Solar Charge Controllers
Victron Controllers The main function of a regulator is to charge batteries by regulating the charge current to the battery without allowing it to be overcharged. It also prevents current from being drawn back out of the battery at night. Some controllers may also have a low voltage disconnect, which powers down the load when the batteries become overly discharged.
Victron’s standard range of PWM controllers are available in 5, 10 or 20A and suitable for 12/24V systems. They all feature an internal temperature sensor and three stage charging. They are also protected against over current, short circuit and reverse polarity. The Duo has all the same features as the standard PWM but can charge 2 separate battery banks at the same time and features programmable charge current ratio and charge voltage settings for Gel, AGM and Flooded.
BlueSolar PWM-Light • Load output with low battery voltage disconnect function. • Lighting control function, one timer only. • Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting. • Three stage battery charging (bulk, absorption, float), not
programmable. • Load output protected against over load and short circuit. • Protected against reverse polarity connection of the solar array and/or battery. • Day/night timing options: see manual for details
BlueSolar PWM-Light
Battery Voltage
Charge Current
Second Battery Output
Self Consumption
Operating Temp. -20 to +50°C -20 to +50°C -20 to +50°C -20 to +50°C
BlueSolar 12/24-5 12/24 Auto Select BlueSolar 12/24-10 12/24 Auto Select BlueSolar 12/24-20 12/24 Auto Select BlueSolar 12/24-30 12/24 Auto Select
5A
No No No No
6mA 6mA 6mA 6mA
10A 20A 30A
BlueSolar PWM-Pro The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable.
• Lighting control function, fully programmable. • Three stage battery charging (bulk, absorption, float), fully programmable. • Integrated battery monitor function (Remote Panel needed to display state of charge). • Load output with low voltage disconnect and manual control
(default setting). • Optional external temperature sensor. • Load output protected against over load and short circuit. • Protected against reverse polarity connection of the solar panels and/or battery. • Day/night timing options: see manual Remote Panel for details.
Battery Voltage
Charge Current
Second Battery Output
Self Consumption
Operating Temp.
BlueSolar PWM-Pro
BlueSolar 12/24-5 12/24 Auto Select BlueSolar 12/24-10 12/24 Auto Select BlueSolar 12/24-20 12/24 Auto Select BlueSolar 12/24-30 12/24 Auto Select BlueSolar DUO 12/24-20 12/24 Auto Select
5A
No No No No Yes
6mA 6mA 6mA 6mA 4mA
-20 to +50°C -20 to +50°C -20 to +50°C -20 to +50°C -20 to +50°C
10A 20A 30A 20A
BlueSolar PWM Charge Controller-LCD&USB 12/24V & 48V
• Two 5 Volt USB outputs • Load output
• Liquid crystal display • Programmable battery charge algorithm
BlueSolar PWM Charge Controller
Battery Voltage
Charge Current
Maximum solar voltage
Self Consumption
Operating Temp.
12/24-5 12/24-10 12/24-20 12/24-30
12/24 Auto detect 12/24 Auto detect 12/24 Auto detect 12/24 Auto detect 12/24 Auto Select
5A
28V / 55V 28V / 55V 28V / 55V 28V / 55V
< 10 mA < 10 mA < 10 mA < 10 mA < 10 mA < 10 mA < 10 mA
35 to +60°C (full load) 35 to +60°C (full load) 35 to +60°C (full load) 35 to +60°C (full load) 35 to +60°C (full load) 35 to +60°C (full load) 35 to +60°C (full load)
10A 20A 30A 10A 20A 30A
48-10 48-20 48-30
100V 100V 100V
48V 48V
Veloris. The Battery Partner.
170
Made with FlippingBook - Online catalogs