SUSPENSION
Weld-On Trailing Arm Brackets Weld lower rear mount brackets to 3" axle tube to mount coil- overs and trailing arms. Brackets are 1/4" thick steel with 1/2" shock hole. Available with either 3/4" trailing arm holes or a 2" long slot.
Coil-Over Load Bolt Assembly ALL56074 Threaded aluminum bolt is 6" long with ¿QHWKUHDGVDQGLVFRPPRQO\XVHG as an adjustable travel limiter. Also used with ALL56098 threaded sleeve. Part No. Description ALL56075 Shock End Suspension Limiter Single-bushing suspension limiter is common- ly used on the chassis LR or RR to limit travel during acceleration “hike up” and control roll steer. Dual-bushing limiter is often used on the lift bar to control lift bar travel on deceleration. Bushing design reduces or absorbs shock when suspension is limited and helps reduce tire unloading. Top plate is drilled to attach a 1/2" rod end when used in a shock mount or for attaching to a weight jack bolt with 7/16"-20 internal threads using optional chrome moly stud ALL64304. Clevis has a 3/8" hole for simple attachment to a chain or cable. Part No. Description ALL64300 Single Bushing Limiter ALL64302 Dual Bushing Limiter ALL64304 Chrome Moly Stud with Jam Nut Limiter Chain Kit Commonly used to limit rear suspen- sion or lift bar travel. Chain can be eas- ily cut to required length. Shrink sleeve installs over chain, and when heated with a heat gun, shrinks to keep chain in position and prevent chain from binding or catching on itself. Part No. Description ALL64312 5/16" Diameter Accepts 1/2" Pin or Bolt QC Axle Tube Support Brackets Brackets provide mounting points 3/16" Diameter Accepts 3/8" Pin or Bolt ALL64314
ALL60126 Bracket with two trailing arm holes.
ALL60128 Bracket with 2" slot.
Weld-On Trailing Arm/ Shock Brackets Flame-cut 1/2" thick steel brackets weld to 3" diameter axle tube, providing mounting
points for trailing arm and shock. Brackets have two 3/4"-10 threaded holes to
mount trailing arm and a 1/2" diameter hole with spacer for mounting a shock. Part No. Description ALL60110 LH Bracket ALL60111 RH Bracket Clamp-On Trailing Arm Brackets Steel brackets clamp on 3" axle tube for attachment of coil-over
ALL60110
for a strut rod assembly to help HOLPLQDWHÀH[IRXQGLQTXLFN change rear ends. ALL68320 attaches to the side bell bolts on most quick-change rear ends. ALL68322 has tabs with 1/2" holes and mounts directly onto a 3" axle tube. Part No. Description
shocks and trailing arms. Available with two 3/4" holes or a 2" slot. Grade 5 hard- ware and Nyloc nuts included. Part No.
ALL68320
ALL68322
Description ALL60134 Bracket with Two 3/4" Holes ALL60135 Bracket with 2" Slot Clamp-On Trailing Arm Bracket ALL60136 Universal bracket
ALL68320 Center Section Mount ALL68322 Axle Tube Mount
ALL68320 ALL68322
mounts coil-over elimi- nator and shock next to axle and mounts trailing arm 4-1/2" below axle centerline, either inside or outside of bracket. Allows Limited Late Models and 0RGL¿HGVWREHFKDQJHG from coil-over to coil-over elimi- nator and shock. Grade 5 hardware and Nyloc nuts included.
RICH SEGVICH
132
CIRCLE TRACK 2021-22
Made with FlippingBook flipbook maker