Video Inspection Software User’s Guide
Auto Focus Measurements in CNC Systems using the MeasureLogic Probe To perform Auto Focus measurements in CNC Systems using the MeasureLogic probe: 1 Select the MeasureLogic probe from the probe menu. Measure toolbar > Probe menu > MeasureLogic probe 2 Enable Auto Focus (if it is not already enabled). Measure toolbar > Auto Focus button
3 Press the desired feature edge. The CNC system will raise and lower the z-axis through the range of focus to acquire points along the edge in the optimum focal plane. The points will be evaluated by the system and the appropriate feature will be entered into the Feature List.
MeasureLogic and Auto focus enabled
A feature is automatically entered into the Feature List
Touch the desired edge
Auto Focus Measurements in CNC Systems using the EyeMeasure Probe To perform Auto Focus measurements in CNC Systems using the EyeMeasure probe: 1 Select the MeasureLogic probe from the probe menu. Measure toolbar > Probe menu > MeasureLogic probe 2 Press and drag along the desired feature edge to position the EyeMeasure probe over the edge.
3 Press and drag the probe handles to change the probe size if desired and then enable Auto Focus (if it is not already enabled). Measure toolbar > Auto Focus button The probe sizing handles will turn red to indicate that the Auto Focus mode is enabled. 4 Press inside the EyeMeasure probe to initiate a measurement. The CNC system will raise and lower the z-axis through the range of focus to acquire points along
Press and drag the EyeMeasure probe along an edge
the edge in the optimum focal plane. The points will be evaluated by the system and the appropriate feature will be entered into the Feature List.
A feature is automatically entered into the Feature List
Enable Auto Focus
31
Made with FlippingBook - professional solution for displaying marketing and sales documents online