monitored. The temperature on the inside of the glove must take 15 seconds or more to rise by 10°C from room temperature. EN 407 PERFORMANCE LEVEL CONTACT TEMP. ºC THRESHOLD TIME SECONDS
EN 421 This Standard lays down test methods and performance criteria for gloves offering protection against ionising radiation and radioactive contamination.
1 2 3 4
100 250 350 500
>15 >15 >15 >15
EN 455 Medical gloves for single use. If a glove is to be used for food handling, it is required to carry either the words ‘for food use’ or this symbol.
6 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1 5
THE IMPORTANCE OF GLOVE MAINTENANCE Wearers must take careful note of the condition of their gloves and replace them as soon as any degradation, contamination or damage has taken place that renders the gloves ineffective for their intended function. This is especially important for chemical-resistant gloves that offer the wearer protection from serious hazards. Check for gloves that have become brittle or cracked, softened excessively, or show signs of becoming abnormally porous. Effective protection is maintained by regular replacement of the gloves.
GLOVE SIZES
Poorly fitting gloves can cause injury due to the glove slipping and the user lacking dexterity if the glove are too loose. Use the guide below to assist with choosing the right sized glove.
WHAT’S MY GLOVE SIZE? Measure the circumference of your hand in inches or centimetres between thumb and knuckle, then locate your size in the chart.
CARE BEFORE USING GLOVES IN CHEMICAL ENVIRONMENTS
BEFORE USE
•
Make sure gloves are dry both inside and out before reusing
• Thoroughly wash and dry your hands before donning the gloves.
DURING USE
• Slightly folding the sleeve of the glove over itself will help prevent unwanted substances from coming into contact with the arms • Frequently check that the gloves are not displaying any signs of degradation or becoming porous • DO NOT use gloves beyond the recommended exposure
time, as highlighted within a COSHH (Control of Substances Hazardous to Health) assessment.
REMOVAL
SIZE ALPHA
SIZE NUMERIC
HAND IN CENTIMETERS
HAND IN INCHES
• Always follow user instructions when removing gloves • Heavily contaminated gloves should be disposed of safely and should be removed from the hand by easing each glove off with the other until they can be safely dropped into a suitable container.
XXS
5
12.7 - 15.2
5” - 6”
XS
6
15.2 - 17.7
6” - 7”
S
7
17.7 - 20.3
7” - 8”
M
8
20.3 - 22.8
8” - 9”
CLEANING
L
9
22.8 - 25.4 9” - 10”
• Remove excess contaminant. If safe to do so, gloves may then be washed with mild detergent in warm water (provided that the contaminant does not have an adverse reaction to water) and left to dry.
XL
10
25.4 - 27.9 10” - 11”
2XL
11
27.9 - 30.4 11” - 12”
bunzlsafety.com.au | 7 5
THE ART OF PERFORMANCE
THE SYMBOLS APPEARING NEXT TO NINJA GLOVES INDICATE THE COATING TECHNOLOGIES USED UNLESS OTHERWISE STATED
NFT™ - UNMATCHED COMFORT AND DURABILITY
The New Foam Nitrile Technology is a unique proprietary technology offering the most technologically advanced, light weight, breathable, comfortable and durable gloves that feel like a second skin. Rigorously engineered to give outstanding grip, abrasion resistance and dexterity for precision handling in oily, greasy and dry environments. It is one of Ninja ® ’s next- generation technologies.
HPT™ - SUPERIOR GRIP AND DEXTERITY
The Hydropellent Technology is a unique proprietary coating that repels liquid and provides excellent grip in wet, dry and oily conditions. The HPT™ offers secure handling gloves that are extremely light weight and dexterous with superior grip features for maximum control in wet environments. Furthermore, this unique coating has “encapsulated air pockets” which absorb and mitigate the effects of light vibrations enhancing its grip performance.
RFT™ - EXTREME ENDURANCE AND GRIT Rufftec™ is a unique proprietary technology that offers excellent abrasion resistant characteristics that make these gloves outlast all other. Excellent grip in dry, oily and wet conditions.
