Cabinet Hardware e-Catalogue - Lincoln Sentry

INDEX

Drawer Systems TIP-ON BLUMOTION for TANDEMBOX

Drawer Systems TIP-ON BLUMOTION for TANDEMBOX

Planning

Base leg

Support for synchronisation linkage

Required for cabinet widths ≥ 750 mm

A TANDEMBOX ‘M’ height drawer is used as an example in the following planning graphics.

TIP-ON BLUMOTION units L1, L3, L5 (NL ≥ 350–550 mm)

TIP-ON BLUMOTION units S0, S1 (NL < 350 mm)

Uni Chipboard Screw 3.5 x 13mm

Furniture construction

Code

Phillips head 13 x 3.5mm

Qty

2-242-3513

281000

Screw position, TIP-ON BLUMOTION for inner drawers and inner pull-outs

To ensure a front gap of at least 2.5 mm, precise manufacturing is required, so it should be ensured that planned measurements and angle accuracy are adhered to.

A

Variant 1

Variant 2

A=B

A=B

Front assembly – do not assemble buffers

42

37

The exact depth position of both cabinet profiles is critical.

Bumpers and buffers should not be assembled for TIP-ON BLUMOTION!

Space requirements in the cabinet – drawer

Space requirements in the cabinet – inner drawer

* For 36–39 mm: Bear in mind the position of the base leg, support for synchronisation linkage and base support bracket required for cabinet widths of 750 mm and above, in order to prevent a collision between the synchronisation linkage and the cabinet base or cross member. A trial application is recommended.

CONTENTS

B.152

B.153

DRAWER SYSTEMS

DRAWER SYSTEMS

Dimension data and specifications may change without notification.

LINCOLN SENTRY

Made with FlippingBook Learn more on our blog