LÍMFRAUÐ FYRIR EINANGRUNARPLÖTUR
1-component polyurethane foam for the attachment of insulation panels to façades as per DIN EN 13163
Tried-and-tested product features
• General construction approval from the German Institute for Construction Technology • Test certificate for construction class B1 as per DIN 4102-1:1998-05 of the Material Testing Institute in Hanover Cost and work reduction • Minimal material consumption • Transport and storage savings • No need for time-intensive mortar application • Enables additional heating insulation High initial adhesion, even at low temperatures • Does not flow, but rather forms a stable and high-adhesion bead of adhesive immediately • Not sensitive to low temperatures
attachment of attic insulation, the mounting of so̅ts and casings, the adhesion of masonry edging strips etc. Remarks: Sticks to Styrofoam, Styrodur, mineral wool, hard polystyrene and polyurethane foam, corrosion-protected steel plates, fiber cement, aerated concrete, chipboard, hard PVC, brick, plaster, wood and dispersion paints, but not to polyethylene, silicone or PTFE.
Contents in ml
Art. No.
P. Qty.
0892 400 10
800
1/12
Areas of application: Suitable for the adhesion of insulation plates in outside façades, interior walls and insulation and drainage elements. Thanks to its outstanding adhesive properties, reduced foaming and quick final strength, this façade adhesive is suitable for a large number of other adhesive applications involving insulation panels. Examples include the
Technical data: Basis
Self-adhesive polyurethane adhesive
Substrate and environment temperature
+5°C to +30°C -40°C to +90°C
Temperature resistance Non-sticky surface*
5–10 min
1.5 – 5 h, depending on the temperature and humidity
Hardening time*
Additional articles: PURLOGIC ® Xpress/ Combipress Foam Gun Art. No. 0891 152 4 / 0891 152 6 PURLOGIC ® Clean Art. No. 0892 16 / 0892 160
Released-foam yield
43–47 liters 0.029 W/m K 0.15–0.18 MPa 0.04–0.05 MPa
Thermal conductivity* (DIN 52612)
Tensile strength (DIN 53455)
Compressive strength (DIN 53421) *Measured at 20°C and 65% humidity.
Pump Spray Bottle Art. No. 0891 501
41
Made with FlippingBook Learn more on our blog