Veloris Comprehensive Catalogue 2025 (v1)

Victron Energy Monitoring

SmartShunt - Smart Battery Shunt The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor. Differences compared to BMV712 Battery Monitor • No programmable visual and audible alarm. • No programmable relay

SmartShunt

500A / 1000A / 2000A

Supply voltage range

6,5 - 70 VDC

Current draw

< 1mA

Input voltage range, auxiliary battery

6,5 - 70 VDC

Battery capacity (Ah)

1 - 9999 Ah

Operating temperature range

-40 +50°C (-40 - 120°F)

Measures voltage of second battery, or temperature, or midpoint

Yes

Temperature measurement range

-20 +50°C

Basic Shunt Wiring

VE.Direct communication port

Yes

Resolution & Accuracy

Current Voltage

± 0.1A

± 0.01V ± 0.1 Ah ± 0.1% ± 1 min

Amp hours

State of charge (0 – 100%)

Time to go

Temperature (if optional temperature sensor connected) Accuracy of current measurement

± 1°C/°F (0 - 50°C or 30 - 120°F)

± 0.4%

Offset

Less than 20 / 40 / 80 mA

Accuracy of voltage measurement

± 0.3%

Installation & Dimensions

500A: 46 x 120 x 54 mm 1000A: 68 x 120 x 54 mm 2000A: 68 x 120 x 76 mm

Dimensions (H x W x D)

Protection category

IP21

Standards

Wiring for use as DC meter

Safety

EN 60335-1

EN-IEC 61000-6-1 EN-IEC 61000-6-2 EN-IEC 61000-6-3

Emission / Immunity

Automotive

EN 50498

Models: 500A, 1000A, 2000A

Two cables with 1A fuse, for ‘+’ connection and starter battery or midpoint connection

Cables (included)

Temperature sensor

Optional (ASS000100000)

Veloris. The Battery Partner.

158

Made with FlippingBook - Online catalogs