Dry Sump Replacement Parts Item No. Part No. Description Studs 3 SCP1067-4 Fits Pumps SCP-204/204-A (7.825" Long) Fittings 4 SCP1114-1 -10 Port/-12 4 SCP1202-10 -10 Port/-10 4 SCP1210-10 -12 Port/-10 4 SCP1212-12 -12 Port/-12 4 SCP1216-16 -12 Port/-16 Gears 5 SCP1045 Idler 1.450" 5 SCP1045K Drive 1.450" 5 SCP1055 Idler 1.200" 5 SCP1055K Drive 1.200" Gear Bodies 6 SCP1047 1.450"-12 In and Out 6 SCP1057 1.200"-10 In and Out 6 SCP1057-12 1.200"-10 In and Out 6 SCP1075 1.200", 45°, -10 In and Out 6 SCP1076 1.450" 45° -12 In and Out 8 SCP1058 Mount Plate 3-Stage Misc. Components 12 SCP1064 Adjusting Screw and Nut 13 SCP1065 Poppet — SCP1051 Mount Plate, Bert/Brinn, New Style
Dry Sump Oil Pumps
16
15
20
4
3
23
24
20 2 3
1
SCP pump bodies are machined from 7075-T6 aluminum, then anodized. Pumps incorporate O-ring bodies for quick and easy assembly. All pumps are hand assembled and dyno tested for SUHVVXUHDQGÀRZYROXPH3XPSLQFOXGHVDOO¿WWLQJVDQGSOXJV Part No. Description 3-Stage Dry Sump Pumps - Engine Mount SCPSCP-201A SB Chevrolet, (2) 1.200" Wide Scavenge Stages and (1) 1.450" Wide Pressure Stage SCPSCP-201B SB Chevrolet, (3) 1.450" Wide Stages 4-Stage Dry Sump Pump - Engine Mount SCPSCP-204A SB Chevrolet, (3) 1.200" Wide Scavenge Stages and (1) 1.450" Wide Pressure Stage 4-Stage Dry Sump Pumps - Bert/Brinn Mount
21 13 16
19
5
6
14
Bert/Brinn, with Rear Mount Adapter for KSE TandemX Pump, (3) 1.200" Wide Scavenge Stages and (1) 1.450" Wide Pressure Stage
17 18
SCPBT204AWKSE
6
Mount Plate, Bert/Brinn, Includes Kidney Port, New Style
17 5
— SCP1051-5
SCPBT214 Bert/Brinn, (3) 1.450" Wide Scavenge Stages, and (1) 1.450" Wide Pressure Stage Notes: If you have an engine mount dry sump pump and want a Bert/Brinn mount pump, you must purchase the following mounting plates: 3-Stage Dry Sump Pump - (1) set of SCP1051 4-Stage Dry Sump Pump - (1) set of SCP1051 and (1) set of SCP1051-5 Gilmer Pulleys Made from hard-anodized 7075-T6 aluminum. Part No. Description SCP1104-28 28-Tooth Pump Pulley
8
—
SCP38-24 3/8" Internal Hex Drive Screw, 3/8"-24 Thread, Each NEW !
5
15 SCP1071 Key 3/16" Square (Ground) 17 SCP1215-4* Front Seal and Small Parts Kit 19 SCP1289 Riser Plate S.B.C. 20 SCP1428-T Nut 1/4"-28 Allen 21 SCP1472 Spring, High-Pressure 21 SCP1473 Spring, Medium-Pressure 22 SCPS5K Bearing Back Body (2 Req’d.) 23 SCPS7K Bearing Front Body (2 Req’d.) 24 SCP6373 Front Seal (All Pumps) * Kit includes all O-rings, Allen screws, 4-#404 Woodruff keys, Tru-Arc ring, and front seal. Drive Kit SCPD-290 Drive kit uses V-groove belts for water pump and accessories, and a cog- style belt to run dry sump pump. Kit includes a keyed mandrel, mandrel bolt, V-groove pulley halves (2 pair), .500" spacer, 16-tooth cog pulley, and a hat washer.
6
9
5
6
12
7
22
Gilmer Belts Part No
Description SCP225L100 22-1/2" Length Belt SCP240L100 24" Length Belt SCP255L100 25-1/2" Length Belt
Pump Mount SCP1289 Small block Chevy aluminum pump mount riser plate has two positions and raises pump either one or two inches.
733
CIRCLE TRACK 2021-22
Made with FlippingBook flipbook maker