JOURNAL OF NATURAL FIBERS
21
Disclosure statement No potential conflict of interest was reported by the author(s).
Funding This research is supported by Universiti Malaya Research Excellence Grant 2025 [UMREG002-2025].
Availability of data and materials The availability of data and materials are upon request
Ethics approval and consent to participate Compliance with ethical standards
References Abdalla, M. M., C. Ying Kei Lung, P. Neelakantan, and J. Pekka Matinlinna. 2020. “A Novel, Doped Calcium Silicate Bioceramic Synthesized by Sol–Gel Method: Investigation of Setting Time and Biological Properties.” Journal of Biomedical Materials Research Part B: Applied Biomaterials 108 (1): 56–66. Abdelatif, Y., A.-A. M. Gaber, A. E.-A. S. Fouda, and T. Elsokkary. 2024. “Sustainable Utilization of Calcined Sugarcane Mud Waste as Nanofiller for Fine Paper Production.” Biomass Conversion and Biorefinery 14 (7): 8947–8956. Adjimi, S., J.-C. Roux, N. Sergent, F. Delpech, P.-X. Thivel, and M. Pera-Titus. 2014. “Photocatalytic Oxidation of Ethanol Using Paper-Based Nano-TiO2 Immobilized on Porous Silica: A Modelling Study.” Chemical Engineering Journal 251:381–391. https://doi.org/10.1016/j.cej.2014.04.013. Agrawal, A., and K. Singha. 2024. “Modern Developments in Dyeing and Printing Using Nanotechnology.” In Nanotechnology in Textile Finishing: Advancements and Applications , edited by B. S. Satyaranjan, S. Ahmed and A. Wazed, 97–122. Springer. Atmakuri, A., A. Palevicius, A. Vilkauskas, and G. Janusas. 2020. “Review of Hybrid Fiber Based Composites with Nano Particles—Material Properties and Applications.” Polymers 12 (9): 2088. Azizi-Lalabadi, M., A. Ehsani, B. Divband, and M. Alizadeh-Sani. 2019. “Antimicrobial Activity of Titanium Dioxide and Zinc Oxide Nanoparticles Supported in 4A Zeolite and Evaluation the Morphological Characteristic.” Scientific Reports 9 (1): 17439. https://doi.org/10.1038/s41598-019-54025-0. Bajpai, P. 2018. Biermann’s Handbook of Pulp and Paper: Volume 1: Raw Material and Pulp Making . Elsevier. Baki, M. H., F. Shemirani, R. Khani, and M. Bayat. 2014. “Applicability of Diclofenac–Montmorillonite as a Selective Sorbent for Adsorption of Palladium(II); Kinetic and Thermodynamic Studies.” Analytical Methods 6 (6). https:// doi.org/10.1039/c3ay41782d. Bhat, R., A. Kumar Nadda, T. Anh Nguyen, and S. Sharma. 2022. “Nanotechnology in Paper and Wood Engineering: Fundamentals, Challenges and Applications.” Börjesson, M., and G. Westman. 2015. “Crystalline Nanocellulose—Preparation, Modification, and Properties.” Cellulose-Fundamental Aspects and Current Trends : 7. Borodulina, S., H. Reza Motamedian, and A. Kulachenko. 2018. “Effect of Fiber and Bond Strength Variations on the Tensile Stiffness and Strength of Fiber Networks.” International Journal of Solids and Structures 154:19–32. https:// doi.org/10.1016/j.ijsolstr.2016.12.013. Bown, R. 1998. “Particle Size, Shape and Structure of Paper Fillers and Their Effect on Paper Properties.” Brayner, R., R. Ferrari-Iliou, N. Brivois, S. Djediat, M. F. Benedetti, and F. Fiévet. 2006. “Toxicological Impact Studies Based on Escherichia Coli Bacteria in Ultra ZnO Nanoparticles Colloidal Medium.” Nano Letters 6 (4): 866–870. https://doi.org/10.1021/nl052326h. Cazan, C., A. Enesca, and L. Andronic. 2021. “Synergic Effect of TiO2 Filler on the Mechanical Properties of Polymer Nanocomposites.” Polymers 13 (12): 2017. Chauhan, V. S., and S. K. Chakrabarti. 2012. “Use of Nanotechnology for High Performance Cellulosic and Papermaking Products.” Cellulose Chemistry and Technology 46 (5): 389. Chen, H., B. Wang, J. Li, G. Ying, and K. Chen. 2022. “High-Strength and Super-Hydrophobic Multilayered Paper Based on Nano-Silica Coating and Micro-Fibrillated Cellulose.” Carbohydrate Polymers 288:119371. https://doi.org/ 10.1016/j.carbpol.2022.119371. Chung, H., and N. R. Washburn. 2016. “2 - Extraction and Types of Lignin.” In Lignin in Polymer Composites , edited by OMAR. Faruk and MOHINI. Sain, 13–25. William Andrew Publishing.
Made with FlippingBook interactive PDF creator