Operations Manual
4. When ready, and after the pumps have been on and pressure has stabilized for 90 seconds, press the Start button and follow the procedure to send a downlink to the tool. For best downlink practices See Appendix E for Best Practices Note – Remember to check your WITS decoder to verify that the downlink was transmitted properly. Note – If it is required to lower the flow rate for any reason outside of down linking, it is best practice to shut down the pumps and then bring the pumps up to the new flow rate.
Figure 9
OPS-FIELD-001 | Rev. H
dtechdrilling.com | 26
Made with FlippingBook Digital Publishing Software