5
8 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1
GLOVE SELECTION GUIDE
GLOVE TYPE PHOTO
USE TYPE
ADVANTAGES
DISADVANTAGES
• Good general lab use glove, adequate protection from many organic solvents, oils, greases, and some acids and bases • Good protection from blood, cell lines, and tissue • Clear indication of tears and breaks • Excellent dexterity • Non-allergenic • Good protection from many biological agents, including blood, cell lines, and tissue • Provides good protection from some acids and bases • Excellent dexterity
• Incidental chemical contact use only • General lab chemical use • Commonly used in the medical field
• Not effective for direct contact use • Not effective for use with many halogenated solvents
NITRILE, DISPOSABLE
• Not effective for direct contact use • Not effective for use with many organic solvents • Allergenic • Difficult to detect tears and breaks
• Incidental chemical contact use only • Commonly used in the medical field • Not suitable for many lab settings
LATEX, DISPOSABLE
• Good protection from many ketones, esters, gases, vapours, acids, and bases • Can be decontaminated / reused • Puncture and tear resistant
• Not effective for use with gasoline, aliphatic, aromatic, and halogenated hydrocarbons • Poor dexterity
• Suitable for direct contact with some chemicals
NEOPRENE RUBBER
• Good protection from many acids, bases, oils, fats peroxides, and amines • Can be decontaminated / reused • Puncture and tear resistant
• Not effective for use with many organic solvents • Average dexterity
• Suitable for direct contact with some chemicals
PVC
• Good all-purpose work glove where very minor chemical contamination is possible; provide minimal chemical resistance • Can be decontaminated / reused • Puncture and tear resistant • Good dexterity and grip • Excellent cut resistance to sharp objects such as razor blades and pipette tips • Some provide minimal chemical resistance • Can be decontaminated / reused • Good dexterity and grip
GENERAL PURPOSE NITRILE COATED
• Not effective for direct and/or prolonged exposure to chemicals
• Incidental chemical contact use only
• Used when handling sharp objects • Incidental chemical contact use only
• Not effective for direct and/or prolonged exposure to chemicals
CUT-RESISTANT
• Good all-purpose work glove for non- hazardous material handling • Puncture and tear resistant
• Not effective for use with hazardous chemicals as leather absorbs liquids • Poor dexterity
• Non-hazardous material handling; not to be used with chemicals
LEATHER
• Excellent protection from hot surfaces such as autoclaves and drying ovens • Designed to be reused for long periods of time
• Not effective for use with hazardous chemicals as leather absorbs liquids • Poor dexterity
HEAT RESISTANT GLOVES
• Used when handling hot surfaces
• Reduces extent of injury by absorbing impact force. • Reduces the effect of vibration and therefore the risk of nerve compression and tendon inflammation in the hand and wrist
IMPACT RESISTANT GLOVES
• Used when there is risk of blunt trauma to palm, back of hand or both
• Some dexterity may be lost in to achieve additional safety
bunzlsafety.com.au | 9 5
10 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1 5
YOUR GUIDE TO GLOVE TYPES TO MAKE IT EASIER TO CHOOSE THE APPROPRIATE GLOVE FOR THE REQUIRED TASK(S), PLEASE USE THIS GUIDE BELOW.
PAGE 12-15
CUT RESISTANT DRY ENVIRONMENT GLOVES Protects hands from sharp tools or objects in dry environments
PAGE 16
CUT RESISTANT WET AND OILY ENVIRONMENT GLOVES Protects hands from sharp tools or objects in wet and oily environments
PAGE 18-21
GENERAL HANDLING DRY ENVIRONMENT GLOVES Protects hands when performing general tasks in dry environments
PAGE 22-23
GENERAL HANDLING WET AND OILY ENVIRONMENT GLOVES Protects hands when performing general tasks in wet and oily environments
MECHANICS / ANTI-IMPACT AND VIBRATION RESISTANT GLOVES Protects hands from impact damage and vibration
PAGE 24-27
PAGE 28-29
COLD RESISTANT GLOVES Protects hands when handling cold objects
PAGE 30-32
HEAT RESISTANT AND WELDING GAUNTLETS Protection when handling hot objects
PAGE 34-41
GENERAL PURPOSE COTTON AND LEATHER GLOVES Protects hands in general assembly environment
PAGE 42-44
SINGLE USE (DISPOSABLE) GLOVES Protects against cross-contamination
PAGE 46-50
CHEMICAL RESISTANT GLOVES Protection from harmful chemicals/substances
bunzlsafety.com.au | 11 5
CUT RESISTANT DRY ENVIRONMENTS
EN 388 EN 388:2016
EN 388 EN 388:2016
4X31B
4X42C
EN 388 EN 388:2003
EN 388 EN 388:2003
