Pirtek Catalogue

K E E P I N G Y O U M O V I N G 2 4 / 7 PRODUCT CATALOGUE

24/7 Hydraulic Service

THE FUTURE OF PIRTEK IS HERE Pirtek Centres are registered as collection points for hazardous waste. We will assist you to comply with the regulations and ensure oil waste products are dealt with legally. Pirtek has an environmental policy, which strives to minimise the impact on the environment; as a result the majority of the oil collected is recycled. Oil spill waste and related contaminated waste is considered a hazardous waste under these regulations. A system of consignment notes and licensing, administered by the Environment Agency, ensures that waste oil and oil contaminated waste are tracked from the point of generation to the point of disposal. Both temporary storage and transport of all oil spill waste must therefore be carefully documented and licensed. This includes hydraulic hoses, oil absorbent products and related products. The Pirtek Waste Care Programme provided information about the safe delivery, use, management and disposal of oils.

Pirtek Waste Care Programme Oil is a highly visible form of pollution. It harms plants and animals, damages rivers, groundwater and the soil. It can destroy natural habitats and drinking water supplies. It is the most commonly reported type of water pollution and causes over 16% of all

Environment Protection Agency (SEPA), Northern Ireland Environment Agency (NIEA) and Environment Protection Agency (EPA). Pirtek is working closely with the respective environment agencies to ensure we comply with these strict regulations and provide a safe and convenient way for our customers to dispose of used oil or oil contaminated waste. Whether you call Pirtek to site to complete a hose replacement or use our over the counter service, you can be sure that any oil contaminated waste will be dealt with in strict accordance to the regulations.

a one hectare lake. Yet with proper procedures and good practice, many of the oil pollution incidents can easily be avoided. Used mineral oil from commercial and industrial sources are classified as hazardous waste and classed as special waste under the Special Waste Regulations, which impose additional specific legal requirements for its movement, recovery and disposal. Movement of the hazardous and special waste must be accompanied by a Duty of Care Consignment Note – a copy of which must be kept by everyone involved in the transfer for 3 years, available for inspection by The Environment Agency (EA), Scottish

pollution incidents annually. Careless disposal of oil or oil contaminated waste into

drainage systems, onto land or to watercourses or groundwater is an offence, and the person responsible may be prosecuted and fined if found guilty. Because of the way it spreads, even a small quantity of oil can completely cover the surface of

Going Green! Pirtek are already hard at work ensuring our diverse fleet of vans are being replaced with new energy and oil efficient models. We are making sure the future is preserved for future generations...

DOWNLOAD THE LATEST APP Keep up-to-date with Pirtek You need fluid hose solutions fast! Find a Pirtek Store near you wherever you are in England, Wales, Scotland and Ireland. See it on the map, get quotations, access store information, send photos plus a full A to Z listing to find your nearest local store.

24/7 Hydraulic Service

PIRTEK IS... 24 HRS A DAY 7 DAYS A WEEK Offering a full variety of products with over 18,000 line items

available for next day delivery and... ...MUCH MORE. The company’s comprehensive product range includes more than 18,000 line items and covers a full variety of products and services to help keep your equipment or facility in tip-top condition. If your local Centre doesn’t have what you need in stock, they each have the expertise, experience and equipment required to manufacture a bespoke solution. Pirtek Centres also deliver a broad range of preventative services including our proven Total Hose Management programme that takes the worry out of hose maintenance.

SEE THE LATEST PIRTEK PRODUCTS AND SERVICES Pirtek Hose Centres sell ‘Matched’ hose and fittings manufactured to the highest international standards.

almost any hose assembly ‘on-site’; in a factory, on a construction site, or the side of a motorway. Response time to a customer’s call is within the hour – often much faster. The business has been built through this speed and effectiveness under pressure. Pirtek’s reputation has become synonymous with effective service to the ‘End User’ market sector. Also, through its considerable buying power, Pirtek is able to provide cost effective options for the large hose user by providing quality products at a competitive price.

Apart from being constantly accepted as a universal name synonymous with quality, Pirtek supply hydraulic products to large numbers of the world’s leading manufacturers. This ensures that Pirtek products are at the forefront of world technological innovation – a vital factor in a company’s ability to stay ahead of competition in today’s competitive climate. Each Pirtek Hose Centre carries a comprehensive stock of hoses and fittings in order to provide customers with instant ‘over-the-counter’ service. More importantly, each centre acts as the base for a number of ‘Mobile Workshops’ manned by trained technicians and capable of replacing

24/7 Hydraulic Service

WE PRIDE OURSELVES ON OUR TRAINING At Pirtek we pride ourselves on the extensive courses we offer our network of staff with a particular priority placed on Health & Safety.

Our Induction programme is accredited by City & Guilds. It is a highly intensive programme designed to ensure all of our staff members have the skills to select and assemble Pirtek products and components to the highest level. We also offer a number of tailor made courses to both our franchise centres and to our customers.

Discover the benefits of... working with a first class organisation

Pirtek was formed in 1988 and has grown to become the number one provider of fluid transfer solutions and on-site repairs Our mission is to provide the fastest and most convenient service available today – 24 hours a day, 7 days a week, 365 days a year Specialising in hydraulic hoses, pipe fittings and couplings, Pirtek has service centres and on-site teams working in UK and Europe Pirtek is committed to on-going and continuous improvement in the service we offer our customers

PIRTEK PROVIDES THE HIGHEST LEVEL OF TRAINING FOR ALL STAFF

> Centre Manager Training 4 days (2 x 2 day sessions split over 2 months) introducing the importance of Pirtek operations and quality, this course will provide you with management skills to successfully manage your team, ensuring that you have a complete understanding of Health & Safety requirements, and the knowledge of Pirtek operating systems > On-Site Management Training This course is available on request and the duration is negotiable dependant on requirements > BFPA Working safely with Hydraulic hose and connectors, BFPA Foundation course in Hydraulic Systems (BFPA minimum recommendations for hydraulics) Our training team are NEBOSH accredited

> Induction Training 10 day residential Induction training for all new Pirtek staff members, the course is broken down into several modules > Working at Height 1 day course providing a comprehensive understanding of safe practice whilst working at height in all environments > Manual Handling 1 day course introducing basic understanding of manual handling, hazards and legislation > Hydraulic Safety Awareness Providing an understanding of the hazards associated with hydraulics, different hose type, function, along with the ability to identify hose/pinhole failures and dangers of incorrect assembly/ storage/operation > Regional Customer Service/Sales Training 1 day course provides key information regarding importance of good customer service

24/7 Hydraulic Service

PIRTEK FLUID POWER GLOVE

FLUIDPOWERGLOVE DEMOLITION AWARDS WINNER FOR SAFETY INNOVATION OF THE YEAR

The Pirtek Fluid Power Glove and its unique hydraulic injection resistant technology means it is the ONLY glove available today that offers protection against hydraulic injection injury as standard. During rigorous laboratory testing at the Health & Safety Executive laboratory facilities (HSL) in Buxton, the injection resistant technology used in the Pirtek Fluid Power Glove demonstrated injection resistance at pressures up to 700 Bar (10,150 PSI) from apertures ranging in size from 0.05mm to 0.3mm using standard hydraulic oil. The lightweight design and dexterity make it a must have PPE garment for all personnel working on or around hydraulic plant or equipment.

