SUSPENSION
Aluminum Flat Spacers Flat spacers are great for shimming and adding additional clearance to brackets for brake calipers, power steering, alternators, dry sump pumps or just about anything to help with alignment issues. Package of 2. Thickness 3/8" I.D. (11/16" O.D.) 1/2" I.D. (1" O.D.) 1/8" ALL18740 ALL18760 1/4" ALL18742 ALL18762 3/8" ALL18744 ALL18764 1/2" ALL18746 ALL18766 Tapered Spacers Universal spacers have many uses including spacing rod ends on linkages to prevent binding or just to provide clearance. Spac-
High-Misalignment Reducer Spacers Dual-purpose spacers reduce fastener size mounting
hole and allow the rod end to rotate more than 30° in each direction, which is 25% more than most standard spacers. Stain- less steel spacers resist rust and corrosion. Package of 2. Rod End Size I.D. O.D. “A”
Length “B” Overall Width “C”
Part No.
5/8" 3/4" 3/4"
1/2" 1/2" 5/8"
.750" .890" .890"
.465" .475" .475"
1.68"
ALL18785 ALL18786 ALL18787
1.825" 1.825"
5/8" Rod End Reducer Spacers 5HGXFHUVSDFHUV¿WLQWRURG ends, reducing the hole size for 1/2" hardware while also spacing
HUVSURYLGHD¿QLVKHGORRNZKHQ¿WWLQJERG\SDQHOVRUVSDFLQJ FRPSRQHQWVDZD\IURPÀRRUVDQG¿UHZDOOV3DFNDJHRI I.D. Small O.D. Large O.D. Length Steel Aluminum 1/4" .345 .500 1/4" — ALL18700 1/2" — ALL18702 5/16" .475 .625 1/4" — ALL18706 1/2" — ALL18708
the rod end away from chassis brackets. Standard spacers are
ALL18615
ALL18612
2'DQGÀDQJHGVSDFHUVKDYH2'ÀDQJHVWRKHOS support rod end. Size referenced indicates the amount of space between rod end pivot ball and chassis bracket. Package of 2. Standard Spacers Part No. Description
1/4" 1/2" 1/4" 3/8" 1/2" 3/4" 1"
— ALL18712 — ALL18714 — ALL18716 ALL18570 ALL18590 ALL18572 ALL18592 ALL18574 ALL18594 ALL18576 ALL18596 ALL18578 ALL18595 ALL18571 — ALL18580 ALL18597 ALL18582 ALL18598 ALL18584 ALL18599
3/8"
.525 .680
1/2"
.740 .995
ALL18615 Aluminum, 1/2" ALL18617 Aluminum, 1" ALL18618 Aluminum, 1-1/4" ALL18619 Aluminum, 1-3/4" Flanged Spacers Part No. Description
1"
1-1/2"
1/4" 1/2" 3/4"
5/8"
.825 .995
1"
ALL18586 ALL18585 ALL18587 ALL18588 ALL18589
— — — — —
ALL18611 Aluminum, 1/4" ALL18613 Aluminum, 1/2" ALL18610 Steel, 1/4" ALL18612 Steel, 1/2" Rod End Reducer Bushings Steel bushings reduce the rod end pivot ball I.D. to accept a smaller bolt size. O.D. to I.D. 2-Pack 10-Pack 1/2" to 3/8" ALL18565 ALL18565-10 5/8" to 1/2" ALL18566 ALL18566-10 3/4" to 1/2" ALL18567 ALL18567-10 3/4" to 5/8" ALL18568 ALL18568-10 Shock Spacers
1-1/2"
1/2" 3/4"
3/4"
.950 1.125
1"
Universal Lift Bar HQT/QFKƂGFU ALL68310 Steel lift bar has 5th coil adjust- ments from 26" to 34" in 1" incre-
ments and is raised 2-1/2" for additional center section frame clearance. Accepts 5/8" RH rod ends (not included). QC Lift Bar Brackets
ALL68314
Brackets mount to quick change rearends and ac- cept most popular lift bars. Package of 2. Part No.
Steel spacers have a 1/2" I.D. and 3/4" O.D. and can be used in a variety of other locations. Length 2-Pack 10-Pack
ALL68317
25-Pack
1/4" 1/2" 5/8" 3/4"
ALL64280 ALL64282 ALL64283 ALL64284
ALL64280-10 ALL64282-10 ALL64283-10 ALL64284-10
ALL64280-25 ALL64282-25 ALL64283-25 ALL64284-25
Description
ALL68313 ALL68314 ALL68315 ALL68316 ALL68317 ALL68318
Steel Lowers with 5/8" Mounting Hole Steel Lowers with 5/8" Mounting Hole (3/4" Drop) Steel Lowers with 3/4" Mounting Hole Steel Uppers with 5/8" Mounting Hole Aluminum Uppers with 5/8" Mounting Hole Aluminum Uppers with 3/4" Mounting Hole
Lift Bar Retainer Clamp ALL68325 Bracket clamps around 3" axle tubes to provide a mounting point for a lift bar sup- port rod. 1" wide bracket has angled tabs with 1/2" holes for mounting a strut rod with 1/2" rod ends.
MIKE ROOT
JSK IMAGES
Top View
130
CIRCLE TRACK 2021-22
Made with FlippingBook flipbook maker