4331
4542
MAXIM GLOVE CUT 5 (LEVEL C) FEATURES AND BENEFITS
MAXIM GLOVE CUT 3 (LEVEL B) FEATURES AND BENEFITS
• 15 gauge HPPE, glass, nylon/spandex plaited composite knitted liner • High performance engineered liners made from high tensile yarns made in Ninja®’ own manufacturing facilities for outstanding cut resistant quality • The most light weight liner and coating for maximum comfort and cut resistance • Re-enforcement between thumb and forefinger greatly extends the life of the glove
• 18 gauge HPPE, glass, nylon/spandex plaited composite knitted liner • Outstanding cut resistance, high performance engineered liners made from high tensile yarns made in Ninja®’s own manufacturing facilities, for outstanding cut resistant quality • The most light weight liner and coating for maximum comfort and cut resistance • Re-enforcement between thumb and forefinger greatly extends the life of the glove
CODE
SIZE
PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
NIMAXIMC3GG
S - 2XL
12
144
NIMAXIMC5BL
S-2XL
12
144
EN 388 EN 388:2016
EN 388 EN 388:2016
4342B
4X43D
EN 388 EN 388:2003
EN 388 EN 388:2003
4342
4543
RAZR DIAMOND GLOVE CUT 5 (LEVEL D) FEATURES AND BENEFITS • 15 gauge Dyneema® Diamond, nylon/spandex knitted liner • Soft PU coating offering superb flexibility and comfort • High cut performance 200% improvement in cut resistance performance when compared to gloves made with standard Dyneema® fibre • The dramatically thin fibre of Dyneema® Diamond technology allows for increased cut resistance without the fibreglass discomfort. It allows for better feel and control and radiates heat away from hands for all-day comfort
HYFLEX 11-627 DYNEEMA CUT RESISTANT GLOVE FEATURES AND BENEFITS • Polyurethane coating gives the gloves flexibility and fit • Secure grip on dry to slightly oily pieces • Combination of Dyneema®, Nylon, Lycra®, and glass fiber • Extreme resistance to cuts and burrs
CODE
SIZE
PACK QTY CTN QTY
CODE
SIZE 6-11
PACK QTY CTN QTY
5
NIDIAMNC5S5
S-2XL
12
144
NN0011627
12
144
12 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1
CUT RESISTANT DRY ENVIRONMENTS
EN 388 EN 388:2016
EN 388 EN 388: 2016
4X42B
4X42C
EN 388 EN 388:2003
Cat. II
3342
RAZR DIAMOND GLOVE FEATURES AND BENEFITS • 18 gauge Dyneema® Diamond, nylon/spandex knitted liner • Soft PU coating offering superb flexibility and comfort • High cut performance 200% improvement in cut resistance compared to gloves made with standard Dyneema® fibre • The dramatically thin fibre of Dyneema® Diamond technology allows increased cut resistance without fibreglass discomfort. It allows for better feel and control and radiates heat away from hands for all-day comfort
IGUANA PU GLOVE FEATURES AND BENEFITS
• Cut 5 protection - Level C • Puncture level 2 protection • Seamless 13 gauge shell for enhanced dexterity • PU coat for wet, oily and dry enhanced grip • Hi vis yellow for increased visibility
CODE
SIZE
PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
NIDIAMNC3SB
S-2XL
12
144
FRCLTPUC5FY
S-2XL
12
144
EN 388 EN 388: 2016
EN 388 EN 388: 2016
4X42B
4X42C
EN 388 EN 388: 2003
Cat. II
4342
EN 1149
HYFLEX 11-531 NITRILE GLOVE FEATURES AND BENEFITS • Ultra light weight glove that offers unparalleled dexterity • ZONZ knitting technology enhances hand movement • Silicone free design is paint and finish process friendly • Dirt masking palm for longer wear times CODE SIZE
IGUANA GLOVE (NITRILE DIP) FEATURES AND BENEFITS • Cut 5 protection - Level C and puncture level 3 protection • Seamless 13 gauge shell for enhanced dexterity • Micro foam nitrile coat for superior wet and oily grip • Air capillaries provide enhanced padding and vibration
PACK QTY CTN QTY
CODE
COLOUR
SIZE
PACK QTY CTN QTY
5
11-531
6-11
12
144
FRIGUANC5BK BLACK FRIGUANC5FL FLUORO
S-2XL S-2XL
12 12
144 144
bunzlsafety.com.au | 13
CUT RESISTANT DRY ENVIRONMENTS
EN 388 EN 388:2016
EN 388 EN 388:2016
4X43C
4X43C
EN 388 EN 388:2003
EN 388 EN 8
4543
4543
EN 407 EN 07
X1XXXX
Cat. II
RHINO HPPE PLUS LEATHER GLOVE FEATURES AND BENEFITS • Cut 5 protection - Level C • Leather palm on 10g seamless HPPE/high performance synthetic fibre shell for added resistance to cuts and punctures • Heavy duty with high dexterity • Resistance to contact heat rated to level 1 • Excellent abrasion resistance • Effective for wet grip
HYFLEX 11-735 INTERCEPT GLOVE FEATURES AND BENEFITS • Excellent resistance to cuts and burrs. 10 gauge seamless shell • Resilient coating resists abrasions and extends glove life • High level of cut protection CODE SIZE PACK QTY CTN QTY AN1173500 6-11 12 144