For use in industries such as: > Agriculture > Construction & Plant > Defence > Environmental

> Transport & Logistics > Utilities > Automotive

> Manufacturing > Marine & Offshore > Materials Handling > Mining & Quarrying

Pirtek 4048 Fluid injection Resistant Glove Hydraulic injection injury is the term used to describe an injury sustained by an individual following an injection of fluid, usually while operating or inspecting pressurised hydraulic equipment. The risk of injury through hydraulic injection is common to all hydraulic equipment irrespective of the system volume and can occur at relatively low pressures. Hydraulic injection injuries are almost entirely occupational and sustained by male manual workers, both skilled and unskilled, with injuries mostly sustained to the palm or pads of the digits of the non-dominant hand. If untreated, hydraulic injection injuries can result in amputation or even death. Reference: Alan McDonald HSL (Health & Safety Laboratory) RR 976 Research report

Silicone Palm For increased grip levels even in wet environments

New design incorporates High Visibility

New Carcass Design offers improved dexterity for the user

> Puncture test > Needle stick resistance

> Abrasion resistance > Blade and cut resistance > Tear resistance

Tested in accordance with EN 388:2003. Additional protection to users include:

The Pirtek 4048 fluid power glove offers protection against fluid injection injury. Resistant up to 700BAR (10150PSI) it is only glove of its kind in the market place. Tested in accordance with EN 388 the fluid power glove is a must have for your PPE requirements and is available to order from your nearest Pirtek centre, sizes range from S to XXL: Part number PFPG2 (Size).

24/7 Hydraulic Service

PIRTEK IS... TOTAL HOSE MANAGEMENT

In 1988 Pirtek entered the UK marketplace and has grown to become the number one provider of fluid transfer solutions and on-site repairs. Specialising in hydraulic hoses, pipe fittings and couplings, Pirtek Europe has service centres and on-site teams working in Austria, Belgium, Germany, Ireland, Netherlands, Sweden and the UK.

The success of your business relies on a number of important factors. Making maximum use of the best possible resources at your disposal, harnessing the skill and experience of committed and highly-trained personnel, minimising unnecessary expenditure and being ever-watchful of cashflow. At Pirtek we can help with all of these and much more. Our Total Hose Management service effectively allows you to concentrate on what you do best, while leaving us to take care of what we do best on your company’s behalf, delivering: Reduced stockholding and improved cashflow Pro-active and preventive maintenance Better use of human resources

Contents

Section 1

2-175

Hydraulics

Section 2

176-265

Pneumatic Quick Release Couplings

Section 3

266-331

Air Preparation, Media, Monitor & Test

Section 4

332-465

KELM ™ Pneumatics

Section 5

466-577

Pneumatic & Vacuum Equipment

Section 6

578-683

Valves

Section 7

684-735

Ring Main Systems

Section 8

736-917

Adaptors & Fittings

Section 9

918-1007

Stainless Steel

Section 10

1008-1075

Malleable Iron

Section 11

1076-1259

Hose, Tubing & Couplings

Section 12

1260-1313

Clamps & Clips

Section 13

1314-1357

Sprays & Adhesives

Section 14

1358-1373

Blow Guns, Vacuum & Nozzles

Section 15

1374-1463

Pressure Wash, Fuelling & Lubrication

Section 16

1464-1495

Air Tools & Compressor Equipment

Section 17

1496-1575

Tools, Hardware & PPE

1

Section 1

1.1 Hose

4-13

Hydraulic Hose Range: PFM Isobar, Medium & High Pressure Hose, SAE, Multi Spiral, Non- Conductive, Thermoplastic, Twin Line, Gas, Suction & Delivery, Hot Water, Stainless Steel Braided & Convoluted PTFE, Rail & Railway Brake, Hydraulic Hose Protection

1.2 Fittings

16-29

Standard, JIS, JIC, NPSM, NPTF, DKL, DKS, DKO, DKM, GAZ, ORFS, Standpipes, SEA Flanges, UNF, Swage Ferrules

1.3 Adaptors

30-56

Hydraulic Adaptors: Standard, JIC, JIS, NPTF, UNO, ORFS, Swivel Adaptors, Bulkheads & Locknuts, SAE Flanges

1.4 QRCs

57-63

Tipper Truck, Trailer Brake, Valveless Water, Poppet Type, Ball Type, ISO, Push Pull, Flat Face, Tema, Caps & Plugs

1.5 Ball & Gate Valves

64-67

Mini & Full Bore Ball Valves, 2 Way & 3 Way Ball Valves, 316 Stainless Steel Ball Valves, Brass Gate Valves

2

Hydraulics

1.6 Control Valves

68-105

Rotating Couplings, Hand Pumps & Accessories, Cartridge Valves, Threaded Valves, Control Valves, CETOP Directional Control Valves & Manifolds, System Stack Valves, Coils, Electrical Connectors, Piston & Vane Pumps, Gear Pumps & Accessories, Hydraulic Valves Minimess Test Points & Adaptors, Microbore Hose, Pressure Gauges, Minimess Pressure Test Kits, Digital Pressure Gauges & Kits, Accumulator Charging Kits, Pressure Sensors, Analogue Test Equipment, Digital Dataloggers & Software, Digital Temperature & RPM Sensors, Digital Test Flow Meters, Variable Area Flow Meters, Industrial Turbine Flow Meters, Portable Filtration, Oil & Fuel Polishing System, Filter Trolleys, Particle Counters, Oil Sample Kits, Patch Test Kits, Filtration Rental

1.7 Fluid Monitoring

106-152

1.8 Filtration

153-172

Hydraulic Accessories, Filters & Strainers, Sight Glasses, Level Gauges & Indicators, Breathers, Plugs & Vent Screws, Isolator Valves, Flow Metering, High Pressure Filtration, Contamination Control, Float Level Switches

1.9 Seals & Seal Kits

173-175

Seals & Seal Kits, O Rings, Flanges, Bonded Seals, Spacers & Washers

3

Hydraulic Hose Range

PFM Isobar Construction: • Inner tube: seamless black synthetic rubber. • Cover: synthetic rubber, resistant to abrasion, oil, ozone and weathering. Application: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils, hydrocarbons, etc. Burst pressure exceeds four times working pressure. Also available with MSHA accepted cover and USCG SAE 1942 approval. Please specify PFMU for these applications. • Reinforcement: one or two braids of high-tensile steel wire • Hose specification exceeds SAE J 517 -100R1AT DIN 20022 1SN, EN 853 1SN, ISO 1436 and SAEJ 1754/B • Twin line bonded version available on request

