Victron Energy Phoenix Inverters
Phoenix Inverters - 250VA – 1200VA Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is atop quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left
hand contact of the two pole connector. VE.Direct Bluetooth Smart dongle
Using the VE.Direct to Bluetooth Smart dongle you can display information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data. (VE.Direct only available with 250 and 375 models).
12 Volt 24 Volt 48 Volt
12/250 24/250 48/250
12/375 24/375 48/375
12/500 24/500 48/500
12/800 24/800 48/800
12/1200 24/1200 48/1200
Phoenix Inverter
Cont. power at 25°C (1) Cont. power at 25°C / 40°C
250VA
375VA
500VA
800VA
1200VA
200 / 175W
300 / 260W
400 / 350W
650 / 560W
1000 / 850W
Peak power
400W
700W
900W
1500W
2200W
Output AC voltage / frequency (adjustable)
230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%
Input voltage range
9.2 - 17 / 18.4 - 34.0 / 36.8 - 62.0V
DC low shut down (adjustable) Dynamic (load dependent) DC low shut down (fully configurable)
9.3 / 18.6 / 37.2V Dynamic cut-off 10.9 / 21.8 / 43.6V 14.0 / 28.0 / 56.0V
DC low restart and alarm (adjustable)
Battery charged detect (adjustable)
Max. efficiency Zero-load power
87 / 88 / 88% 4.2 / 5.2 / 7.9W
89 / 89 / 90% 5.6 / 6.1 / 8.5W
90 / 90 / 91% 6 / 6.5 / 9W
90 / 90 / 91% 6.5 / 7 / 9.5W
91 / 91 / 92% 7 / 8 / 10W
Default zero-load power in ECO mode (default retry interval: 2,5 s, adjustable) ECO mode stop and start power setting
0.8 / 1.3 / 2.5W
0.9 / 1.4 / 2.6W
1 / 1.5 / 3.0
1 / 1.5 / 3.0
1 / 1.5 / 3.0
Adjustable
Protection (2)
a - f
Operating temperature range Humidity (non-condensing)
-40 to +65°C (fan assisted cooling) Derate 1,25% per °C above 40°C
max 95%
Enclosure
Material & Colour
Steel chassis and plastic cover (blue Ral 5012)
Battery - Connection Standard AC outlets
Screw terminals
230V: Schuko (CEE 7/4), IEC-320 (male plug included) UK (BS 1363), AU/NZ (AS/NZS 3112) 120V: Nema 5-15R
Maximum cable cross-section
10 mm² / AWG8
10 mm² / AWG8
10 mm² / AWG8
25/10/10mm² / AWG4/8/8 35/25/25 mm2 / AWG 2/4/4
Protection category
IP 21
Weight (Kg)
2.4kg / 5.3lbs 86 x 165 x 260
3.0kg / 6.6lbs 86 x 165 x 260
3.9kg / 8.5lbs 86 x 172 x 275
5.5kg / 12lbs
7.4kg / 16.3lbs 117 x 232 x 327
Dimensions (mm) H x W x D
105 x 216 x 305
Accessories
Remote on - off switch Automatic transfer switch
Yes
FILAX
Product Catalogue.
137
Made with FlippingBook - Online catalogs