Veloris Comprehensive Catalogue 2025 (v1)

Orion-Tr Smart DC-DC charger non- isolated 360/400 Watt with 3-stage battery charge algorithm The Orion-Tr Smart DC-DC charger non-isolated is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Features • Bluetooth Smart enabled • Fully programmable • Adaptive 3-stage charge algorithm

Orion-Tr Smart non-isolated 12/12-30

• Remote on-off • IP43 protection

Orion-Tr Smart Chargers non-isolated 360 - 400 Watt

12/12-30 (360 W)

12/24-15 (360 W)

24/12-30 (360 W)

24/24-17 (400 W)

10-17 V

10-17 V

20-35 V

20-35 V

Input voltage range (1) Under voltage shut down Under voltage restart Nominal output voltage Output voltage adjust range Output voltage tolerance

7 V

7 V

14 V 15 V

14 V 15 V

7,5 V

7,5 V

12,2 V

24,2 V

12,2 V

24,2 V

10-15 V

20-30 V

10-15 V

20-30 V

+/- 0,2 V 2 mV rms

Output noise

Cont. output current at nominal output voltage and 40 °C Maximum output current (10 s) at nominal output voltage minus 20%

30 A

15 A

30 A

17 A

40 A

25 A

45 A

25 A

Short circuit output current Cont. output power at 25 °C Cont. output power at 40 °C

60 A

40 A

60 A

40 A

430 W 360 W

430 W 360 W

430 W 360 W

480 W 400 W

Efficiency

87 %

88 %

88 %

89 %

No load input current

< 80 mA

< 100 mA < 100 mA

< 80 mA

Standby current

Less than 1 mA

Operating temperature range

-20 to +55 °C (derate 3 % per °C above 40 °C)

Humidity

Max. 95 % non-condensing

DC connection

Screw terminals 16 mm² (AWG6)

Maximum cable cross-section

Weight

12 V input and/or 12 V output models: 1,8 kg (3 lb) Other models: 1,6 kg (3.5 lb)

Dimensions H x W x D Protection category

130 x 186 x 80 mm (5.1 x 7.3 x 3.2 inch)

IP43 ( electronic components ), IP2 2 (connection area)

Standards:

Safety

EN 60950

Emission Immunity

EN 61000-6-3, EN 55014-1

EN 61000-6-2, EN 61000-6-1, EN 55014-2

Automotive Directive

ECE R10-5

1) If set to nominal or lower than nominal, the output voltage will remain stable within the specified input voltage range (buck-boost function). If the output voltage is set higher than nominal by a certain percentage, the minimum input voltage at which the output voltage remains stable (does not decrease) increases by the same percentage. Note 1: The VictronConnect App will not display current in or current out. Note 2: The Orion-Tr Smart is not equipped with a VE.Direct port.

Product Catalogue.

153

Made with FlippingBook - Online catalogs