CODE
SIZE
PACK QTY CTN QTY
FRRHINOC5
L - 2XL
12
144
EN 388 EN 8
EN 388 EN 8
4X32F
2X42C
EN 407 EN 07
EN 407 EN 07
X1XXXX
412110
HYFLEX 11-542 NITRILE COATED CUT LEVEL F GLOVE FEATURES AND BENEFITS • High Cut Resistance • High dexterity • High comfort & lightweight
POWERFLEX 80-813 CUT/FLAME RESISTANT GLOVE FEATURES AND BENEFITS • Inherently flame resistant • Superior arc-flash protection • EN ISO cut level C protection • Ergonomic design and superior comfort, • DuPont™ Kevlar® liner increases safety performance
• Dirt masking design for extended use life • EN407 Contact heat protection Level 1
5
CODE
SIZE 6-11
PACK QTY CTN QTY
CODE
SIZE 6-11
PACK QTY CTN QTY
AN1154200
12
144
AN8081300
12
144
14 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1
CUT RESISTANT DRY ENVIRONMENTS
EN 388 EN 388; 2003
EN 388 EN 388
4543
4X42C
EN 388 EN 388; 2016
Cat. II
4X43C
BOORNINY CUT 5 GLOVE FEATURES AND BENEFITS • Cut level 5 protection (Level C) • High abrasion and tear properties
HYFLEX INTERCEPT 11-751 GLOVE FEATURES AND BENEFITS • INTERCEPT Technology™ for high level of cut protection • High durability PU coating • Dirt masking design • Excellent comfort and dexterity
• Seamless 13 gauge shell for enhanced dexterity • Micro foam nitrile coat for superior wet and oily grip • Air capillaries provide enhanced padding and vibration CODE SIZE
PACK QTY CTN QTY
CODE
SIZE 6-11
PACK QTY CTN QTY
NBOORN201BB
S - 2XL
12
144
NN001175100
12
144
EN 388 EN 388; 2003
4342
EN 388 EN 388; 2016
4342B
HYFLEX INTERCEPT 11-724 PU GLOVE FEATURES AND BENEFITS • Polyurethane coating gives the gloves flexibility and fit • Secure grip on dry to slightly oily pieces • Coating hides dirt in environments with dirt exposure • Resilient coating resists abrasions
5
CODE
SIZE 6-11
PACK QTY CTN QTY
NN001172400
12
144
bunzlsafety.com.au | 15
CUT RESISTANT WET & OILY ENVIRONMENTS
EN 388 EN 388:2016
EN 388 EN 388:2016
4311B
4X43B
EN 388 EN 388:2003
EN 388 EN 388:2003
4331
4543
Cat. II
Cat. II
MAXIM OIL GLOVE FEATURES AND BENEFITS
CLASSIC FIVE STAR CUT GLOVE FEATURES AND BENEFITS • 13 gauge Dyneema®, glass and synthetic fiber knitted liner • Bi-polymer coating • The glove lasts 20 times longer than gloves made with aramid- based yarns • The glove provides excellent grip, flexibility, softness and durability • Sanitised® to kill bacteria and promote freshness
• Excellent breathability and grip, soft textured NFT™ coating with ‘micro-capillaries’ channels away excessive fluid from the surface keeping hands dry and cool from inside out, providing excellent grip in oily environments • 18 gauge HPPE, glass, nylon/spandex plaited composite knitted liner • The most light weight liner and coating for maximum comfort and cut resistance • Re-enforcement between thumb and forefinger greatly extends the life of the glove CODE SIZE PACK QTY CTN QTY NIMXOILC3BL S - 2XL 12 144
STANDARDS AS/NZS 2161.3:2005
CODE
SIZE
PACK QTY CTN QTY
NIACECUT5BL
L - XL
12
120
5
16 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1
CUT RESISTANT WET & OILY
5
bunzlsafety.com.au | 17
GENERAL HANDLING DRY ENVIRONMENTS
EN 388 EN 8
EN 388 EN 8
4121
4131
Cat. II
Cat. II
MAXIM COOL GLOVE FEATURES AND BENEFITS • 15 gauge nylon/spandex knitted liner
MAXIM TACTUS GLOVE FEATURES AND BENEFITS • Ergonomic design allows minimum hand fatigue, increasing productivity and comfort • Super dexterous • Super thin • 18 gauge nylon/spandex liner offers excellent flexibility and comfort • Superior grip provides excellent grip even in oily conditions
• Excellent breathability, provides 360° breathability • Excellent grip, soft textured NFT™ coating with ‘micro- capillaries’ channels away excessive fluid from the surface keeping hands dry and cool from inside out, providing excellent grip in oily environments • Its ergonomic design allows minimum hand fatigue, increasing productivity and comfort • The NFT™ coating is especially abrasion resistant for durability and long lasting wear
CODE
SIZE
PACK QTY CTN QTY
CODE
COLOUR
SIZE
PACK QTY CTN QTY
NITACTNFTRR
S - 2XL
12
144
NIMXCLNFTGY NIMXCLNFTFY
GREY
S-2XL
12 12
144 144
FLUORO YELLOW S-2XL
EN 388 EN 8
EN 388 EN 8
4131
4131
Cat. II
Cat. II
AUSTRALIA'S BIGGEST SELLING GLOVE
MAXIM COOL HI VIS GLOVE WITH DOTS FEATURES AND BENEFITS • 15 gauge nylon and acrylic double knitted liner offers excellent flexibility and comfort • Excellent breathability and grip, soft textured NFT™ coating with ‘micro-capillaries’ channels away excessive fluid from the surface keeping hands dry and cool from inside out, providing excellent grip in oily environments • Its ergonomic design allows minimum hand fatigue, increasing productivity and comfort • The NFT™ coating is especially abrasion resistant for durability and long lasting wear
