Video Inspection Software User’s Guide
Adding a Part to the Program Finder The part program must be added to the Program Finder list before the system can load the program automatically when the part pattern is recognized in the field of view. The part can be added: • With Auto Play button displayed OR • Without Auto Play button displayed Adding a Part Program with Auto Play Auto Play runs a part program automatically when the part pattern is recognized in the field of view. When Auto Play is displayed in the System toolbar, the Auto Play function is shown either enabled or disabled.
If the Auto Play button is not displayed, use the Adding a Part Without Auto Play procedure discussed in the next paragraphs. If the Auto Play button is displayed, in either enabled or disabled mode, use this procedure to add a part to the Program Finder. To add the part: 1 Long-press either Auto Play button to display the Program Finder Settings screen. System toolbar > Long-press Auto Play
Disabled
Enabled
2 Press the Add button to display the Open Part File dialog, select the program and press Open. The program will be added to the Program Finder list. 3 Press Done to exit from the Settings screens Measure toolbar > Done
169
Made with FlippingBook - professional solution for displaying marketing and sales documents online