Video Inspection Software User’s Guide
Perpendicular distance
•
Plane Constructions Plane constructions include: • Duplicate plane •
Least squares of best fit plane from three or more positional features • A point aligned with XY • Multipoint from points (fit plane) • Multipoint from circles (fit plane) • Two planes (mid-plane)
Sphere Constructions • Duplicate •
Multipoint from points (fit sphere)
Cylinder and Cone Constructions • Duplicates • Multipoint fit from points • Two circles define ends of cylinder or cone Feature Construction Procedures There are two procedures for feature construction: • Gauge circle and gauge line constructions • All other feature constructions
Construction Procedures for Gauge Circle and Gauge Line Gauge circle and gauge line constructions include: • Gauge circle between 2 lines • Gauge circle between 2 arcs • Gauge line between 2 lines
Gauge circle between two lines To construct a gauge circle between two lines:
1 Create a circle of the desired diameter (creating features is discussed immediately after this section). The diameter of the created circle must be larger than the minimum distance between the two lines. 2 Press the Measure Circle button. Measure toolbar > Measure Circle button 3 Select the desired two parent lines and the created circle from the Feature List. 4 Press the Done button to complete the construction. The gauge circle will be shown between the two parent lines in the Part View and will be added to the Feature List. Measure toolbar > Done button
69
Made with FlippingBook - professional solution for displaying marketing and sales documents online