Video Inspection Software User’s Guide
Gauge circle between two arcs To construct a gauge circle between two arcs:
1 Create a circle of the desired diameter (creating features is discussed immediately after this section). The diameter of the created circle must be larger than the distance between the two arc perimeters. 2 Press the Measure Circle button. Measure toolbar > Measure Circle button 3 Select the desired two parent arcs and the created circle from the Feature List. 4 Press the Done button to complete the construction. Gauge circle 1 will be shown between the two parent arcs in the Part View and will be added to the Feature List. Press the Change Feature Type button to alternate between Gauge circle 1 and Gauge circle 2. Measure toolbar > Done button 1 Create a line of the desired length (creating features is discussed immediately after this section). The length of the created line must be longer than the minimum distance between the two parent lines and must be horizontal or vertical. 2 Press the Measure Line button. Measure toolbar > Measure Line button 3 Select the desired two parent lines and the created line from the Feature List. 4 Press the Done button to complete the construction. The gauge line will be shown between the two parent lines in the Part View and will be added to the Feature List. Measure toolbar > Done button Gauge line between two lines To construct a gauge line between two lines:
Construction Procedures for all Other Features All feature constructions (except for gauge circles and gauge lines described earlier) use the following procedure: 1 Press the Measure Feature button of the feature type that you wish to construct. Measure toolbar > Measure Feature button 2 Select (highlight) the required parent features from the Feature List. 3 Press the Done button to complete the construction. The constructed feature will be shown in the Part View and entered in the Feature List. Measure toolbar > Done button Changing Constructed Feature Type Many constructed features can have more than one feature type. For example, an angle constructed between two lines can be any one of 4 types: included, 180-, 180+ and 360-. To change the feature type: 1 Select the constructed feature in the Part View or from the Feature List. 2 Press the Change Type button and note the feature type description shown in the Feature Detail viewport in the upper left portion of the screen. Measure toolbar > Change Feature Type button NOTE The Change Feature Type button is shown in the Measure toolbar when feature type alternatives exist. If the button is not present in the Measure toolbar, only one type of feature exists for the selected construction.
3 The feature type can also be changed in the Feature Detail viewport. Press in the small feature detail viewport in the upper left portion of the screen to display the Feature Detail viewport.
70
Made with FlippingBook - professional solution for displaying marketing and sales documents online