Small 5X5 Hub Kits The standard hubs for short track racing, they minimize heat transfer from the rotor to the bearings. Aluminum hubs are rec- ommended anywhere they are allowed, except for the right front on cars weighing over 3,000 lbs. Hub kits are available in several versions.
Strut Spindles 'HVLJQHGIRUFDUVZLWKD6HULHVIURQW
clip, spindles are manufactured to utilize different degree spin- GOHLQVHUWVIRUXSSHUWDSHU6SLQGOHVRIIHUGURSDQG KHLJKWDQGDUHHQJLQHHUHGIRUXVHZLWKZLGHKXEV diameter x 1.25" thick rotors, and four-piston, rear position brake calipers. Spindle inserts must be purchased separately. Part No. Description HOW34712 Right Spindle, Threaded Steering Arm HOW34712L4A Left Spindle, Adjustable Steering Arm Spindle Inserts HOW347DET00 0° Spindle Insert HOW347DET02 +/-2° Spindle Insert Spindle Taper Machine Reamers ,GHDOZKHQVSLQGOHVPXVWEHHQODUJHG heavy-duty reamers are engineered for use in a drill or other machine. Left-helical right-cutting reamers are offered in 1.5" or 2.0" per foot tapers. Part No. Description HOW84015 Spindle Reamer, 1.5" Per Ft. Taper HOW84020 Spindle Reamer, 2.0" Per Ft. Taper Upper A-Frame Mounts 0RXQWVZHOGWRFKDVVLV&KRRVHIURPPRXQW - LQJEORFNRUWRZHUVW\OH0RXQWLQJEORFNHOLPL - nates the use of shims on upper control arms; simply loosen jam nut and turn adjuster screw to change caster and camber. Tower mount is slotted and inset, allowing different position keys to simplify upper A-frame adjustment. All mounts are sold each. Part No. Description HOW22605 Upper A-Frame Tower Mount, Standard HOW22688 Upper A-Frame Mounting Block HOW2286 Hardware for HOW22688 HOW22615 Upper A-Frame Tower Mount, 1” Taller Than HOW22605, Double Slotted for Key Set NEW! HOW22616 Upper A-Frame Tower Mount, 1" Taller Than HOW22605, Slotted for Key Set NEW! Precision Lower A-Frame Bushings
Small 5x5 Hub Kits Less Dust Cover Hubs are offered separately with races and coarse-thread studs only, or in kit form complete with wheel bearings, grease seal, spindle nut, lug nuts, rotor fasteners, and nec- HVVDU\KDUGZDUH'XVWFRYHU127LQFOXGHG Offered in 8-bolt versions only.
Hub Only Part No.
Hub and Kit Part No.
Description
Aluminum 5x5 Hub Kit
HOW36558 HOW36568
HOW205100 HOW205300
Steel 5x5 Hub Kit
Small 5X5 Hub Kits with Dust Cover Complete kits include hub, wheel bearings, races, grease seal, spindle nut, coarse-thread drive studs, lug nuts, rotor fasteners, dust cover, and necessary hardware.
Front Hub Kit Part No. HOW205198 HOW205118
Rear Hub Kit Part No.
Description
Aluminum 5x5 Hub Kit
HOW205298
Steel 5x5 Hub Kit HOW205218 Note: Aluminum 5x5 hubs should not be used on the right front on asphalt tracks with more than 25° of banking. Steel hubs should be used.
Small 5x5 and 5x4.75" Hub Components Part No.
Description
HOW20539 HOW20540 HOW20550 HOW20551 HOW21250 HOW21255 HOW205495 HOW205496
Aluminum Front Dust Cover
Countersunk Screw for Dust Cover
Gasket for 5 x 5 Hubs
Rear Drive Flange Screw, 5 x 5
Snap Ring
Hub Seal, All Except Magnesium W5 Rear Drive Flange O-Ring, 5 x 5
Howe bushings eliminate the bind commonly DVVRFLDWHGZLWK2(0UXEEHUXQLWVSURYLGLQJ reduced friction and increased durability. One- piece bearings are easy to install and may be lubricated without disassembly. Offered for pop-
Rear Drive Flange, 5x5 Steel with Aluminum Cap
Cast Spindles ,GHDOZKHQFODVVUXOHVSURKLELWWXEXODUVWHHO VSLQGOHV5LJLGVWHHOVSLQGOHVLQFOXGH a tapered hole for tie rod ends, but may be
ular lower A-frames, bushings are sold in pairs. Specially-chan- neled grease bolts, sold each, may be purchased separately to further reduce friction.
Bushings Part No.
Bolt Part No.
drilled for use with 5/8" heims. Accepts +RZHFDOLSHUEUDFNHWV +2: /RU +2: 5 DQG &KHY\&RU ,PSDODKXEV Part No.
Application
1970-81 Camaro/Firebird Ford on Impala Frame
HOW22915 HOW2294 HOW22920 HOW2294
1966-72 GM “A” Body/1965-70 Catalina/ 1969-72 Grand Prix, Small Round and Oval Bushings HOW22900 HOW2296 1967-72 GM “A” Body/1968-74 Nova/
Description
HOW344GN HOW344GNL
Right Spindle Left Spindle
1967-70 Camaro/1967-69 Firebird/1970-72 Monte Carlo, Small Round and Large Round Bushings 1978-87 GM “A”/”G” Body, Metric Chassis
HOW22901 HOW2296
Lower Control Arm/3rd Ball Joint NEW! Tubular steel, strut-style control arm is 15.60" long and accepts a screw-in style lower ball joint. Part No.
HOW22925
*
1983-94 Ford Crown Vic/Grand Marquis
HOW22930 HOW2295
Howe Modified
HOW22924
—
Part No.
Description
Replacement Component HOW56001004
Replacement Outer Sleeve for HOW22915 NEW! Notes: 1967-72 GM “A” body (Chevelle/Skylark/Cutlass/Lemans) used two different style lower A-frames. One model used small round and oval bush- ings, while another used small round and large round bushings. Inspect A-frames for specific requirements prior to ordering. * Use HOW2294 for front, HOW2295 for rear.
Description
HOW229615 HOW229625
Lower Control Arm, 15.60” Long
Lower Control Arm, 15.60” Long, w/Heim End
428
CIRCLE TRACK 2021-22
Made with FlippingBook flipbook maker