• Reinforcement: four layers (up to 1.1/4”) or six layers (1.1/2” to 2”) of alternated, spiralled, high-tensile steel wire • Hose specification exceeds EN 856 R13, SAE J 517 (100R13) and SAEJ 1754/B

Working Pressure: 350 bar

Temperature Range: -40°C to +121°C

Spiral, 350 bar

Working Pressure: 250 bar

PFM35SX-12 PFM35SX-16 PFM35SX-20

3/4”

19.0 25.0 31.8

30.1 37.4 44.8

120 150 280

1.2 1.8 2.4

Temperature Range: -40°C to +100°C

1

1.1/4”

Hydraulics

Braided, 250 bar

Pneumatic Quick Release Couplings Air Prep., Media, Monitor & Test

Spiral, 350 bar

PFM25-04 PFM25-05 PFM25-06 PFM25-08

1/4”

6.5 8.0 9.5

12.1 13.8 15.8 20.3

45 55 60 70

0.18 0.22 0.28 0.41

5/16”

3/8” 1/2”

13.0

KELM™ Pneumatics

PFM35SX-24 PFM35SX-32

1.1/2”

38.1 50.8

57.3 71.1

300 635

4.6 6.9

2”

Pneumatic & Vacuum Equipment

• Reinforcement: four layers (up to 1) or six layers (1.1/4” to 2”) of alternated, spiralled, high-tensile steel wire • Hose specification exceeds SAE J 517 ( 100R15) and SAEJ 1754/B

Valves

Working Pressure: 420 bar

Ring Main Systems

Braided, 250 bar

Temperature Range: -40°C to +121°C

Adaptors & Fittings

PFM25-10 PFM25-12 PFM25-16

5/8” 3/4”

16.0 19.0 25.0

24.0 27.5 36.7

90

0.58 0.80 1.21

120 300

Stainless Steel

Spiral, 420 bar

1”

Malleable Iron

• Reinforcement: two braids of high-tensile steel wire • Hose specification exceeds SAE J 517 SAEJ 1754/B

PFM42SX-04 PFM42SX-06 PFM42SX-08 PFM42SX-10 PFM42SX-12 PFM42SX-16

1/4” 3/8” 1/2” 5/8” 3/4”

6.5 9.5

17.9 22.4 25.4 28.1 30.6 37.8

150 180 230 240 170 220

0.6 0.7 0.9 1.1 1.5 2.0

Hose, Tubing & Couplings

Working Pressure: 350 bar

13.0 15.9 19.0 25.4

Clamps & Clips

Temperature Range: -40°C to +100°C

1

Sprays & Adhesives

Blow Guns, Vacuum & Nozzles

Braided, 350 bar

Pressure Wash, Fuelling & Lubrication Air Tools & Compressor Equipment

Spiral, 420 bar

PFM35-04 PFM35-05 PFM35-06 PFM35-08 PFM35-10 PFM35-12

1/4”

6.5 7.7 9.5

13.8 15.0 18.0 21.4 24.6 30.2

75

0.18 0.22 0.28 0.41 0.58 0.80

5/16”

165

3/8” 1/2” 5/8” 3/4”

90

PFM42SX-20 PFM42SX-24 PFM42SX-32

13.0 15.5 18.6

130 250 310

1.1/4” 1.1/2”

32.0 38.0 51.0

49.3 57.0 72.0

300 350 700

3.5 4.6 7.0

Tools, Hardware & PPE

2”

UK 0800 38 24 38 ROI 1800 74 78 35 EMAIL info@pirtek.co.uk WEB www.pirtek.eu

4

24/7 Hydraulic Service

Hydraulic Hose Range

Medium Pressure Hose

High Pressure Hose

Construction: • Inner tube: black synthetic rubber, oil resistant • Reinforcement: one high-tensile steel braid • Cover: black synthetic rubber, resistant to abrasion, oil and weathering Application: Medium pressure hose with extreme flexibility. Recommended for hydraulic applications where a tighter bend radius is needed. Suitable for passage of mineral and vegetable oils, water-based solutions, water, air and inert gases.

Construction: • Inner tube: black synthetic rubber, oil resistant • Reinforcement: two high-tensile steel braid • Cover: black synthetic rubber, resistant to abrasion, oil and weathering Application: High pressure hose with extreme flexibility. Recommended for hydraulic applications where a tighter bend radius is needed. Suitable for passage of mineral and vegetable oils, water-based solutions, water, air and inert gases.

1SC, Single Wire

2SC, Double Wire

Hydraulics

1SC-04 1SC-05 1SC-06 1SC-08 1SC-10 1SC-12 1SC-16

2SC-04 2SC-05 2SC-06 2SC-08 2SC-10 2SC-12 2SC-16

1/4”

6.4 12.1 275 1100 45 0.18 7.9 14.0 255 1020 55 0.23 9.5 15.8 215 860 60 0.27 12.7 19.4 170 680 70 0.36 15.9 22.6 150 600 90 0.41 19.0 26.3 125 500 100 0.53 25.4 33.7 100 400 160 0.76

1/4”

6.4 13.2 400 1600 50 0.25 7.9 15.1 350 1400 55 0.30 9.5 16.7 330 1320 65 0.40 12.7 20.2 275 1100 90 0.50 15.9 24.0 250 1000 100 0.55 19.0 27.8 215 860 120 0.75 25.4 35.1 165 660 150 1.10

5/16”

5/16”

Pneumatic Quick Release Couplings Air Prep., Media, Monitor & Test

3/8” 1/2” 5/8” 3/4”

3/8” 1/2” 5/8” 3/4”

1”

1”

KELM™ Pneumatics

SAE 100R1AT

Pneumatic & Vacuum Equipment

Application: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils, hydrocarbons, etc. Burst pressure exceeds four times working pressure.

