Video Inspection Software User’s Guide
Focus Assist in Manual Systems To use focus assist in a manual system: 1 Position the standard or active crosshair over the desired part edge. 2 Enable the Auto Focus mode. Measure toolbar > Focus Mode button 3 Press and drag the triangle handles of the region of interest to change its size if desired. 4 Press in the region of interest to initiate auto focus assist. A grid will appear. 5 Raise and lower the z-axis through the range of focus until the Stage Position indicated in the measure prompt changes to indicate a Target position. The grid will be red when the system is out of focus, and green when the system is in focus.
Enable Auto Focus
Change size if desired
Out of focus low
Out of focus high
Focus point found
6 Raise or lower the z-axis to reduce the Target value to zero at the optimum focus position.
27
Made with FlippingBook - professional solution for displaying marketing and sales documents online