Victron Inverter RS 48/6000 Smart
Inverter RS 48/6000 Smart Light weight, efficient and quiet Thanks to high frequency technology and a new design this powerful inverter weighs only 11 kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation. Display and Bluetooth The display reads battery and inverter parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device. In addition, Bluetooth can be used to set up the system and to change settings with VictronConnect. VE.Can and VE.Direct port VE.Can connection to a GX device for system monitoring, data logging, and remote firmware updates. VE.Direct connection to a GlobalLink 520 for remote data monitoring. I/O Connections Programmable Relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron smallBMS. Inverter RS Smart 48/6000 INVERTER DC Input voltage range 38 – 62 V (4) Output Output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0.1 % (1) Maximum continuous inverter current: 25 Aac Continuous output power at 25 °C Increases linearly from 4800 W at 46 VDC to 5300 W at 52 VDC Continuous output power at 40 °C 4500 W Continuous output power at 65 °C 3000 W Peak power 9 kW for 3 seconds 7 kW for 4 minutes Short-circuit output current 50 A Maximum efficiency 96.5 % at 1 kW load 94 % at 5 kW load Zero load power 20 W CHARGER Programmable Charger voltage range (VDC) 36 – 60 V Charge voltage 'absorption' (VDC) Default setting: 57,6 V (adjustable) Charge voltage 'float' (VDC) Default setting: 55,2 V (adjustable) Maximum charge current 88 A @ 57.6V Battery temperature sensor Included Battery voltage sense Yes GENERAL Parallel and 3-phase operation 12 parallel units supported, 3 phase supports 4 units per phase Programmable relay (3) Yes Protection (2) a - g Data Communications VE.Direct port, VE.Can port & Bluetooth Bluetooth frequency & power 2402 – 2480 MHz, 4dBm General purpose analogue/digital in port Yes, 2x Remote on-off Yes Operating temperature range -40 to +65 °C (fan assisted cooling) Maximum altitude 2000 m Humidity (non-condensing) max 95 % ENCLOSURE Material & Colour steel, blue RAL 5012 Protection category IP21 Battery-connection M8 bolts 230 VAC-connection Screw terminals 10 mm² (6 AWG) Weight 11 kg Dimensions (H x W x D) 425 x 440 x 125 mm STANDARDS Safety EN-IEC 60335-1, EN-IEC 62109-1, EN-IEC 62109-2 Emission, Immunity EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 1) Can be adjusted to 60 Hz. 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) 230 VAC on inverter output g) Solar earth leakage. 3) Programmable relay which can be set for general alarm, DC under voltage or genset start/stop function. DC rating: 4A up to 35 VDC and 1 A up to 70 VDC. 4) Minimum start-up voltage is 41 V. Inverter shutdown can be set as low as 32 VDC, but may shut down on low AC output voltage (due to load). Over-voltage disconnect is 65.5 V.
Product Catalogue.
139
Made with FlippingBook - Online catalogs