Construction: • Inner tube: seamless black synthetic rubber, oil resistant • Reinforcement: one special braid of high-tensile steel wire • Cover: synthetic rubber, resistant to abrasion, oil, ozone and weathering

Valves

Ring Main Systems

• Hose specification exceeds SAE J 517 100 R1AT ISO 1436 DIN 20022 1SN EN 853 1SN

• Hose specification exceeds SAE J 517 100 R1AT ISO 1436

Adaptors & Fittings

Temperature Range: -40°C to +150°C Discontinuous except air not higher than +121°C

Temperature Range: -40°C to +100°C

Stainless Steel

Malleable Iron

Hose, Tubing & Couplings

Clamps & Clips

Single Wire

Single Wire, High Temperature

Sprays & Adhesives

Blow Guns, Vacuum & Nozzles

100R1AT-04 100R1AT-05 100R1AT-06 100R1AT-08 100R1AT-10 100R1AT-12 100R1AT-16 100R1AT-20 100R1AT-24 100R1AT-32

100R1ATHT-04 100R1ATHT-05 100R1ATHT-06 100R1ATHT-08 100R1ATHT-10 100R1ATHT-12 100R1ATHT-16 100R1ATHT-20 100R1ATHT-24 100R1ATHT-32

1/4”

6.5 13.0 225 100 0.23 8.0 14.7 215 115 0.26 9.5 17.0 180 130 0.32 12.7 20.4 160 180 0.41 16.0 23.5 130 200 0.48 19.0 27.5 105 240 0.61

1/4”

6.5 13.0 225 100 0.20 8.0 14.7 215 115 0.25 9.5 17.0 180 130 0.32 13.0 20.1 160 180 0.42 16.0 23.2 130 200 0.48 19.0 27.2 105 240 0.61

5/16”

5/16”

Pressure Wash, Fuelling & Lubrication Air Tools & Compressor Equipment

3/8” 1/2” 5/8” 3/4”

3/8” 1/2” 5/8” 3/4”

1”

25.4 35.1 88 32.0 42.8 63 38.0 49.9 50 51.0 63.5 40

300 0.94 420 1.20 500 1.60 630 2.20

1”

25.0 35.1 88 32.0 42.8 63 38.0 49.6 50 51.0 62.5 40

300 0.91 420 1.20 500 1.50 630 2.00

1.1/4” 1.1/2”

1.1/4” 1.1/2”

Tools, Hardware & PPE

2”

2”

Or download our FREE PIRTEK APP

Follow us on

5

24/7 Hydraulic Service

Hydraulic Hose Range

SAE 100R2AT

SAE 100R6 Rayon Braided Construction: • Inner tube: seamless black NBR rubber, oil resistant • Reinforcement: one textile braid • Cover: black NBR rubber, resistant to abrasion, oil, ozone and weathering Application: Hose range suitable for applications

Construction: • Inner tube: seamless black synthetic rubber, oil resistant • Reinforcement: two braids of high-tensile steel wire • Cover: synthetic rubber, resistant to abrasion, oil, ozone and weathering Application: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils, hydrocarbons, etc. Burst pressure exceeds four times working pressure. Hose specification exceeds SAE J 517 100 R2AT ISO 1436 DIN 20022 2SN EN 853 2SN.

including low pressure hydraulic oil lines, and pneumatic lines. Will handle petroleum base hydraulic fluids, air, water, diesel fuels and lubricating oils. Hose specification conforms with SAE J 517 100R6.

Temperature Range: -40°C to +100°C

Temperature Range: -40°C to +100°C

100R6, Single Wire

Hydraulics

Double Wire, Non Skive

100R6-03 100R6-04 100R6-05 100R6-06 100R6-08 100R6-10 100R6-12 100R6-16

3/16”

5.0 11.0 35 6.5 12.7 28 8.0 14.3 28 9.5 15.9 28 13.0 19.8 28 16.0 23.0 24 19.0 27.0 21 25.0 35.0 21

50 0.10 65 0.16 75 0.19 75 0.22 100 0.30 125 0.37 150 0.47 200 0.74

1/4”

Pneumatic Quick Release Couplings Air Prep., Media, Monitor & Test

5/16”

3/8” 1/2” 5/8” 3/4”

100R2AT-04 100R2AT-05 100R2AT-06 100R2AT-08 100R2AT-10 100R2AT-12 100R2AT-16 100R2AT-20 100R2AT-24 100R2AT-32

1/4”

6.5 15.0 400 100 0.36 8.0 16.2 350 115 0.45 9.5 18.8 330 130 0.54 13.0 21.8 275 180 0.63 16.0 24.8 250 200 0.74 19.0 28.9 215 240 0.94 25.4 37.5 165 300 1.38 32.0 47.3 125 420 1.87

5/16”

3/8” 1/2” 5/8” 3/4”

1”

KELM™ Pneumatics

SAE 100R5HT, Textile Cover Construction: • Inner tube: seamless black synthetic rubber, oil resistant

1”

Pneumatic & Vacuum Equipment

1.1/4” 1.1/2”

38.0 54.5 90 51.0 66.8 80

500 2.30 630 3.16

2”

Valves

• Reinforcement: one textile braid and one braid of high-tensile steel wire • Cover: blue textile cover, resistant to abrasion, oil, ozone and weathering Application: Hose range suitable to carry mineral and vegetable oils, aqueous emulsions, water, air and inert gases. Burst pressure exceeds four times working pressure. Hose specification SAE 100R5, SAE J1402.

• Cover is MSHA approved

Ring Main Systems

Temperature Range: -40°C to +150°C Discontinuous except air not higher than +121°C

Adaptors & Fittings

Temperature Range: -40°C to +150°C

Stainless Steel

Malleable Iron

Hose, Tubing & Couplings

Clamps & Clips

Double Wire, High Temperature

Double Wire, High Temperature

Sprays & Adhesives

100R2ATHT-04 100R2ATHT-05 100R2ATHT-06 100R2ATHT-08 100R2ATHT-10 100R2ATHT-12 100R2ATHT-16 100R2ATHT-20 100R2ATHT-24 100R2ATHT-32

100R5HT-04 100R5HT-05 100R5HT-06 100R5HT-08 100R5HT-10 100R5HT-12 100R5HT-16 100R5HT-20 100R5HT-24 100R5HT-32

1/4”

6.5 15.0 400 100 0.36 8.0 16.6 350 115 0.45 9.5 19.0 330 130 0.53 13.0 22.2 275 180 0.62 16.0 25.4 250 200 0.73 19.0 29.3 215 240 0.93 25.0 38.1 165 300 1.38 32.0 48.3 125 420 1.67

3/16”

4.8 13.2 207 6.4 14.8 207

76 0.22 86 0.26

Blow Guns, Vacuum & Nozzles

5/16”

1/4”

3/8” 1/2” 5/8” 3/4”

5/16”

7.9 17.1 155 102 0.31

13/32” 10.3 19.5 138 117 0.36

Pressure Wash, Fuelling & Lubrication Air Tools & Compressor Equipment

1/2” 5/8” 7/8”

12.7 23.4 121 140 0.53 15.9 27.4 103 165 0.65

1”

22.2 31.3 55 28.6 38.0 43 34.9 44.5 34

187 0.63 229 0.90 267 1.00 337 1.48

1.1/4” 1.1/2”

1.1/8” 1.3/8”

38.0 54.3 90 51.0 67.0 80

500 2.30 630 3.16

2”

1.13/16” 46.0 56.4 24

Tools, Hardware & PPE

UK 0800 38 24 38 ROI 1800 74 78 35 EMAIL info@pirtek.co.uk WEB www.pirtek.eu

6

24/7 Hydraulic Service

Hydraulic Hose Range

Multi Spiral, DIN 20023-4 SP EN 856 4SP

100R7 Non-Conductive

Construction: • Inner tube: polyester • Reinforcement: braided high-tensile aramid fibre • Cover: orange, non-perforated, non-stick, polyurethane cover, electrically non-conductive Application: Hose range suitable for applications such as electric utility truck hydraulic systems, mobile equipment (picker, utility vehicles). Burst pressure exceeds four times working pressure. Hose specification meets or exceeds requirements of SAE J517 100 R7 Non-conductive Hose Construction.

