SUSPENSION
Aluminum Suspension Tubes Swaged 1-1/8" O.D. tubes are
3/4" Solid Rod End ALL58112 Solid rod ends are built using 1045 steel and are then chrome plated for added wear resistance. End has a body width of 7/8" to match the width of stan- dard rod ends. Bolt Center Caps ALL10678 Caps slip over the head of standard 1/2" bolts to accurately measure the center-to-center length of installed sus- pension tube assemblies. Machined step secures the end of a standard tape mea- Allstar jam nuts have many uses. Great for locking rod ends tightly on suspension tubes or rack and pinion steering units. Package of 4, unless noted. Size Steel Aluminum 1/4"-28 RH ALL18250 — 1/4"-28 LH ALL18251 — 5/16"-24 RH ALL18252 — 5/16"-24 LH ALL18253 — 3/8"-24RH ALL18254 ALL18274 3/8"-24 LH ALL18255 ALL18275 7/16"-20 RH ALL18256 ALL18276 7/16"-20 LH ALL18257 ALL18277 1/2"-20 RH ALL18258 ALL18278 1/2"-20 LH ALL18259 ALL18279 5/8"-18 RH ALL18260 ALL18280 5/8"-18 LH ALL18261 ALL18281 3/4"-16 RH ALL18262 ALL18282 3/4"-16 LH ALL18263 ALL18283 3/4"-10 RH ALL18264 †‡ — 7/8"-9 RH ALL18266 † (Sway Bar Adj. Nut) — 1"-8 RH ALL56110 † (Jack Bolt Nut) — † Sold each. ‡ Commonly used with UBM35-1107, 3/4"-10 jack bolt. Steel Jam Nut Assortments sure for easy reading of the length to the center of the opposite cap. Caps feature a built-in O-ring that allows the cap to swivel on the bolt head and keeps it from falling off. Package of 2. Jam Nuts - Standard Hex
built from .156" wall tubing and have 5/8" RH and LH threads.
5/8" Thread Black Anodized ALL56806-10 ALL56806-11 ALL56806-12 ALL56806-125 ALL56806-13 ALL56806-135 ALL56806-14 ALL56806-145 ALL56806-15 ALL56806-16 ALL56806-17 ALL56806-18 ALL56806-185 ALL56806-19 ALL56806-195 ALL56806-20 ALL56806-205 ALL56806-21 ALL56806-215 ALL56806-22 ALL56806-225 ALL56806-23 ALL56806-235 ALL56806-24 ALL56806-245
5/8" Thread Polished Aluminum ALL56807-10 ALL56807-11 ALL56807-12 ALL56807-125 ALL56807-13 ALL56807-135 ALL56807-14 ALL56807-145 ALL56807-15 ALL56807-16 ALL56807-17 ALL56807-18 ALL56807-185 ALL56807-19 ALL56807-195 ALL56807-20 ALL56807-205 ALL56807-21 ALL56807-215 ALL56807-22 ALL56807-225 ALL56807-23 ALL56807-235 ALL56807-24 ALL56807-245
Length
10" 11" 12"
12-1/2"
13"
13-1/2"
14"
14-1/2"
15" 16" 17" 18"
18-1/2"
19"
19-1/2"
20"
20-1/2"
21"
21-1/2"
22"
22-1/2"
23"
23-1/2"
24"
24-1/2"
Rod Ends Two-piece spherical rod ends have a pivoting steel ball and are sold each. Bore x Thread RH Male
LH Male
RH Female
Strength
Standard Series Steel 1/4" x 1/4"-28
ALL58004
ALL58014 ALL58034 2,835 lbs. ALL58015 ALL58035 4,517 lbs. ALL58016 ALL58036 6,323 lbs. ALL58018 ALL58038 10,046 lbs. ALL58020 ALL58040 15,488 lbs. ALL58022 ALL58042 15,894 lbs. — — 15,894 lbs.
5/16" x 5/16"-24 ALL58005
3/8" x 3/8"-24 1/2" x 1/2"-20 5/8" x 5/8"-18 3/4" x 3/4"-16 3/4" x 3/4"-16 ‡
ALL58006 ALL58008 ALL58010 ALL58012 ALL58013 ‡
Pro Series Steel (Moly) – Black 1/2" x 1/2"-20 ALL58058
ALL58068 ALL58069 ALL58070 ALL58072 ALL58085 ALL58086 ALL58098 ALL58099
— 17,000 lbs. — 19,300 lbs. — 18,000 lbs. — 25,000 lbs. — 17,650 lbs. — 15,200 lbs. — 21,400 lbs.
$VVRUWPHQWVFRQWDLQ¿YH each of 1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20, 5/8"-18, and 3/4"-16. Part No.
1/2" x 5/8"-18 5/8" x 5/8"-18 3/4" x 3/4"-16
ALL58059 ALL58060 ALL58062
Pro Series Steel (Moly) – Black (PTFE Lined) 1/2" x 5/8"-18 ALL58079 ALL58084
Description
ALL18290 ALL18291
35 Asst. RH Jam Nuts 35 Asst. LH Jam Nuts
5/8" x 5/8"-18 3/4" x 3/4"-16
ALL58080 ALL58082 ALL58088 ALL58089
Aluminum – Black 1/2" x 1/2"-20
Jam Nuts - Small Hex Specialty jam nuts have smaller outside diameters, allowing smaller wrenches to be used when changing radius rod lengths.
— 7,700 lbs.
1/2" x 5/8"-18 — 15,000 lbs. ‡ ALL58013 has an oversized hole and is for use with steering shaft tubing. Heavy-Duty 3/4" Chrome Moly Rod Ends
Example: with 1/2" bolts, the same 3/4" wrench can be used to adjust radius rod or mounting hole locations. Package of 4. Thread Size Wrench Size Steel Alum. Black Alum. 5/8"-18 RH 3/4" ALL18292 ALL18296 ALL18286 5/8"-18 LH 3/4" ALL18293 ALL18297 ALL18287 3/4"-16 RH 15/16" ALL18294 ALL18298 ALL18288 3/4"-16 LH 15/16" ALL18295 ALL18299 ALL18289
Heavy-duty or often referred to as “Aircraft Style”, these 4130 chrome moly rod ends have larger bodies, making them 30% stronger than standard 3/4" rod ends. These rod ends are commonly used on Panhard bars and lower strut rods. Length 5/8" Thread Black Anodized ALL99314 RH Male, 3/4" x 3/4"-16 ALL99315 RH Female, 3/4" x 3/4"-16
ALL99314
ALL99315
129
CIRCLE TRACK 2021-22
Made with FlippingBook flipbook maker