Victron Energy Phoenix Chargers
Phoenix Smart IP43 Charger With boat owners in mind this adaptive 5-step charger can provide either 30A or 50A of charge to each of three battery banks. Or the Phoenix 1+1 model provides 3A to the starter-battery, the rest to the ‘house’ bank. 24V models are available with 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features – see the datasheet below. For voltage and temperature compensated charging order a wireless Smart Battery Sense. Features: • Bluetooth Smart enabled
• Preventing damage due to excessive gassing: the BatterySafe mode • Less maintenance and aging when the battery is not in use: the Storage Mode
• Phoenix Smart (1+1): two outputs to charge 2 battery banks • Phoenix Smart (3): three full current outputs to charge 3 battery banks • Automatic voltage compensation • Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage • The right amount of charge: variable absorption time
• Also charges Li-ion (LiFePO4) batteries • Fully programmable charge algorithm • Remote on-off
• VE.Direct interface • Programmable relay
12/30 (1+1) & (3)
12/50 (1+1) & (3)
24/16 (1+1) & (3)
24/25 (1+1) & (3)
Smart IP43 Charger
Input voltage
85 – 250 VAC (full power from 100 VAC, startup from 90 VAC)
DC input voltage range
90 – 375 VDC
Frequency Power factor
45-65 Hz
1
Back current drain
<1 mA
No load power consumption
1 W
Maximum Efficiency
95 %
94 %
96 %
96 %
Normal: 14.4 V / 13.8 V / 13.2 V High: 14.7 V / 13.8 V / 13.2 V Li-ion: 14.2 V / N/A / 13.5 V
Normal: 28.8 V / 27.6 V / 26.4 V High: 29.4 V / 27.6 V / 26.4 V Li-ion: 28.4 V / N/A / 27.0 V
Charge voltage - Absorption / Float /Storage
Fully programmable
Yes, with Bluetooth and/or VE.Direct
Maximum input current setting Number of battery connections Charge current house battery
3 – 10 A
(1+1) models: 2 (2nd output via 2 pole terminal & 4 A max) | (3) models: 3
30 A 15 A
50 A 25 A
16 A
25 A
Low current mode
8 A
12,5 A
Temperature compensation - Default
-16 mV/°C
-32 mV/°C
Charge current starter battery
4 A Max (1+1 output models only) 6-stage adaptive (3 stage for Li-ion)
Charge algorithm
Protection
Battery reverse polarity (fuse, not user accessible) / Output short circuit / Over temperature
Can be used as power supply
Yes, output voltage can be set with Bluetooth and/or VE.Direct
Operating temp. range
-20 to 60 °C (0 – 140 °F) Rated output current up to 40 °C, derate linearly to 20 % at 60 °C
Humidity (non-condensing)
max 95 %
Remote on/off
Yes (2 pole terminal)
Relay (programmable)
Yes (SPDT - 5 A up to 250 VAC / 5 A up to 28 VDC) Power: -4 dBm | Frequency: 2402 – 2480 MHz Enclosure
Bluetooth
Material & Colour Battery connection
Aluminium (blue RAL 5012) Screw terminals 16 mm² (AWG6)
AC-connection
IEC 320 C14 inlet with retainer clip (AC cord ordered separately) Electronic components: IP43 | Connection area: IP22
Protection category
Weight kg (lbs)
2,7 kg (6 lbs)
Dimensions (H x W x D)
180 x 249 x 116 mm (7.1 x 9.8 x 4.6 inch)
Standards
Safety
EN 60335-1, EN 60335-2-29
Emission Immunity Vibration
EN 55014-1, EN 61000-6-3, EN 61000-3-2
EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
IEC68-2-6:10-150Hz/1.0G
Product Catalogue.
131
Made with FlippingBook - Online catalogs