Construction: • Inner tube: seamless black synthetic rubber, oil resistant • Reinforcement: four layers of alternated, spiralled, high-tensile steel wire over a layer of fabric • Cover: black synthetic rubber, resistant to abrasion, oils, ozone and weathering Application: Hose range suitable to carry hydraulic fluids such glycol, mineral oils, hydrocarbons, etc. Burst pressure exceeds four times working pressure. This range is particularly designed for hydraulic applications where high degree of realibility is requested. Hose specification meets or exceeds requirements of DIN 20023 4SP, SAE J 517 100 R10, EN 856 4SP.

Temperature Range: -40°C to +100°C

Temperature Range: -40°C to +121°C

Hydraulics

Four Spiral

37NC, 100R7

Pneumatic Quick Release Couplings Air Prep., Media, Monitor & Test

DIN4SP-04 DIN4SP-06 DIN4SP-08 DIN4SP-10 DIN4SP-12 DIN4SP-16 DIN4SP-20 DIN4SP-24 DIN4SP-32

1/4” 3/8” 1/2” 5/8” 3/4”

6.5 17.8 450 150 0.64 9.5 20.0 445 180 0.75 13.0 23.8 425 230 0.89 16.0 27.6 400 250 1.10 19.0 31.9 350 300 1.50 25.0 39.4 320 340 2.00 32.0 50.8 210 460 3.10 38.0 57.2 185 560 3.65 51.0 69.8 165 660 4.95

37NC-03 37NC-04 37NC-05 37NC-06 37NC-08 37NC-12 37NC-16

3/16”

4.8 11.4 210 6.4 13.7 192 7.9 15.6 175 9.5 18.4 157 12.7 22.5 140 19.0 25.8 87 25.0 36.7 70

20 0.07 32 0.09 45 0.11 51 0.14 75 0.21 127 0.30 203 0.40

1/4”

5/16”

3/8” 1/2” 3/4”

KELM™ Pneumatics

1”

Pneumatic & Vacuum Equipment

1.1/4” 1.1/2”

1”

2”

Thermoplastic, 100R8

Valves

Multi Spiral, DIN 20023-EN 856 4SH Construction: • Inner tube: seamless black synthetic rubber, oil resistant • Reinforcement: four layers of alternated, spiralled, high-tensile steel wire over a layer of fabric • Cover: black synthetic rubber, resistant to abrasion, oils, ozone and weathering Application: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils, hydrocarbons, etc. Burst pressure exceeds four times working pressure. This range is particularly designed for hydraulic applications where a high degree of realibility is requested. Hose specification meets or exceeds requirements of DIN 20023 4SH, EN 856 4SH.

Construction: • Inner tube: nylon • Reinforcement: braided high-tensile aramid fibre • Cover: orange, non-perforated, non-stick, polyurethane cover, electrically non-conductive Application: Hose range suitable for applications such as electric utility truck hydraulic systems, mobile equipment (picker, utility vehicles). Burst pressure exceeds four time working pressure. Hose specification meets or exceeds requirements of SAE J517 100R8 Non-conductive Hose Construction.

Ring Main Systems

Adaptors & Fittings

Stainless Steel

Malleable Iron

Temperature Range: -40°C to +93°C

Hose, Tubing & Couplings

Temperature Range: -40°C to +121°C

Clamps & Clips

Sprays & Adhesives

Blow Guns, Vacuum & Nozzles

3888

Four Spiral

Pressure Wash, Fuelling & Lubrication Air Tools & Compressor Equipment

3888-03 3888-04 3888-06 3888-08 3888-12 3888-16

3/16”

4.8 14.6 350 6.4 16.8 350 9.5 20.3 280

38 0.11 51 0.17 64 0.22

DIN4SH-12 DIN4SH-16 DIN4SH-20 DIN4SH-24 DIN4SH-32

1/4” 3/8” 1/2” 3/4”

3/4”

19.0 31.6 425 280 1.50 25.0 38.0 400 340 2.00 32.0 45.0 350 460 2.45 38.0 53.1 300 560 3.00 51.0 68.0 250 700 4.50

1”

12.7 24.6 245 102 0.28 19.1 33.0 155 165 0.38 25.4 38.6 138 245 0.57

1.1/4” 1.1/2”

Tools, Hardware & PPE

1”

2”

Or download our FREE PIRTEK APP

Follow us on

7

24/7 Hydraulic Service

Hydraulic Hose Range

Thermoplastic, 100R8 3882

3890 Twin Line

Construction: • Inner tube: nylon • Reinforcement: braided synthetic fibre • Cover: black perforated polyurethane resistant to oil, ozone and weathering Application: Hose range suitable for applications such as general hydraulic systems, high pressure chemical transfer, hydraulic tools, mobile equipment. Burst pressure exceeds four times working pressure. Hose specification meets or exceeds requirements of SAE 100 R8.

Construction: • Inner tube: nylon • Reinforcement: braided high-tensile aramid fibre • Cover: black perforated polyurethane resistant to oil, ozone and weathering Application: Hose range suitable for applications such as general hydraulics, high pressure gas and chemical transfer, machine tools, mobile equipment, agricultural equipment, marine steering. Burst pressure exceeds four times working pressure. Hose specification meets or exceeds requirements of SAE 100 R8.

Temperature Range: -40°C to +93°C

Temperature Range: -40°C to +93°C

3882, Single Line

Hydraulics

3882-03 3882-04 3882-05 3882-06 3882-08 3882-10 3882-12 3882-16

3/16”

4.8 10.0 350 6.4 11.8 350 8.0 14.3 325 9.5 16.0 280 13.0 20.0 245

35 0.07 50 0.08 60 0.12 70 0.14 95 0.22

Pneumatic Quick Release Couplings Air Prep., Media, Monitor & Test

1/4”

3890, Twin Line

5/16”

3/8” 1/2” 5/8" 3/4”

16.0 23.5 195 125 0.26 19.1 26.5 165 150 0.35 25.4 34.7 145 200 0.50

3890-04 3890-06 3890-08

1/4” 3/8” 1/2”

6.4 15.9 345 9.5 19.4 276

51 0.34 64 0.44

KELM™ Pneumatics

1”

12.7 22.7 241 102 0.56

Pneumatic & Vacuum Equipment

Thermoplastic, 100R8HP Construction: • Inner tube: polyester • Reinforcement: braided aramid fibre • Cover: black polyurethane, resistant to oil, ozone and weathering • Other cover materials and colours available Application: Hose range suitable for applications such as general hydraulic systems, hydraulic tools, mobile equipment. Burst pressure exceeds four times working pressure. Hose specification meets or exceeds requirements of SAE 100 R8.

