Operations Manual
6. Enter the 6-digit run code provided by the D-Tech operations team, and click connect, if successful “connected” will be displayed. If it does not, check that the run code is correct and verify that the computer is connected to the internet. Some Wi-Fi networks have firewalls which block the connection, try a different network if available. 7. You should now see the status under the WITS data feed displaying ‘Success’ and a data process time. 8. Under the hydraulics section, enter the tool size from the drop-down menu. 9. Add the TFA, mud weight in ppg, flow restrictor if used (0 if no restrictor is used), and the motor bearing loss. (Refer to Figure 7) 10. In the Misc section, click "Enable Pump 3." If three pumps are being used, click handshake if the WITS feed is from a source that requires a handshake to remain open, for example Pason EDR. 11. If running without an MWD system, the button on the top of the wits box will need to be moved to the ‘On’ position and the ‘Handshake’ box in the bottom left needs to be checked. 12. If the rig is configured with 3 pumps ‘Enable Pump 3’ by checking the box. IF THIS IS NOT CHECKED DOWNLINK DECODING WILL NOT WORK CORRECTLY 13. Move to the WITS Decoder Tab. For the data to populate, you will need to fill in all the grey boxes on the screen with data. 14. Under ‘Operation’ from the pull-down menu select the current operation 15. Now fill in the run number, BHA number and the motor rev/gallon, put 0 if not running a motor. Once these are selected the logging box should change from Off to On (Refer to Figure 8)
OPS-FIELD-001 | Rev. H
dtechdrilling.com | 23
Made with FlippingBook Digital Publishing Software