Video Inspection Software User’s Guide
Select a tolerance type and press a data field
Enter tolerance values using the keypad
Go to the Deviation Screen to Observe Results To observe the results of tolerance tests: 1 Press the Tolerance button of the Tolerance Feature Detail screen to display the Deviation screen. Tolerance results and the applied tolerances will be displayed numerically and graphically. 2 Press the Done button to return to the Home view. Measure toolbar > Done button
Failed tolerances are shown in red
Tolerance results are shown on the Deviation screen
Failed tolerances will be shown in red in the Feature List, Part View, Part Detail screen and on the Report screen.
Entering Nominal Values using Auto-Round Auto-rounding can often save time when repetitively entering nominal feature data. Often measured values are close to blueprint nominal values. Using Auto-rounding, the nominal values for each coefficient of a feature can quickly be rounded up or down to match the nominal values on engineering drawings. To enter nominal values using Auto- rounding: 1 Once a feature has been selected in the Feature List, navigate to the Nominal Feature Detail screen as described earlier. 2 Press in a nominal field. The field will become blue and the keypad will appear. 3 Press the digit that you would like to round. In this example, the second digit to the right of the decimal point was pressed which rounded the last two digits from 16 to 20. The digit selected will cause rounding either up or down based on the value of the digit to its immediate right.
110
Made with FlippingBook - professional solution for displaying marketing and sales documents online