Valves

Ring Main Systems

Adaptors & Fittings

Stainless Steel

Temperature Range: -40°C to +93°C

Working temperature of air, water and fluids containing water: +65°C

Malleable Iron

Hose, Tubing & Couplings

Clamps & Clips

Sprays & Adhesives

Blow Guns, Vacuum & Nozzles

10,000 psi Hose (100R8) Single Line

Pressure Wash, Fuelling & Lubrication Air Tools & Compressor Equipment

100R8HP-04 100R8HP-06

1/4” 3/8”

6.4 14.8 700 9.7 18.0 700

50 0.16 90 0.21

Tools, Hardware & PPE

UK 0800 38 24 38 ROI 1800 74 78 35 EMAIL info@pirtek.co.uk WEB www.pirtek.eu

8

24/7 Hydraulic Service

Hydraulic Hose Range

Thermoplastic, 100R7LT

Thermoplastic, 100MTH1LT

Construction: • Inner tube: nylon lined • Reinforcement: spiralled or braided synthetic fibre • Cover: black perforated polyurethane, resistant to oil, ozone and weathering Application: Hose range suitable for applications such as general hydraulics, material handling, forklift, high pressure gas transfer, chemical transfer. Burst pressure exceeds four times working pressure. Hose specification meets or exceeds requirements of SAE 100 R7.

Construction: • Inner tube: smooth seamless polyester tube • Cover: black non-perforated polyurethane, resistant to oil, ozone and weathering • Reinforcement: single braid of high tensile steel wire Application: Hose range suitable for applications such as general hydraulics, high pressure hydraulic systems, machine tools, mobile equipment, agricultural equipment, marine steering. Burst pressure exceeds four times working pressure. NB: the working and test pressures for this hose family are higher than 100R1/R7 standard. Therefore this hose exceeds the performance set forth in the SAE J517 100 R7 series hydraulic hose.

Temperature Range: -54°C to +100°C

Temperature Range: -54°C to +100°C

Hydraulics

100R7LT, Single Line

Pneumatic Quick Release Couplings Air Prep., Media, Monitor & Test

100MTH1LT, Single Line

100R7LT-03 100R7LT-04 100R7LT-05 100R7LT-06 100R7LT-08

3/16”

4.8 10.0 210 6.4 11.8 200 8.0 14.3 190 9.7 16.0 175 13.0 20.3 140

30 0.07 35 0.09 45 0.13 55 0.15 75 0.22

1/4”

5/16”

100MTH1LT-03 100MTH1LT-04 100MTH1LT-05 100MTH1LT-06 100MTH1LT-08

3/16”

4.8 10.0 325 6.4 11.9 300 8.0 14.0 240 9.5 16.0 225 13.0 19.2 175

30 0.13 40 0.17 50 0.22 60 0.26 75 0.33

3/8” 1/2”

1/4”

KELM™ Pneumatics

5/16”

3/8” 1/2”

Pneumatic & Vacuum Equipment

Twin Line, 100R7LT

Construction: • Inner tube: polyurethane • Reinforcement: braided synthetic fibre • Cover: black perforated polyester, resistant to oil, ozone and weathering Application: Hose range suitable for applications such as forklifts working in cold storage areas, general hydraulics, mobile equipment, lift truck hydraulic systems, cold temperature motion control. Burst pressure exceeds four times working pressure. Hose specification meets or exceeds requirements of SAE 100 R7.

Valves

Ring Main Systems

Adaptors & Fittings

Stainless Steel

Temperature Range: -54°C to +100°C

Malleable Iron

Hose, Tubing & Couplings

Clamps & Clips

100MTH1LT, Twin Line

Sprays & Adhesives

100MTH1LT-03-03 3/16”

4.8 10.0 325 6.4 11.9 300 8.0 14.0 240 9.5 16.0 225 13.0 19.2 175

30 0.26 40 0.34 50 0.44 60 0.52 75 0.66

Blow Guns, Vacuum & Nozzles

100MTH1LT-04-04

1/4”

100R7LT, Twin Line

100MTH1LT-05-05 5/16”

100MTH1LT-06-06 100MTH1LT-08-08

3/8” 1/2”

Pressure Wash, Fuelling & Lubrication Air Tools & Compressor Equipment

100R7LT-03 100R7LT-04 100R7LT-05 100R7LT-06 100R7LT-08

3/16”

4.8 10.0 210 6.4 11.8 200 8.0 14.3 190 9.7 16.0 175 13.0 20.0 140

30 0.14 35 0.18 45 0.26 55 0.31 76 0.44

1/4”

5/16”

Tools, Hardware & PPE

3/8” 1/2”

Or download our FREE PIRTEK APP

Follow us on

9

24/7 Hydraulic Service

Hydraulic Hose Range

High Pressure Gas Hose

Suction & Delivery Hose

Construction: • Inner tube: black, smooth bore, synthetic rubber, resistant to LPG and propane • Reinforcement: two braids of high-tensile steel wire • Cover: black, wrapped, weather and flame resistant, pin-pricked, special synthetic rubber Relevant Standards & Reference Documents: • EN 853 – rubber hoses and hose assemblies, wire braid reinforced hydraulic type • EN 559 – gas welding equipment, rubber hoses for welding, cutting and allied processes

Construction: • Inner tube: smooth black rubber • Reinforcement: synthetic textile braid and embedded steel helix wire • Cover: smooth black, resistant to oil, abrasion and weathering Application: Hose range suitable for the conveyance of mineral oils and fuels, to be used either in a suction or delivery application. Burst pressure exceeds three times working pressure. Hose specification in accordance to ISO 1307 and SAE 100S4.