HPT GRIP-X GLOVE FEATURES AND BENEFITS • 15 gauge nylon/spandex knitted liner
• Soft, durable and flexible micro-foam coating with a non-slip surface that repels liquid to provide the highest level of wet, oily and dry grip • Encapsulated air pockets absorb and mitigate the effects of light vibrations before it reaches the hands • Highly flexible coating and breathable nylon liner offers all-day comfort
CODE
COLOUR
SIZE PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
5
NIGRPXHPTBK NIGRPXHPTFY
BLACK
S-2XL
12 12
144 144
NIMAXCLDO
S - 2XL
12
144
FLUORO YELLOW S-2XL
18 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1
GENERAL HANDLING DRY ENVIRONMENTS
EN 388 EN 8
EN 388 EN 8
3121
3121X
Cat. II
Cat. II
TAKT NYLON PU GLOVE FEATURES AND BENEFITS • 13 gauge seamless nylon shell for enhanced dexterity • PU coat for excellent wet and dry grip • Coating provides vibration absorption for added comfort • Dark colouring to hide dirt
TAKT MICRO FOAM NITRILE GLOVE FEATURES AND BENEFITS • 13 gauge seamless nylon shell for enhanced dexterity • Micro foam nitrile coat for excellent wet and dry grip • Coating provides vibration absorption for added comfort
CODE
COLOUR
SIZE PACK QTY CTN QTY
CODE
COLOUR
SIZE PACK QTY CTN QTY
FRMICRFMNBK
BLACK
S-2XL
12 12
144 144
FRNYLONPUBK
BLACK
S-2XL
12
144
FRFNITGLVGW GREY/WHITE S-2XL
EN 388 EN 388: 2016
EN 388 EN 388:2016
4131A
3121A
EN 388 EN 388: 2003
EN 388 EN 388:2003
4231
4121
EN 1149
HYFLEX 11-818 ULTRA LITE NITRILE FOAM GLOVE FEATURES AND BENEFITS • Soft, snug 18 gauge nylon and spandex liner • Ultrathin FORTIX™ nitrile patent pending foam coating • ZONZ™ Comfort Fit Technology • Breathable nitrile patent pending foam • Clean & skin friendly CODE SIZE
HYFLEX 11-840 GLOVE FEATURES AND BENEFITS • FORTIX® nitrile foam coating • EN Abrasion Level 4 protection,
• The FORTIX® coating keeps hands cooler and drier • Ideal solution for workers who move between tasks CODE SIZE
PACK QTY CTN QTY
PACK QTY CTN QTY
5
AN1184000
6-12
12
144
11-818
6-11
12
144
bunzlsafety.com.au | 19
GENERAL HANDLING DRY ENVIRONMENTS
EN 388 EN 8
EN 388 EN 8
4120
4131
Cat. II
Cat. II
CLASSIC MULTI LITE GLOVE FEATURES AND BENEFITS • 18 gauge nylon/spandex knitted liner • Lite feather-light polyurethane coated palm and fingertips • Skin tight athletic grade nylon shell • The combination of feather-light PU coating and athletic grade shell provides a second skin sensitivity with high abrasion resistance
RUFFTEC ENDURE GLOVE FEATURES AND BENEFITS • 15 gauge nylon/spandex knitted liner • Coating with a special finish make these gloves the most durable in the industry • Outstanding abrasion resistance offers prolonged wear
CODE
COLOUR
SIZE PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
NIMLTLITEBL
BLUE
S-2XL
12
144
NIENDUREGFY
S - 2XL
12
144
EN 388 EN 8
EN 388 EN 8
3131
3131
Cat. II
Cat. II
CLASSIC MULTI FLEX GLOVE FEATURES AND BENEFITS • 15 gauge nylon/spandex knitted liner • Foam nitrile coating helps reduce hand fatigue while providing maximum comfort and dexterity • Good resistance from nicks and abrasion • Foam nitrile coating also channels away oil from the surface of the gloves, providing a sure grip in light oil applications
CLASSIC MULTI FOAM GLOVE FEATURES AND BENEFITS • 15 gauge nylon knitted liner • Foam nitrile coating helps reduce hand fatigue while providing maximum comfort and dexterity • Good resistance from nicks and abrasion • Foam nitrile coating also channels away oil from the surface of the gloves, providing a sure grip in light oil applications
CODE
SIZE
PACK QTY CTN QTY
CODE
COLOUR
SIZE PACK QTY CTN QTY
5
NIMULTIFMGY
S - 2XL
12
144
NIMLTFLEXRR
RED
12 12
144 144
S-2XL
S-XL
NIMLTFLXVRR RED/BLACK
20 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1
GENERAL HANDLING DRY ENVIRONMENTS
EN 388 EN 8
3142
Cat. II
SPLENDOR LATEX COATED GLOVE FEATURES AND BENEFITS • Seamless polyester cotton liner • Roughened latex coating for excellent wet and dry grip • Ergonomic design, snug fitting • Excellent abrasion and puncture resistance • Washable at 42°C
CODE
SIZE
PACK QTY CTN QTY
NISPLENDRGB
S - 2XL
12
144
EN 388 EN 388: 2016
3131A
EN 388 EN 388: 2003
3131
HYFLEX 11-801 FOAM NITRILE GLOVE FEATURES AND BENEFITS • Suited for slightly oily or dirty environments • Foam coating provides breathability • Independently certified as skin friendly by the Oeko-Tex® system CODE SIZE PACK QTY CTN QTY AN1180100 6-11 12 144
