Video Inspection Software User’s Guide
Crosshair positioned and sized
Auto Focus measurement initiated
In focus, point probed
Measure toolbar > Measure Point button Measure toolbar > Enter button 5 Press the Done button to complete the measurement and enter the point into the Feature List. Measure toolbar > Done button
Measurement completed
Auto Focus Measurements in CNC Systems using the Vtouch Probe To perform Auto Focus measurements in CNC Systems using the Vtouch probe: 1 Select the Active crosshair probe from the probe menu. Measure toolbar > Probe menu > Active crosshair 2 Enable Auto Focus (if it is not already enabled). Measure toolbar > Auto Focus button 3 Press the desired
Auto focus enabled
feature edge. The probe will move to the edge and the auto focus grid will appear. Then the CNC system will raise and lower the z-axis through the range of focus to acquire a point in the optimum focus plane. The point will be entered into the Feature List and the probe will return to the center of the screen. Vtouch probe selected Touch the desired edge
A point is entered into the Feature List
30
Made with FlippingBook - professional solution for displaying marketing and sales documents online