Temperature Range: -30°C to +80°C

Temperature Range: -20°C to +60°C

100S4

Hydraulics

100S4-12 100S4-16 100S4-20 100S4-24 100S4-28 100S4-32 100S4-36 100S4-40 100S4-48 100S4-56 100S4-64

3/4"

19 25

29 35 42 48 55 61 67

10 10 10 10 10 10 10 10 10 10 10

76 0.41 100 0.76 128 0.90 152 1.05 180 1.22 204 1.35 228 1.51 252 2.11 304 2.52 360 3.14 408 3.50

Pneumatic Quick Release Couplings Air Prep., Media, Monitor & Test

100GMH

1"

1.1/4 32 1.1/2 38 1.3/4 45

100GMH-04 100GMH-06

1/4” 3/8”

6.0 15.0 400 100 0.39 9.5 18.9 330 130 0.58

2"

51

2.1/4 57

KELM™ Pneumatics

2.1/2 63.5 75

3"

76

88

Pneumatic & Vacuum Equipment

3.1/2 90

104

4"

102 116

Valves

Construction: • Inner tube: smooth black rubber • Reinforcement: synthetic high strength textile yarn plus copper wire embedded helix • Cover: smooth black, resistant to oil, abrasion and weathering Application: Hose range suitable for the conveyance of mineral based hydraulic fluids to be used either in a suction or delivery application. Burst pressure exceeds four times working pressure on hose bore 3/4” to 2”, three times working pressure on bore size 2.1/2” to 4”. Hose specification in accordance to SAE J517 type SAE 100R4.

Ring Main Systems

Adaptors & Fittings

Stainless Steel

Temperature Range: -40°C to +100°C

Malleable Iron

Hose, Tubing & Couplings

Clamps & Clips

Sprays & Adhesives

100R4

Blow Guns, Vacuum & Nozzles

Pressure Wash, Fuelling & Lubrication Air Tools & Compressor Equipment

100R4-12 100R4-16 100R4-20 100R4-24 100R4-32 100R4-40 100R4-48 100R4-64

3/4"

19 25

35 41 51 57 70 83 95

21 17 14 10

125 0.74 150 0.87 200 1.04 255 1.27 300 1.62 355 2.12 460 2.50

1"

1.1/4 32 1.1/2 38

2"

51

7 4 4

2.1/2 63

Tools, Hardware & PPE

3" 4"

76

102 121 2.5 610 4.10

UK 0800 38 24 38 ROI 1800 74 78 35 EMAIL info@pirtek.co.uk WEB www.pirtek.eu

10

24/7 Hydraulic Service

Hydraulic Hose Range

Hot Water, Single Wire Construction: • Inner tube: seamless synthetic rubber, resistant to high temperatures and detergent fluid • Reinforcement: one braid of high-tensile steel wire • Cover: synthetic rubber, pin-pricked, resistant to abrasion, oil, ozone and weathering • Colours available: black (B), blue (K), grey (G) Application:

Hot Water, Double Wire Construction: • Inner tube: seamless synthetic

Application: Hose range suitable for water cleaning applications and a wide range of benefits such as high flexibility, low weight, high abrasion resistance, small bend radius and excellent resistance to the most common detergent solutions. The constant working pressure through all sizes offers easy choice avoiding any kind of misunderstanding. Burst pressure exceeds four times working pressure.

Hose range suitable for water cleaning applications and a wide range of benefits such as high flexibility, low weight, high abrasion resistance, small bend radius and excellent resistance to the most common detergent solutions. The constant working pressure through all sizes offers easy choice, avoiding any kind of misunderstanding. Burst pressure exceeds four times working pressure.

rubber, resistant to water and detergents in aqueous solutions • Reinforcement: two braids of high-tensile steel wire • Cover: synthetic rubber, resistant to abrasion, oils, and weathering • Colours available: black (B), blue (K), grey (G)

Temperature Range: -40°C to +150°C

Temperature Range: -40°C to +150°C

Hydraulics

HTP 40, Black

Pneumatic Quick Release Couplings Air Prep., Media, Monitor & Test

HTP 15, Black

HTP40B-04 HTP40B-05 HTP40B-06 HTP40B-08

1/4”

6.4 15.0 400 100 0.37 7.9 16.6 400 110 0.44 9.5 19.0 400 120 0.56 12.7 22.2 300 160 0.65

HTP15B-04 HTP15B-05 HTP15B-06 HTP15B-08

1/4”

6.4 13.5 150 100 0.17 7.9 14.5 150 110 0.19 9.5 16.9 150 120 0.22 12.7 20.5 150 160 0.33

5/16”

5/16”

KELM™ Pneumatics

3/8” 1/2”

3/8” 1/2”

Pneumatic & Vacuum Equipment

Stainless Steel Braided PTFE Hose Construction: • Extruded Teflon manufactured from

Application: Hose range suitable for water cleaning applications and a wide range of benefits such as high flexibility, low weight, high abrasion resistance, small bend radius and excellent resistance to the most common detergent solutions. The constant working pressure through all sizes offers easy choice avoiding any kind of misunderstanding. Burst pressure exceeds four times working pressure.

Construction: • Inner tube: seamless synthetic rubber, resistant to water and detergents in aqueous solutions • Reinforcement: one braid of high-tensile steel wire • Cover: synthetic rubber, resistant to abrasion, oils, and weathering • Colours available: black (B), blue (K), grey (G)

Application: Hose range has excellent mechanical resistance for vibration and flexing. FDA approved resin that guarantees food, cosmetic and pharmaceutical, as well as laundry equipment, plastic moulding presses and compressor discharge applications. Burst pressure exceeds three times working pressure.

Valves

virgin PTFE resin with AISI 304 stainless steel, high-tensile braid • Antistatic version available on request

Ring Main Systems

Adaptors & Fittings

Temperature Range: -70°C to +260°C

Stainless Steel

Temperature Range: -40°C to +150°C

Malleable Iron

Hose, Tubing & Couplings

Clamps & Clips

100STX, Smooth, Teflon

Sprays & Adhesives

Blow Guns, Vacuum & Nozzles

HTP 21, Black

100STX-03 100STX-04 100STX-05 100STX-06 100STX-08 100STX-10 100STX-12 100STX-16

3/16"

5.1 6.7 8.4

8.05 9.34

264 224 207 183 161 114 103

64 76

1.4"

Pressure Wash, Fuelling & Lubrication Air Tools & Compressor Equipment

5.16"

11.05 13.40 16.60 19.85 23.15 29.75

102 127 152 178 203 305

3/8" 1/2" 5/8" 3/4"

10.3 13.4 16.6 19.8 26.1

HTP21B-04 HTP21B-05 HTP21B-06 HTP21B-08

1/4”

6.4 13.4 210 100 0.21 7.9 15.0 210 110 0.26 9.5 17.4 210 120 0.34 12.7 20.6 180 160 0.41

5/16”

3/8” 1/2”

1"

80

Tools, Hardware & PPE

Or download our FREE PIRTEK APP

Follow us on

11

24/7 Hydraulic Service

Hydraulic Hose Range

Convoluted PTFE Hose

Rail Hose

Application: Hose range is ideal for fluid and gas systems, chemical transfer, steam, air, water solvents and suction applications. It is abrasion resistant and can be used with most types of industrial lubricants, coolants, acids, oils and solvents. An exceptionally versatile hose, it can do the job of many different hose types, helping to minimise stocks. Burst pressure exceeds three times working pressure.