5
bunzlsafety.com.au | 21
GENERAL HANDLING WET & OILY ENVIRONMENTS
EN 388 EN 8
EN 388 EN 8
4131
4120
Cat. II
Cat. II
HPT GRIPX 3/4 GLOVE FEATURES AND BENEFITS • 15 gauge nylon/spandex knitted liner
MULTI-TECH DRYGUARD GLOVE FEATURES AND BENEFITS
• Soft, durable and flexible micro-foam coating with a non-slip surface that repels liquid to provide the highest level of wet, oily and dry grip • Encapsulated air pockets absorb and mitigate the effects of light vibrations before it reaches the hands • Highly flexible coating and breathable nylon liner for all-day comfort
• 15 gauge nylon/spandex knitted liner • Extra grip in oily and wet conditions • Excellent oil and water repellent properties • Reinforced knit cuff, resists stretching and provides effectiveness
CODE
SIZE
PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
NIHPTFM34
S-2XL
12
144
NIDRYGARDB3
S-2XL
12
144
EN 388 EN 8
EN 388 EN 8
4121
4121
Cat. II
Cat. II
MAXIM DRY+ GLOVE FEATURES AND BENEFITS • 18 gauge nylon/spandex knitted liner • Highly abrasion resistant for unmatched durability • Its ergonomic design allows minimum hand fatigue, increasing productivity and comfort • NFT™ coating • 3/4 deep for extra resistant to wet and oily environments
MAXIM DRY GLOVE FEATURES AND BENEFITS • 18 gauge nylon/spandex knitted liner
• Micro finish on palm area provides excellent grip • Non slippery coating without compromising flexibility • 3/4 deep for extra resistant to wet and oily environments
5
CODE
SIZE
PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
NIMAXMDRYPG
S-2XL
12
144
NIMAXDRYPP3
S-2XL
12
144
22 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1
GENERAL HANDLING WET & OILY ENVIRONMENTS
EN 388 EN 388: 2016
EN 388 EN 8
4121A
4121
EN 388 EN 388: 2003
4121
EN 1149
GLAZR GLASS GRIPPER GLOVE FEATURES AND BENEFITS
HYFLEX 11-926 MULTI-PURPOSE OIL RESISTANT GLOVE FEATURES AND BENEFITS • First HyFlex® style to combine a 3 ⁄4 dip geometry • Oil repellent and oil grip in a single flexible glove • Features a durable coating secure grip in oily environments • Fine gauge nylon fiber dipped in a 3 ⁄4 design
• 100% cotton jersey lining for comfort • Natural latex coat for enhanced grip • 100% cotton knit wrist • Knuckle coated open back • Washable at 42°C for extended use • One size fits all
CODE
SIZE
PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
FRGLSGRPRYY
XL
12
144
NN0011926
7-11
12
144
5
bunzlsafety.com.au | 23
MECHANICS / ANTI IMPACT & VIBRATION RESISTANT
EN 388 EN 8
EN 388 EN 8
2111
2111
Cat. II
Cat. II
ISA MECHANICS GLOVE (FORMERLY 'THE ORIGINAL') FEATURES AND BENEFITS
MOORDITJ MAAR MECHANICS GLOVE FEATURES AND BENEFITS • 0.8 mm premium breathable synthetic leather palm • Neoprene padded palm for vibration reduction and comfort • Perforated forchettes for increased coolness and air flow • Four way stretch spandex for full movement • Grip tab closure for increased comfort and improved fit
• 0.8 mm premium breathable synthetic leather palm • Padded palm for vibration reduction and comfort • Perforated forchettes for increased coolness and air flow • Four way stretch spandex for full movement • Grip tab closure with impact protection, increased for comfort and improved fit
CODE
COLOUR
SIZE PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
COORIGINLBB
BLACK
12 12
72 72
S-2XL
NMOORD202BB
S-2XL
6
72
COORIGINLHV FLUORO YELLOW S-2XL
EN 388 EN 8
3221
97-510 PROJEX HI VIS GENERAL PURPOSE GLOVE FEATURES AND BENEFITS
• 15 gauge nylon/spandex knitted liner • Extra grip in oily and wet conditions • Excellent oil and water repellent properties • Reinforced knit cuff, resists stretching and provides effectiveness
CODE 97-510
SIZE
PACK QTY CTN QTY
S-2XL
6
72
5
24 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1
MECHANICS / ANTI IMPACT & VIBRATION RESISTANT
EN 388 EN 8
EN 388 EN 8
2111
3121
Cat. II
Cat. II
ISA MECHANICS FINGERLESS GLOVE FEATURES AND BENEFITS • 0.8 mm premium breathable synthetic leather palm • Padded palm for vibration reduction and comfort • Perforated forchettes for increased coolness and air flow • Four way stretch spandex for full movement • Grip tab closure with impact protection for increased comfort and improved fit
SYNTHETIC RIGGER GLOVE FEATURES AND BENEFITS • 0.8 mm premium breathable synthetic leather palm • Four way stretch spandex for full movement • Economical priced alternative to leather gloves • Machine washable
CODE
SIZE
PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
