Video Inspection Software User’s Guide
3 Position the crosshair probe over the desired feature edge and then press and drag the triangle handles of the region of interest to change its size if desired. 4 Press the desired feature measurement button and then press in the Measure Prompt or press the Enter button to initiate the Auto Focus measurement. The Auto Focus grid will be shown. In this example, the Measure Point button was pressed. Measure toolbar > Measure Point button Measure toolbar > Enter button 5 Raise and lower the z-axis through the range of focus until a point is probed and shown in the measure prompt viewport.
Out of focus z-axis low
Out of focus z-axis high
In focus, point probed
6 Press the Done button to complete the measurement and enter the point into the Feature List. Measure toolbar > Done button
Measurement completed
Auto Focus Measurements in CNC Systems Using Standard and Active Crosshairs To perform Auto Focus measurements in CNC Systems using Standard and Active Crosshairs: 1 Select the standard or active crosshair probe from the probe menu. Measure toolbar > Probe menu > Standard or active crosshair probe 2 Enable Auto Focus (if it is not already enabled). Measure toolbar > Auto Focus button 3 Position the crosshair probe over the desired feature edge and then press and drag the triangle handles of the area of interest to change its size if desired. 4 Press the desired feature measurement button and then press in the Measure Prompt or press the Enter button to initiate the Auto Focus measurement. The Auto Focus grid will be shown and the CNC system will raise and lower the z-axis through the range of focus to acquire a point in the optimum focal plane. In this example, the Measure Point button was pressed. Simple crosshair selected Auto focus enabled
29
Made with FlippingBook - professional solution for displaying marketing and sales documents online