TOOLS & PIT EQUIPMENT
NPT Taps Alloy steel taps work well for chasing and cleaning threads EHIRUHLQVWDOOLQJ¿WWLQJVDQGSOXJV Part No. Description
Spindle Checker Tools Assure correct alignment of the upper and lower ball joint when checking for bent spindles. Insert slugs into spindle DQGJXLGHURGZLOO¿WWKURXJKVOXJVLI VSLQGOHLVQ¶WEHQW.LWV¿WPRVW aftermarket race and GM stock Metric spindles. Part No. Description ALL11176 Kit with GM Lower, 2" Taper ALL11177 Kit with Chrysler Lower, 1-1/2" Taper ALL11184 Kit for GM Metric, 2" Taper Related Parts Part No. Description ALL99140 GM Lower Slug with Nut (2" Per Ft.) ALL99141 Chrysler Lower Slug with Nut (1-1/2" Per Ft.) ALL99158 GM Metric Lower Slug with Nut (2" Per Ft.) ALL99142 Upper Slug with Nut (1-1/2" Per Ft.) ALL99159 GM Metric Upper Slug with Nut (2" Per Ft.) ALL99143 Replacement Guide Rod Taper Reamers Repair or enlarge tapered holes to accept tie rod ends or ball joints. Reamers may be used in a drill with a 1/2" chuck by removing the T-handle. Part No. Description ALL11170 Reamer, 7.15°, 1-1/2" Taper Per Ft. ALL11172 Reamer, 9.56°, 2" Taper Per Ft. Taper Reamer Specifications for Ball Joints Part No. Taper Specs ALL56204 1-1/2" Per Ft. ALL56206 2" Per Ft. ALL56208 2" Per Ft. ALL56210 1-1/2" Per Ft. ALL56212 2" Per Ft. ALL56214 1-1/2" Per Ft. ALL56216 1-1/2" Per Ft. Ball Joint Spreader Tool ALL11174 Tool separates ball joint from the spindle. Inside of cyl- LQGHULVVKDSHGWR¿WRYHUWDSHUHGVWXGRIPRVWEDOOMRLQWV and presses against stud of other ball joint. Not for use on FWD or 4WD applications. Tool is 4" tall fully collapsed and 6" tall fully extended. Related Part Part No. Description ALL11175 1" Extensions (Set of two) Taps Tungsten steel taps are titanium coated. Economy taps are available in right-hand and left-hand threads. Part No. Description Part No. Taper Specs ALL56217 1-1/2" Per Ft. ALL56218 2" Per Ft. ALL56220 2" Per Ft. ALL56280 1-1/2" Per Ft. ALL56284 1-1/2" Per Ft. ALL56286 1-1/2" Per Ft.
ALL11056 1/8"-27NPT ALL11057 1/4"-18NPT ALL11058 3/8"-18NPT ALL11059 1/2"-14NPT Thread Files Remove burrs from damaged or
rusted external threads on bolts, spindles, axle tubes, threaded VKDIWSLSHDQGSLSH¿WWLQJV&KRRVHIURPWKUHHGLIIHUHQW¿OHV each 8-1/2" long. Standard and metric sizes. Part No. Description ALL11037 11-12, 13-14, 16-18, 20-24TPI ALL11038 9-10, 12-16, 20-27, 28-32TPI ALL11039 .80-1.00, 1.25-1.50, 1.75-2.00, 2.50-3.00mm Flap Wheel Sanding Discs Flap discs for 4-1/2" grinders coatings from a variety of metal, stainless, and steel surfaces. Ideal for grinding welds or preparing materials for welding. Sold each. Part No. Description ALL12121 60 Grit ALL12122 80 Grit ALL12123 120 Grit Twist-Lock Backing Pad ALL12100 Twist-lock backing pad accepts 2" with a 7/8" arbor quickly remove rust and other
twist-lock style cleaning or sanding discs and fea- tures a 1/4" arbor to work with most drills or 90° die grinders. Pad is rated up to 30,000 rpm. Twist-Lock Sanding Discs
2" O.D. sanding discs are great for sanding a variety of parts and surfaces. Use with ALL12100 twist-lock backing pad (sold separately). Package of 10. Part No. Description ALL12105 60 Grit ALL12106 80 Grit ALL12107 120 Grit Twist-Lock Cleaning Discs 2" O.D. twist-lock discs are great for cleaning gasket material or paint from parts and surfaces. Use with ALL12100 twist-lock backing pad (sold separately). Package of 5. Part No. Description ALL12101 Coarse ALL12102 Medium ALL12103 Fine
ALL11060 1/4"-20 RH ALL11061 1/4"-28 RH ALL11062 3/8"-16 RH ALL11063 3/8"-24 RH ALL11064 1/2"-20 RH ALL11065 1/2"-20 LH ALL11066 5/8"-18 RH ALL11067 5/8"-18 LH ALL11068 3/4"-16 RH ALL11069 3/4"-16 LH
139
CIRCLE TRACK 2021-22
Made with FlippingBook flipbook maker