COORGNLFLBB
S-2XL
12
72
CORIGMECHBB
S-2XL
12
72
EN 388 EN 8
EN 388 EN 8
2142
2132
Cat. II
Cat. II
VERSADEX LIGHT DUTY ANTI VIBRATION GLOVE FEATURES AND BENEFITS • Slim cut design for even light duty, sensitive work • PU impregnated material on palm offers great tactility • Thumb crotch for extreme durability • Palm and knuckle padding for comfort, impact protection and anti vibration • Stretch spandex with fourchettes for great fit and breathability • Slip on/off cuff design with reinforced pull tab for easy donning
GOLDEN EAGLE - LUXURY RIGGER GLOVE FEATURES AND BENEFITS • Premium deer grain palm and fingers • Curved fingers with perforated fourchettes for a snug fit and air circulation • Neoprene impact protection at wrist • Grip closure for improved fit and comfort • High abrasion resistance • Wing thumb allows better open hand pulling
CODE
COLOUR
SIZE PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
COVDEXMEKGY COVDEXMEKBK
GREY
12 12
144 144
COGLDEAGLYB
S-2XL
6
72
S-2XL S-2XL
5
BLACK
3 PACK GREY/BLUE/RED S-2XL
COVDEXPK3
1
24
bunzlsafety.com.au | 25
MECHANICS / ANTI IMPACT & VIBRATION RESISTANT
EN 388 EN 8
EN 388 EN 8
2132
3121
Cat. II
Cat. II
WINTER LUX GLOVE FEATURES AND BENEFITS • Premium deer grain palm and fingers • Curved fingers with perforated fourchettes for a snug fit and air circulation
ROXBY IMPACT PLUS GLOVE FEATURES AND BENEFITS
• Synthetic leather palm provides optimal dexterity and grip • Great impact protection - 5mm thick TPR on the fingertips • Super impact protection - 8mm thick TPR on knuckle and back • Neoprene cuff - snug fit, easy to remove • Stretch Spandex material provides breathability and comfort • Thumb crotch reinforcement provides extreme durability • Ultra grip palm for better grip and durability • ID badge and pull tab provides security and easy donning
• Black neoprene knuckle bar and wrist protection • Grip tab closure for improved fit and comfort • High abrasion resistance • Wing thumb allows unimpeaded hand movement • 3M™ Thinsulate™ lining for warmth
CODE
SIZE
PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
COGLDEGLWYB
S-2XL
6
72
COROXBYIPRR
M-2XL
6
72
EN 388 EN 388: 2016
EN 388 EN 388: 2016
3X41D
3X42D
EN 388 EN 388: 2003
EN 388 EN 388: 2003
3542
3542
Cat. II
Cat. II
BLACKWATER IMPACT GLOVE CUT LEVEL D FEATURES AND BENEFITS • Stretch spandex shell with fourchettes provides breathability, easy movement and comfort • TPR impact finger / knuckle strap plus back guard provides extra protection • Neoprene wrist with impact resistance for extra protection • Thumb crotch reinforcement provides extreme durability • Reinforced textured palm pads and fingertips for grip and durability • Adjustable closure for a perfect fit
JABIRU 360° CUT LEVEL D IMPACT GLOVE FEATURES AND BENEFITS • Reflective material for high visibility conditions
• Impact finger / knuckle strap / back guard provide extra protection • Stretch Spandex material provides breathability and comfort • Neoprene cuff - snug fit, easy to remove • Reinforced textured palm pads and fingertips for grip / durability • ID badge and pull tab provides security and easy donning
5
CODE
SIZE
PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
COBLKMECHFL
M-2XL
6
72
COJABMECHBG
M-2XL
6
72
26 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1
MECHANICS / ANTI IMPACT & VIBRATION RESISTANT
EN 388 EN 8
EN 388 EN 8
3142
2343
Cat. II
Cat. II
CHILLAGOE WINTERLINE IMPACT GLOVE FEATURES AND BENEFITS • Synthetic leather ultra grip palm for better grip and durability • 3M Thinsulate C100 with fleece insulation keeps you warm • Impact finger / knuckle strap / back guard provide extra protection • Water repellent fabric back and outside thumb • Neoprene cuff - snug fit, easy to remove • Water barrier insert keep hands dry • Extra thumb reinforcement provides more protection • ID badge and pull tab provides security and easy donning
ANTI-VIBRATION GLOVE FEATURES AND BENEFITS • ‘A’ grade premium cow grain leather • Cut level 3 protection
• Neoprene cuff with grip tab closure for comfort and protection • 2.75mm full gel padded palm and fingers for vibration absorption and comfort
CODE
SIZE
PACK QTY CTN QTY
CODE
SIZE M-XL
PACK QTY CTN QTY
COCHLMECHBB
M-2XL
6
72
COANTIVIBBW
6
72
EN 388 EN 388: 2016
EN 388 EN 388:2016
4X43CP
4X33E
Cat. II
l
MAARAKA 360 ° CUT E RIGGER GLOVE FEATURES AND BENEFITS • Goatskin leather for soft feel, better movement & comfort • 360 degree Hi-Cut Level E • Extended thumb crotch reinforcement provide extreme durability • Shirred elastic wrist for a secure fit • Adjustable grip tab for a secure, slip free fit • Kevlar thread stitching for strength and heat resistance • Winged thumb for increased flexibility and comfort CODE SIZE PACK QTY CTN QTY
