COOLING
Late Model Radiator ALL30044 Aluminum dual-pass radiator has 16"x28" overall dimen-
Radiator Shaker Screen ALL30160 Commonly used on Dirt Late Mod- els, universal shaker screen is
mounted in front of the radiator on most dirt cars. Unit includes black powder coated aluminum frame, screen, 1/2" x 32" cross rod, springs and retaining clips. Frame dimen- sions are 17" tall and 25" wide. Stainless Wire Screen
VLRQVDQGGRHVQRWKDYHD¿OOHU neck. The 1-3/4" bottom outlet is welded 90° to the tank, not angled, as these radiators typically mount with the top leaned forward. Universal
top inlet design accepts 1-1/2" standard hose, 1-3/4" hose, -16 or DQ¿WWLQJV VROGVHSDUDWHO\ ,QFOXGHVDSHWFRFNORFDWHG near the top on the driver’s side to release possible air in the V\VWHPZKHQ¿OOLQJ Wall Mount Radiator Holder Kit ALL12216
1/8" Use screen to protect radiators, oil coolers, or other items. Size referenced is the approxi- mate opening of the screen. Part No. Description 5/64" (.025" Wire Diameter) ALL22260 12" x 36" ALL22262 36" x 36" 1/8" (.035" Wire Diameter) ALL22265 12" x 36" ALL22267 36" x 36" ALL22268 36" x 48" 3/16" (.047" Wire Diameter) ALL22270 12" x 36" ALL22272 36" x 36" ALL22273 36" x 48" Radiator Caps
5/64"
Brackets fasten to trailer wall and hold radiator safely in place to avoid damage during transport. Kit includes two 29" long aluminum brackets with adjustment holes at 2" increments and DUPVWR¿WUDGLDWRUFRUHVXSWR
3/16"
wide. Adjustable arms are slotted for quick adjust- PHQWZLWKLQFOXGHGWKXPEVFUHZNQREVWR¿WDYDULHW\ of radiator heights. Radiator Fin Tool Kit ALL10680 Hand-held tool straightens DQGUHSDLUVGDPDJHG¿QV in most radiators, coolers, and air conditioning con- densers. Repairing GDPDJHG¿QVSURYLGHVEHWWHUDLUÀRZ through core, increasing cooling ability. Six to 2-1/2" thick) to keep radiator secured in saddle-style lower mounts. Steel bracket is .085" thick and has a 3/16" hole for riveting or bolting in place. Radiator Honeycomb ALL30158 1/2" thick honeycomb screen mounts to front of radiator to protect from rocks and debris. Secure directly to radiator using ALL30085 mounting kit, sold separately. 19" x 26". Universal Mounting Kit ALL30085 Mounting kits are commonly used to mount electric fans, oil coolers, transmission coolers, or honeycomb screen directly to a radiator. Kits include four 8" nylon mounting bolts with washers, rubber spac- er blocks, and retaining nuts. Bolts are pressed WKURXJKWKH¿QVRIWKHUDGLDWRUWRPRXQWDFFHVVRU\ LQWHUFKDQJHDEOHKHDGVLQDQG¿QVSHULQFK Upper Radiator Support Bracket ALL30120 Universal upper support bracket is preformed WR¿WRYHUWKHWRSRIPRVWUDGLDWRUFRUHV XS
ALL30128
ALL30129
ALL30136
Higher cooling system pressure raises the boiling point of FRRODQWWRUHGXFHWKHULVNRIRYHUKHDWLQJ6WDQGDUGVL]HFDSV¿W 2-1/8" O.D. x 3/4" deep necks unless otherwise noted. Recovery system caps allow coolant to exit the cooling system into an RYHUÀRZRUUHFRYHU\ERWWOHDVFRRODQWKHDWVDQGH[SDQGV$V the system cools, recovery system caps will draw coolant back in to keep the cooling system full. Non-recovery system caps allow coolant to exit the system, but do not draw coolant back into the system. Part No. Description Pressure *Non-Recovery Radiator Caps ALL30134 Stant/Moto Rad Round 18-22 PSI ALL30135 Stant/Moto Rad Round 21-25 PSI ALL30128 Stant/Moto Rad Round 28-32 PSI *Recovery System Radiator Caps ALL30132 Stant/Moto Rad Round 16 PSI ALL30133 Stant/Moto Rad Round with Lever 16 PSI ALL30130 Stant/Moto Rad Round with Lever 18-22 PSI ALL30137 Stant Octagon 21-25 PSI ALL30131 Stant/Moto Rad Round with Lever 21-25 PSI ALL30136 Round 22-24 PSI ALL30129 Round 29-31 PSI ALL30138 Stant Octagon 38-42 PSI *Small Diameter Recovery System Radiator Caps ALL30124 Stant/Moto Rad (32mm I.D., 16mm deep) 16 PSI ALL30125 Stant/Moto Rad (32mm I.D., 16mm deep) 19-21 PSI ALL30126 Stant/Moto Rad 32mm I.D., 16mm deep) 28-32 PSI *Warning: High-pressure radiator caps are made for use on race vehicles only. Do not use these caps on passenger vehicles with stock-type radiators. It is recommended to pressure test the complete cooling system to the max- imum level of pressure indicated on the cap. Failure to test cooling system to the proper pressure prior to installing the cap may result in damage to the cooling system and/or bodily injury.
38
CIRCLE TRACK 2021-22
Made with FlippingBook flipbook maker