MULTI-STAGE / multi-outlet
solids handling
CF
SHM
SHL
SHS
Freeway
Freestream
Industry
Water
Industry
Water
Industry
Industry
Water
Industry
Water
Industry
cONFIGURAtION Multi-stage pump with modular construction
cONFIGURAtION Horizontal non-clog pumps having single stage, single suction with back pull out type design
cONFIGURAtION Horizontal and vertical single stage solids handling pump
cONFIGURAtION Vertical non-clog pumps for wet pit applications, these pumps can be offered with a column length up to 6.5M
cONFIGURAtION Vertical direct mounted or open shaft electric motor driven
cONFIGURAtION Horizontal, vertical open shaft, vertical direct mounted
DISchARGE & PERFORmANcE  • Delivery size up to 50 mm • Outputs up to 20 m 3 /h
DISchARGE & PERFORmANcE  • Delivery up to 200 mm • Outputs up to 800 m 3 /h • Head up to 90 m
DISchARGE & PERFORmANcE  • Delivery up to 900 mm • Outputs 13,000 m 3 /h • Heads up to 82 m
DISchARGE & PERFORmANcE  • Delivery up to 300 mm • Outputs up to 800 m 3 /h • Head up to 90 m
DISchARGE & PERFORmANcE  • 75 mm to 600 mm • Outputs up to 4320 m 3 /h • Heads up to 100 m
DISchARGE & PERFORmANcE  • Delivery up to 200 mm • Outputs up to 1080 m 3 /h • Heads up to 90 m
• Head up to 315 m • Temp up to 120 °C 
FEAtURES • Channel multi-stage, Modular Construction
FEAtURES • Back pull-out design • Solids handling up to 105 mm • Impeller type non clog • Oil or grease lubricated bearing housing • Mechanical seal or gland packed • Temp up to 140 °C
FEAtURES • Solids handling up to 300 mm • Mechanical seal or gland packed • Impeller enclosed or semi open type • Grease or oil lubrication • Available in various materials
FEAtURES • Solids handling up to 105 mm • Mechanical seal or gland packed • Available in various materials • Impeller non clog type • The pump unit is suspended by a column pipe which also protects the transmission shaft.
FEAtURES • Separate pump and motor • Pump rotating element incorporation bearing and seal arrangement • Hydraulic loads taken by pump bearing assembly, not motor bearings • Double cartridge mechanical seal option • Hydraulic design – low specific speed designs • Bespoke wear liner • Large solids passing capacity • Hardened metallic impeller option • Positively locked impeller
FEAtURES • High efficiency spiral vane impeller designed to handle large solids, thick sludges and fibrous materials • Impeller cut to specific duty • Modular construction to maximise interchangeability • Steep H/Q curves mean that changes in pumping head can be tolerated without significant loss of efficiency • Soft packing or mechanical seals
• Gland Packed / Mechanical Seal • Electrical Drive / Engine Drive • Self priming • Conforming to DIN 24254
16
17
Made with FlippingBook - Online magazine maker