ACTIVARMR 97-125 OIL & IMPACT PROTECTION GLOVE FEATURES AND BENEFITS • ActivArmr 97-125 protection with advanced bumper design • HPPE liner helps keep hands cool & comfortable • Enhanced oil grip reduces hand fatigue and injury • Double dip nitrile coating technology • HIVIZ™ design increases awareness of users for safety
5
CODE
SIZE 8-12
PACK QTY CTN QTY
CWCUTRIGEWW
M - 3XL
6
72
NN0097125
12
72
bunzlsafety.com.au | 27
COLD RESISTANT
EN 388 EN 8
EN 388 EN 8
4542
3232
EN 511
Cat. II
02X
Cat. II
COLD FIGHTER GLOVE FEATURES AND BENEFITS • Dyneema Cut level 5 protection • Contact Cold level 2 protection
HPT ICE GLOVE FEATURES AND BENEFITS • Nylon and acrylic double knitted liner • Coated palm and fingertips that remain soft and flexible in temperatures as low as -50°C • Keeps hands comfortable and flexible in cold applications • Offers outstanding dexterity and grip in cold and wet applications due to non-slip surface
• Terry lining provides warmth for temperatures down to -50°C • 3/4 dip HPT foam coating for assured water and oil repellent grip • HPT foam coating ensures a soft, spongy grip with anti-vibration properties and flexibility to function in low temperatures • Sanitised with Actifresh® to kill bacteria and promote freshness
CODE
SIZE
PACK QTY CTN QTY
CODE
COLOUR
SIZE PACK QTY CTN QTY
FRCOLDFC5BJ
M-2XL
6
72
NIICEFRZRBK NIICEFRZRFY
BLACK
S-2XL
6 6
72 72
FLUORO YELLOW M-2XL
5
28 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1
COLD RESISTANT
EN 388 EN 8
EN 388 EN 8
4131
4231
Cat. II
EN 511
X2X
Cat. II
MAXIM GLACIER GLOVE FEATURES AND BENEFITS • Nylon and acrylic double knitted liner • Ergonomic design that replicates the natural curvature of a human hand to reduce hand fatigue • Micro-finish on palm area provides excellent grip • Non-slippery coating without compromising flexibility • Absorbs perspiration to provide greater comfort and breathability • Two layer insulated liner for ultimate warmth
MULTI-TECH THERM365 GLOVE FEATURES AND BENEFITS • 15 gauge nylon/spandex knitted liner • Great all year round, especially in cooler temperatures i.e. autumn and winter • Excellent form and fit for maximum comfort • Superior grip and dexterity
CODE
SIZE
PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
NIGLACIER
S-2XL
6
72
NITHRM365BY
S-2XL
12
144
EN 388 EN 388: 2016
2231B
EN 511
12X
ACTIVARMR 97-631 COLD PROTECTION GLOVE FEATURES AND BENEFITS • PVC coating provides excellent grip and flexibility • Two-layer design • Soft and insulative acrylic interior provides comfort and warmth • ActivArmr 97-631 lets you feel everything but the cold
5
CODE
SIZE
PACK QTY CTN QTY
AN9763100BK
7-11
6
36
bunzlsafety.com.au | 29
HEAT RESISTANT & WELDING
EN 388 EN 8
EN 388 EN 8
4544
4143
EN 388
Cat. II
414X4X
Cat. II
BLACK AND GOLD WELDER GAUNTLET GLOVE FEATURES AND BENEFITS • 40cm black split cowhide cuff with Kevlar stitching • Gold half welts and self hemmed • Full jersey sock lining • Resistance to burning rated to level 4 • Resistance to contact heat rated to level 1 • Resistance to convective heat rated to level 4 • Resistance to small drips of molten metal rated to level 4
SAFEGUARD KEVLAR ® GLOVE FEATURES AND BENEFITS • Cut level 5 protection • Puncture level 4 protection • Seamless 10 gauge glass fibre blend shell for heavy duty protection • Crinkle cut latex coat for assured grip and flexibility • Excellent abrasion resistance for longevity
CODE
SIZE
PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
FRSAFEGRDYB
M-2XL
12
120
FRWELDRBGB80000
ONE SIZE FITS ALL
12
60
EN 388 EN 8
EN 388 EN 8
4143
4143
EN 388
EN 388
414X4X
414X4X
Cat. II
Cat. II
BLUE WELDER GAUNTLET GLOVE REINFORCED PALM FEATURES AND BENEFITS • 40cm blue split cowhide cuff with Kevlar stitching • Gold half welts • Self hemmed • Kevlar stitching • Full jersey sock lining • Reinforced palm, fingers and thumb for high wear areas
WELDER GAUNTLET GLOVE FEATURES AND BENEFITS • 40cm split cowhide cuff
• Gold half welts • Self hemmed • Kevlar stitching • Full jersey sock lining
CODE
COLOUR
SIZE
PACK QTY CTN QTY
CODE
SIZE
PACK QTY CTN QTY
5
FRWELDGLVBL BLUE ONE SIZE FITS ALL FRWELDGLVRR RED ONE SIZE FITS ALL
12 12
60 60
FRWELDGRPBL
ONE SIZE FITS ALL
12
60
30 | BUNZL SAFETY | SAFETY PRODUCTS CATALOGUE VOL1
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52Made with FlippingBook flipbook maker