Video Inspection Software User’s Guide
Run Zero Tab Part programs are often edited over the course of many runs resulting in changes in the results data through its history of runs. The run data is retained throughout the history of runs, but some data might not reflect the current state of the part program. To see the current part program state: 1 Press the Run Zero Tab Results View window > Run Zero tab Delete Tab Run tabs can be deleted from the Result view if desired. To delete run tab(s): 1 Select a single tab by pressing it, or multiple tabs using the multi--select tool above the Feature List. 2 Press the Delete tab in the Report toolbar to
Run Zero and Delete tabs
delete the selected run tab(s) Report toolbar > Delete tab
Results Statistical Analysis Feature
Results can be analyzed in a unified form using the Statistical Analysis Feature. This feature can report the Min, Max, Range, Average, Standard Deviation, or Six Sigma result for a given population of feature measurements. The Statistical Analysis feature provides a simple way of comparing measurement results from several like features. As an example, if you measure six bore features in a bolt hole pattern, you can measure them and then construct a Stats feature from these parent circles and quickly determine the largest, smallest, and average of the six diameters. This applies to all feature types and can be used on all coefficients. The results of the Statistical Analysis feature can be toleranced and can be also included in a report or part program. NOTE The Statistical Analysis feature is disabled by default. It can be enabled by assigning it to the measure toolbar or Extra menu list. To enable it, set the Display stats measurement button in Desktop screen of system Settings to either Extra or Desktop.
135
Made with FlippingBook - professional solution for displaying marketing and sales documents online