Victron Energy DC-DC Converters
Buck-Boost DC-DC Converter 25A, 50A and 100A DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator (regenerative braking, Euro 5 and Euro 6 engines) The Buck-Boost DC-DC Converter is a DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator. The converter will charge the auxiliary battery with a pre-set charge voltage, eliminating high voltages (e.g. Mercedes: 15.4V) and low voltages. Features • Engine running detection system • Fully programmable • Charge current & input current limiter • LED status indication
Buck-Boost DC-DC Converter
25A
50A
100A
Input voltage range
10-30V
Under voltage threshold Output voltage range Maximum charge current
10V
10-30V
12V : 25A / 24V : 15A
12V : 50A / 24V : 25A
12V : 100A / 24V : 50A
Power consumption
Converter off, LEDs off (power save mode)
7 mA
On/off input (pin 1, purple wire)
‘On’ threshold voltage Maximum input voltage
> 2V 30V
Output pin 1 and pin 2
Output voltage if activated Maximum current (per pin) Operating temperature range
Vpinout = Vin Ipinout = 1A
-25 +60°C
Ambient temperature
Max current: up to 60°C
0.6k g
4.1k g
Weight
1.4kg
Dimensions
288 x 162 x 95mm
165 x 120 x 30mm
213 x 120 x 30mm
Isolation Transformers Indispensable in professional marine energy systems. It prevents electrolytic corrosion and above all serves as a device to guarantee a safe electric system. Toroidal wound technology for quietness and high efficiency. Soft start circuitry will ensure that the shore circuit breaker will not trip when plugged in.
3600 Watt Auto 115/230V (1) 115 / 230V (Auto Switching)
Isolation Transformers
2000 Watt (1)
3600 Watt (1)
7000 Watt
Input and output voltage
115 / 230V
115 / 230V
230 V
Frequency
50/60Hz 17 / 8.5A
50/60Hz 32 / 16A
50/60Hz 32 / 16A
50/60Hz
Rating
32A
Soft start
Yes
Transformer type
Toroidal (low noise, low weight)
Load disconnect delay
Yes
Enclosure
Common characteristics
Material: Aluminium (blue RAL 5012) Protection Category IP21
Weight (Kg)
10
23
24
28
Dimensions (mm) H x W x D 375 x 214 x 110
362 x 258 x 218
Standards
Safety
EN60076
1) Can be used as: 115V to 115V isolation transformer 115V to 230V isolation transformer
230V to 230V isolation transformer 115V to 115V isolation transformer
Product Catalogue.
149
Made with FlippingBook - Online catalogs