SUSPENSION
Coarse Thread Weight Jack Bolts Weight jack bolts have 1"-8 threads for quick adjust- ment. Use with ALL56113, ALL56114, and ALL56115 style spring plates. Part No. Description ALL56106 8" Steel ALL56107 11" Steel Weight Jack Bolts with Internal Thread Bolts have a 7/16"-20 internal thread on one end for use with bolt-on and swiveler spring cups. Coarse thread bolts have 1"-8 outer threads ZKLOH¿QHWKUHDGEROWVDUH Coarse Thread 1"-8 with 3/4" Hex Part No. Description ALL56094 4" Steel ALL56095 6" Steel ALL56066 8" Steel ALL56067 11" Steel Fine Thread 1-1/8"-12 with 1/2" Square Drive Part No. Description
Tubular Lower Control Arms – Flat Bottom Heavy-duty control arms are made with 1-1/4" D.O.M. tubing and 1" D.O.M. cross bracing. Flat bottom design works with 5" or 5-1/2" conventional springs which must be mounted with the closed end seated in the control arm and the open end in the upper spring cup or a spring ramp (sold separately) may be welded onto the lower plate to place the open end down. Black powder-coated arms feature high-quality rod ends and separate shock bracket which will require welding or bolting onto arm. Rod end spacer kit is required to accept stock-style lower ball joints. Press-In Ball Joint Control Arms (Use ALL56212) Part No. Description ALL56320 RH, ’64-72 Chevelle ALL56328 RH, ’64-72 Chevelle 1" Longer
ALL56320
ALL56106
NEW 1" Longer!
ALL56095
ALL56321
DGDSWURGHQGWR¿WLQWKHVWRFNIUDPHPRXQW VROGVHSDUDWHO\ These lower control arms are intended for racing and will not
ALL56090 6" Aluminum ALL56091 8" Aluminum ALL56092 6" Steel ALL56093 8" Steel
ALL56321 ALL56323 ALL56324
LH, ’64-72 Chevelle RH, ’68-74 Nova LH, ’68-74 Nova
ALL56322
Jam Nuts for Jack Bolts Steel jam nuts for jack bolts Part No.
Related Parts Part No.
Description ALL56322 ’68-72 Chevelle A-arm Spacer Kit, 4-Pieces ALL56325 ’68-74 Nova A-arm Spacer Kit, 5-Pieces ALL56326 Spring Ramp (Helix) Note: Ball joints should be tack welded into lower control arm after assembly. Lower Control Arm Limit Clamps Clamps fasten around tubular lower control arms providing a lower mounting point for a suspension limit chain. Clamps are double-shear style and accept 5/16" hardware. Part No. Description ALL68340 1" ALL68341 1-1/8" ALL68342 1-1/4" Lower Control Arm Kits
ALL99052
ALL56068
ALL56110
Description
ALL56068 ALL56110 ALL99052
1"-8 (Coarse) 1-1/8" Wrench 1"-8 (Coarse) 1-1/2" Wrench 1-1/8"-12 (Fine) 1-3/8" Wrench
Weight Jack Bolt Collars Steel collar typically welds onto frame or chas- sis for installation of a threaded jack bolt. Collar LQFOXGHVJUHDVH¿WWLQJ Part No. Description ALL56099 1"-8 ALL56098 1-1/8"-12 Weight Jack Bolt Sleeves Weld-in mild steel sleeve provides a mounting point for jack bolts or adjustable shock mounts. Sleeves are 2" long and have a 1-3/8" O.D. for welding onto chassis tubing. Part No. Description ALL56109 1"-8, Coarse Thread ALL56073 1-1/8"-12, Fine Thread Weight Jack Plate ALL56112 Heavy-duty steel plate has a threaded boss welded to the center to accept jack bolts with 1"-8 coarse threads. O.D. is 5". Coarse Thread Nut with Sleeve ALL56111 Steel coarse thread nut with sleeve has 1"-8 coarse threads.
Universal kits are 2" longer than standard arms and must be cut to length before welding slug into place. Ball joint sold separately. Part No.
ALL56186
Description
ALL56186 ALL56187
LH Kit, Use with Screw-In Ball Joint (ALL56216) RH Kit, Use with Screw-In Ball Joint (ALL56216)
ALL56073
Double Adjusters Steel double adjusters increase adjustment capability of control arms, trailing arms, Panhard bars, tie rod ends, and other items using threaded tube. Adjuster includes one LH and one RH jam nut. Part No. Description ALL56196 5/8"-18 RH Male/LH Male, 4-1/4" Long ALL56197 3/4"-16 RH Male/LH Male, 5" Long
ALL56198 5/8"-18 RH Male/LH Female, 4" Long ALL56199 5/8"-18 LH Male/RH Female, 4" Long Short GN Strut Bar ALL56190 Fits lower strut arm on strut bar chassis. Bar has 3/4"-16 LH threads (3" long). Hole spacing is 2-1/2".
115
CIRCLE TRACK 2021-22
Made with FlippingBook flipbook maker