Operations Manual
The D-Tech RST cannot be serviced on location and must be returned to a D-Tech Service Facility for maintenance and post run analysis. Re-Running the D-Tech System It is generally recommended to discuss the viability of re-running after the RST has reached 75 combined drilling and circulating hours downhole. If you are unsure whether a tool should or could be reused, please consult with the D-Tech operations team. Real-Time RST Operations
The D-Tech RST can be configured to enable real-time data transmission by incorporating an uplink kit into the standard tool setup, as shown below.
The uplink kit consists of a redesigned turbine shroud, flow diverter, wire bypass
OPS-FIELD-001 | Rev. H
dtechdrilling.com | 48
Made with FlippingBook Digital Publishing Software