Dosing
Static Mixer (STATIFLO)
Static Mixer Statiflo motionless mixers offer many key benefits for combing miscible and immiscible liquids, liquids with gases and gas blend- ing. They are efficient and economical, delivering precise, predetermined results in laminar and turbulent flow mixing, blending, dispersion and emulsion formation, laminar flow heat exchange , mass transfer, and as an inline reactor promoting ‘plug flow’. Statiflo motionless mixers are maintenance free devices. Installation and operation costs are minimised. As well as direct oper- ating savings, Statiflo motionless mixers deliver a high level of mixing efficiency, therefore the consumptions of dosed chemicals and formation of by-products can be dramatically reduced. No straight pipe lengths upstream or downstream of the mixer are required. This means inline sampling can be performed immediately after the mixer - allowing any necessary adjustments to be made as quickly as possible - minimising potential product waste.
S400 - Statiflo Mixers A standard design, pressure drop curves available Three element mixer design, spigot ends
CODE
SIZE
STAT-GRY-25-3
DN25
STAT-GRY-40-3
DN40
STAT-GRY-50-3
DN50
STAT-GRY-80-3 DN80 STAT-GRY-100-3 DN100
Static Mixer (STATIFLO) Custom Options available on request
‘S’ Type Mixers A standard design static mixer, pre manufactured with flanged ends and one injection boss. Three
or four elements can be supplied depending on the flow regime. Available in PVC-U & Stainless Steel materials of construction
Custom Engineered S100 to S650
Non Ragging Mixer A high performance non ragging static mixer for difficult sludge and wastewater applications, specifically designed for flows with a high content of rags and/or highly fibrous material.
Desal (DSM) Mixer The very latest techniques for design and modelling have been used to develop the Statiflo Desal- Mixer (DSM) for turbulent flow dosing and blending applications in the pre-treatment and post-treat- ment stages of water treatment in desalination processes. The Statiflo DSM has been independently tested for pressure drop and mixture quality (measured by coefficient of variation — CoV) by BHR Group, world leaders in fluid engineering, research and consultancy. Mixers have been tested at industry realistic fluid velocities and additive ratios, and have consistently demonstrated the ability to produce mixture qualities exceeding industry standard.
1300 PIPING (1300 747 464)
V 4.1
PAAS Source Book 237
Made with FlippingBook - Online catalogs