Construction: • Inner tube: convoluted PTFE Teflon • Cover: AISI 304 stainless steel single wire braid

Construction: • Hose type: 2SN, exceeding EN857 and SAE 100R16

• Inner tube: oil-resistant synthetic rubber • Reinforcement: two high-tensile steel braids • Cover: black, made with abrasion and ozone-resistant synthetic rubber • Certification: hose crtified EN45545-2 (HL2-R23)

Temperature Range: -40°C to +100°C (up to +120ºC intermittent)

Temperature Range: -54°C to +204°C

100SCX

2SN, Double Wire

Hydraulics

Pneumatic Quick Release Couplings Air Prep., Media, Monitor & Test

100SCX-04 100SCX-06 100SCX-08 100SCX-10 100SCX-12 100SCX-16 100SCX-20 100SCX-24 100SCX-32

PRH2N-04 PRH2N-05 PRH2N-06 PRH2N-08 PRH2N-10 PRH2N-12 PRH2N-16

1/4" 3/8" 1/2" 5/8" 3/4"

6.10 9.60 172 9.50 13.60 138 12.45 18.50 103 15.70 22.90 83 19.00 25.50 69 25.50 34.15 46

18 20 25 51 64 89

28 28 28 28 28 20 12 10

1/4”

6.6 13.4 450 1800 45 0.27 8.3 15.0 420 1680 60 0.31 9.9 17.0 385 1540 70 0.39 13.0 20.7 345 1380 90 0.52 16.4 23.6 290 1160 130 0.61 19.5 27.7 280 1120 160 0.79 26.0 35.6 200 800 210 1.15

5/16”

3/8” 1/2” 5/8” 3/4”

1"

KELM™ Pneumatics

1.1/4 31.50 40.60 34 1.1/2 38.00 48.50 30

125 152 200

1”

2"

50.90 61.40 23

5

Pneumatic & Vacuum Equipment

Railway Brake Hose

Relevant Standards & Reference Documents: • UIC 830-1/V: 1981 – technical specification for the supply of elastomer hoses for compressed air brake supply • DIN 5510-2: 1991 – preventative fire protection in railway vehicles

Valves

Ring Main Systems

Temperature Range: -40°C to +70°C

Adaptors & Fittings

Stainless Steel

Malleable Iron

Hose, Tubing & Couplings

FBU

Clamps & Clips

Sprays & Adhesives

FBU-28.5

28

44.8

200

1.15

Blow Guns, Vacuum & Nozzles

Pressure Wash, Fuelling & Lubrication Air Tools & Compressor Equipment

Tools, Hardware & PPE

UK 0800 38 24 38 ROI 1800 74 78 35 EMAIL info@pirtek.co.uk WEB www.pirtek.eu

12

24/7 Hydraulic Service

Hydraulic Hose Protection

Plastic Spiral Guard Anti-burst,

Fire Guard

Abrasion Resistant

Plastic spiral sleeve with rounded profile, covers hose without leaving any large portion unprotected. Inner core assures flexibility whilst the external profile provides good abrasion resistance.

Woven high bulk fibreglass fibre with thick covering of iron oxide, red silicone rubber. Can shed molten metal splash and withstand intense radiant heat. Ideal for protecting hoses and cables in steel mills, aluminium smelting plants, offshore drilling rigs, foundries and glass manufacturing facilities. Protects operators and maintenance personnel against burns while insulating against costly energy losses. Applications include rubber vulcanisation operations, printing presses, injection moulding plants – anywhere hot steam or oil lines are used.

Contains spillage when hoses or tube are damaged. Tests performed to the SAE J343 standard have shown an oil retention capability seven times better than any similar product. Provides a high level of abrasion and fire resistance and passes the abrasion test in accordance with ISO 6945. Also passes severe flammability tests such as the American MSHA IC-207/01 and ISO 8030 requirements.

Temperature Range: From +260°C continuous exposure, up to +1090°C for 15-20 minutes and up to +1640°C for 15-30 seconds

Spiralguard, SGX Range

SGX-13 SGX-16 SGX-20 SGX-25 SGX-28 SGX-32 SGX-35 SGX-50 SGX-90

13 16 20 25 28 32 35 50 90

Hydraulics

Hoseguard Range

Pneumatic Quick Release Couplings Air Prep., Media, Monitor & Test

FJI Range

TEXS-17N TEXS-20N TEXS-23N TEXS-25N TEXS-31N TEXS-36N TEXS-40N TEXS-44N TEXS-47N TEXS-53N TEXS-73N TEXS-93N TEXS-112N

17 20 23 25 31 36 40 44 47 53 73 93

FJI-14 FJI-16 FJI-18 FJI-19 FJI-22 FJI-24 FJI-25 FJI-35 FJI-45 FJI-57 FJI-70

14 16 18 19 22 24 25 35 45 57 70

KELM™ Pneumatics

Pneumatic & Vacuum Equipment

Valves

Ring Main Systems

112

Adaptors & Fittings

Armour Wire Spring Guard

Stainless Steel

Open coil galvanised steel wire. 10mm or 12mm pitch dependent on ID. 3.25mm wire size. Suitable for covering braided or spiral hose where the application is of an abrasive nature.

Malleable Iron

For Braided Hose, FCS Range

Hose, Tubing & Couplings

FCS-015 FCS-017 FCS-019 FCS-023 FCS-026 FCS-046 FCS-058 FCS-070

15 17 19 23 26 46 58 70

Clamps & Clips

Sprays & Adhesives

Blow Guns, Vacuum & Nozzles

For Spiral Hose, FCS Range

Pressure Wash, Fuelling & Lubrication Air Tools & Compressor Equipment

FCS-021 FCS-029 FCS-034 FCS-041

21 29 34 41

Tools, Hardware & PPE

Or download our FREE PIRTEK APP

Follow us on

13

24/7 Hydraulic Service

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139 Page 140 Page 141 Page 142 Page 143 Page 144 Page 145 Page 146 Page 147 Page 148 Page 149 Page 150 Page 151 Page 152 Page 153 Page 154 Page 155 Page 156 Page 157 Page 158 Page 159 Page 160 Page 161 Page 162 Page 163 Page 164 Page 165 Page 166 Page 167 Page 168 Page 169 Page 170 Page 171 Page 172 Page 173 Page 174 Page 175 Page 176 Page 177 Page 178 Page 179 Page 180 Page 181 Page 182 Page 183 Page 184 Page 185 Page 186 Page 187 Page 188 Page 189 Page 190 Page 191 Page 192 Page 193 Page 194 Page 195 Page 196 Page 197 Page 198 Page 199 Page 200

Made with FlippingBook - Online magazine maker