2021-22 Circle Track Catalog

Spring Covers NEW! Designed to not only prevent dirt and debris from contaminating costly shock components but also HIIHFWLYHLQNHHSLQJVKRFNVSULQJVHWXSFRQ¿GHQWLDO)DEULFFRYHUVDUHEUHDWKDEOHZDWHUUHSHOOHQW and heat resistant up to 450°F, while also being washable for multiple use. Part No. Description HYP1101-12B 2-1/2" I.D. x 12" FL "B" Series Springs HYP1101-12BUHT 2-1/2" I.D. x 12" FL "B" Series UHT Springs HYP1101-14B 2-1/2" I.D. x 14" FL "B" Series Springs HYP1101-14BUHT 2-1/2" I.D. x 14" FL "B" Series UHT Springs HYP1101-16B 2-1/2" I.D. x 16" FL "B" Series Springs Part No. Description HYP1101-16E HYP1101-18E HYP1101-20G HYP1101-22G

3.0" I.D. x 16" FL "E" Series Springs 3.0" I.D. x 18" FL "E" Series Springs 3.75" I.D. x 20" FL "G" Series Springs

3.75" I.D. x 22" FL "G" Series Springs HYP1101-7PB 5.00" I.D. Linear/Progressive Pull Bar Springs

Hylosil RTV silicone sealants may be used to seal engines, transmissions, and differentials. Product may be used to replace traditional JDVNHWVDQGUHPDLQVSHUPDQHQWO\ÀH[LEOH 5HVLVWDQWWRDXWRPRWLYHÀXLGVH[FHSWIXHOV Sold in 3.0-oz. tubes. Part No. Description HYL61405 Gray Silicone RTV Sealant HYL61411 Hi-Temp Silicone RTV Sealant HYL61413 Black Silicone RTV Sealant Hylogrip Thread Sealant Specially formulated to seal and lock WKUHDGHGMRLQWV+<LQFOXGHVWKH addition of PTFE, which considerably reduces the tightening of threaded joints. Sold in .34 or 1.69-oz. bottles.

Hylomar M Blue The original Hylomar. Non-setting gasket and jointing compound is used by OEM’s from around the world. Resistant to lubricants and fuels, product features a wide operating tem- perature range of -58 to 482°F. Part No. Description HYL61306 Hylomar M Blue, 8.45-oz. Brush-Top Can HYL61311 Hylomar M Blue, 6.76-oz. Aerosol Can HYL61314 Hylomar M Blue, 1.35-oz. Tube Hylomar Cleaner HYL61701 Product removes Hylomar gasket and jointing compound, reducing precious clean-up and rebuild time. Sold in 13.53-oz. aerosol can.

.34-oz. Bottle

1.69-oz. Bottle

Description

HYL2413 Thread Locker HYL2170 Thread Locker

HYL61802 HYL61807

HYL61803 HYL61808

HYL5172 Thread Locker with PTFE

— HYL61818

Premium Forged Series Pistons Forged 2618 alloy pistons have dual forced pin oiling, deep valve relief pockets, and accept 1/16" top, 1/16" second, and 3/16" oil rings. Lateral gas porting on selected pistons further increases performance. Sets of eight include wrist pins and spiral locks.

NEW VENDOR!

FHR Series Pistons Affordable, durable Forged Head Relief (FHR) 4032 alloy street/strip pistons accept 5/64" top, 5/64" second, and 3/16" oil rings. Sets of eight include wrist pins and Tru-Arc lock rings.

Rod Length

Comp. Ratio

Head Volume

Part No.

Description Bore

Stroke

Small Block Chevrolet 283-400 ICNIC754.030 Step Dish 4.155" 3.750" 5.700" 10.6:1 15.2cc ICNIC792.030 Flat Top 4.030" 3.250" 5.700" 9.8:1 -4.9cc ICNIC792.040 Flap Top 4.040" 3.250" 5.700" 9.8:1 -4.9cc ICNIC793.040 Dome 4.040" 3.250" 5.700" 11.2:1 6.3cc Small Block Ford 289-351W ICNIC736.030 Dome 4.030" 2.870" 5.155" 11.1:1 6.8cc

Rod Length

Comp. Ratio

Head Volume

Part No.

Description Bore Stroke

Small Block Chevrolet 283-400 ICNIC9913.030 Flat Top 4.030" 3.480" 5.700" 10.2:1 -6.4cc ICNIC9913.040 Flat Top 4.040" 3.480" 5.700" 10.2:1 -6.4cc ICNIC9933.030 Dome 4.030" 3.480" 5.700" 12.0:1 6cc ICNIC9941.030 Flat Top 4.155" 3.750" 5.700" 11.9:1 -3.7cc

Part No.

Description

Part No.

Description

Replacement Round Blades

Replacement Heads

IHKBL01 IHKBL02 IHKBL03 IHKBL04 IHKBL05 IHKBL06 IHKBL08 IHKBL10 IHKBL12

#1 Blades (12) #2 Blades (12) #3 Blades (12) #4 Blades (12) #5 Blades (12) #6 Blades (12) #8 Blades (12) #10 Blades (12) #12 Blades (12)

IHKHD01 IHKHD02 IHKHD03 IHKHD04 IHKHD05 IHKHD06 IHKHD08 IHKHD10 IHKHD12

#1 Head .053" Wide #2 Head .090" Wide #3 Head .150" Wide #4 Head .215" Wide #5 Head .290" Wide #6 Head .375" Wide #8 Head .500" Wide #10 Head .625" Wide #12 Head .750" Wide

Tire Grooving Iron IHK125 Lightweight pistol grip stays cool during use. The solid brass head keeps the heat “just ahead” of the cutting blade to quickly groove dirt track tires. Cut depth is controlled by the adjustable blade. Iron has a 250-watt capacity, and includes .215" wide EUDVVKHDGWZHOYHEODGHVDQGIRRWSRZHUFRUG

441

CIRCLE TRACK 2021-22

Made with FlippingBook flipbook maker