JOURNAL OF NATURAL FIBERS
25
Samanmali, V. G. C., A. R. M. A. M. Rathnayake, T. B. Nishan Dharmaweera, R. T. De Silva, and M. M. M. G. P. G. Mantilaka. 2025. “Optimizing Dual Hierarchical Textured Superhydrophobic Paper for Enhanced Writing and Printing Performance: Balancing Water Resistance and Ink Adhesion.” RSC Advances 15 (39): 32721–32731. Samyn, P., A. Barhoum, T. Öhlund, and A. Dufresne. 2018. “Nanoparticles and Nanostructured Materials in Papermaking.” Journal of Materials Science 53 (1): 146–184. Sani, M. R., A. R. Y. S. Mochamad Titus Maulana, S. Muljani, and D. Hery Astuti. 2022. “Synthesis and Modification of Nano-Precipitated Calcium Carbonate (PCC) with Addition of Ethylene Glycol.” International Journal of Eco- Innovation in Science and Engineering 3 (2): 1–6. https://doi.org/10.33005/ijeise.v3i02.55. Senadeera, G. K., T. Kitamura, Y. Wada, and S. Yanagida. 2006. “Enhanced Photoresponses of Polypyrrole on Surface Modified TiO2 with Self-Assembled Monolayers.” Journal of Photochemistry and Photobiology A: Chemistry 184 (1–2): 234–239. Shah, M. A., D.-G. Lee, B.-Y. Lee, and S. Hur. 2021. “Classifications and Applications of Inkjet Printing Technology: A Review.” IEEE Access 9:140079–140102. https://doi.org/10.1109/ACCESS.2021.3119219. Shak, K. P., Y. L. Pang, and S. K. Mah. 2018. “Nanocellulose: Recent Advances and Its Prospects in Environmental Remediation.” Beilstein Journal of Nanotechnology 9:2479–2498. https://doi.org/10.3762/bjnano.9.232. Shankar, S., S. Kasapis, and J. W. Rhim. 2018. “Alginate-Based Nanocomposite Films Reinforced With Halloysite Nanotubes Functionalized by Alkali Treatment and Zinc Oxide Nanoparticles.” International Journal of Biological Macromolecules 118 (Pt B): 1824–1832. https://doi.org/10.1016/j.ijbiomac.2018.07.026. Shen, J., Z. Song, X. Qian, F. Yang, and F. Kong. 2010. “Nanofillers for Papermaking Wet End Applications.” BioResources 5 (3): 1328–1331. Shionoya, S., W. M. Yen, and H. Yamamoto. 2018. Phosphor Handbook . CRC press. Singh, S. P., and N. Endley. 2020. “Fabrication of Nano-Silica from Agricultural Residue and Their Application.” In Nanomaterials for Agriculture and Forestry Applications , edited by H. Azamal and M. Jawaid, 107–134. Elsevier. Skočaj, M. 2019. “Bacterial Nanocellulose in Papermaking.” Cellulose 26 (11): 6477–6488. https://doi.org/10.1007/ s10570-019-02566-y. Sobri, Z., Z. M. Ainun, and E. S. Zainudin. 2018. “Distribution of Zinc Oxide Nanoparticles on Unbleached and Bleached Bamboo Paper via In-Situ Approaches.” IOP Conference Series, The Wood and Biofiber International Conference (WOBIC 2017), Selangor, Malaysia, 21–23 November 2017. Materials Science and Engineering. Sobri, Z., A. Zuriyati Mohamed Asa’ari, N. Yacob, P. San H’ng, L. Chuah Abdullah, and E. Syams Zainudin. 2021. “In Situ Formation of Zinc Oxide on Bamboo Bleached Pulp in Preparation of Antibacterial Paper: Effect of Precursors Addition.” BioResources 16 (3): 6121–6134. https://doi.org/10.15376/biores.16.3.6121-6134. Song, S., X. Zhen, M. Zhang, L. Li, B. Yang, and P. Lu. 2018. “Engineered Porous Calcium Silicate as Paper Filler: Effect of Filler Morphology on Paper Properties.” Nordic Pulp & Paper Research Journal 33 (3): 534–541. Spagnuolo, L., R. D’Orsi, and A. Operamolla. 2022. “Nanocellulose for Paper and Textile Coating: The Importance of Surface Chemistry.” ChemPlusChem 87 (8): e202200204. Stoimenov, P. K., R. L. Klinger, G. L. Marchin, and K. J. Klabunde. 2002. “Metal Oxide Nanoparticles as Bactericidal Agents.” Langmuir 18 (17): 6679–6686. Su, Z., L. Li, Z. Liu, C. Huang, D. Wang, and T. Wang. 2021. “Fabrication, Microstructure, and Hydration of Nano β- Ca2SiO4 Powder by Co-Precipitation Method.” Construction and Building Materials 296:123737. https://doi.org/10. 1016/j.conbuildmat.2021.123737. Taheri, A. A., M. Rahmaninia, and A. Khosravani. 2022. “Interaction of the Electrical Conductivity of Recycled Pulp Colloidal Suspension with Chitosan and Bentonite as a Papermaking Additive System.” BioResources 17 (1): 1805–1817. Taib, M. N. A. M. 2023. “Nanofillers in Pulp and Paper.” In Nanofillers for Sustainable Applications , edited by N. M. Nurazzi, E. Bayraktar, M. N. F. Norrahim, H. A. Aisyah, N. Abdullah and M. R. M. Asyraf, 198–213. CRC Press. Taib, M. N. A. M., W. Abdulhadi Yehye, N. Muhd Julkapli, and S. B. O. A. Abdul Hamid. 2018. “Influence of Hydrophobicity of Acetylated Nanocellulose on the Mechanical Performance of Nitrile Butadiene Rubber (NBR) Composites.” Fibers and Polymers 19 (2): 383–392. https://doi.org/10.1007/s12221-018-7591-z. Taib, M. N. A. M., T. Sue Yee, D. Trache, and M. Hazwan Hussin. 2024. “Modification on Nanocellulose Extracted from Kenaf (Hibiscus Cannabinus) with 3-Aminopropyltriethoxysilane for Thermal Stability in Poly (Vinyl Alcohol) Thin Film Composites.” Cellulose 31 (2): 997–1015. Taib, M. N. A. M., W. A. Yehye, and N. Muhd Julkapli. 2020. “Synthesis and Characterization of Nanocrystalline Cellulose as Reinforcement in Nitrile Butadiene Rubber Composites.” Cellulose Chemistry and Technology 54 (1): 11–25. Tajik, M., H. Resalati, Y. Hamzeh, H. Jalali Torshizi, H. Kermanian, and B. Kord. 2016. “Improving the Properties of Soda Bagasse Pulp by Using Cellulose Nanofibers in the Presence of Cationic Polyacrylamide.” BioResources 11 (4). https://doi.org/10.15376/biores.11.4.9126-9141. Tang, Y., Z. He, J. Alexander Mosseler, and Y. Ni. 2014. “Production of Highly Electro-Conductive Cellulosic Paper via Surface Coating of Carbon Nanotube/Graphene Oxide Nanocomposites Using Nanocrystalline Cellulose as a Binder.” Cellulose 21 (6): 4569–4581. https://doi.org/10.1007/s10570-014-0418-9.
Made with FlippingBook interactive PDF creator