Solids Handling
FIRE PACKAGES
API
Prepackaged Pump Houses
Solids Diverter
Package Sets
OH2 – KESS
BB1 – Hydrostream
BB2 – KBSD
OIL & GAS Industry
OIL & GAS Industry
OIL & GAS Industry
Water
INDUSTRY
FIRE
OIL & GAS
FIRE
OIL & GAS
cONFIGURAtION Design and supply of enclosure and installation inside of main fire pump sets, jockey pump, controllers, starters, all internal pipe work, test line, flow meter, wiring and lighting to provide a fully packaged unit.
cONFIGURAtION Electric motor drive, tank packages
cONFIGURAtION Single or multiple pump package sets, horizontal end suction close and long coupled, split case long coupled, multi-stage multi-outlet and vertical turbine all electric motor or engine driven DISchARGE & PERFORmANcE  • End Suction (Single Stage) – 32 mm to 150 mm. Outputs up to 500 m 3 /h Heads up to 15.2 bar • Outputs up to 230 l/s Heads up to 60 bar • Split Case – 80 mm to 300 mm. Heads up to 44.5 bar (Approved fire set) • Multi-stage multi-outlet – 100mm to 125mm. Outputs up to 315 l/s. Heads up to 60 bar • Vertical Turbine – 200 mm to 508 mm Outputs up to 9000 m 3 /h • Multi-stage / multi-outlet – 50mm to 250 mm. Outputs up to 850 m 3 /h. Heads up to 850m. Up to 140 o C FEAtURES • Meeting the requirements of worldwide insurance and approvals bodies • End Suction – Centreline discharge back pull-out rotating element can be removed without disturbing pipe work • End Suction – Close coupled, space and cost saving solution • Axially split case rotating element can be removed without disturbing pipework • Rigid, box-section baseplates for end suction and split case long coupled packages • Stainless steel shaft with tight tolerances designed to transmit the maximum load across full pump curve • Bearing arrangements of ample proportion • IE2 motors fitted as standard • Impellers machined and hand finished to meet customer duty
cONFIGURAtION Single stage, single suction, overhung, radially split, centreline mounted
cONFIGURAtION Single stage, between bearing, axially split, foot mounted
cONFIGURAtION Single stage, between bearing, radially split, centreline mounted
DISchARGE & PERFORmANcE  • 100 mm to 200 mm • Outputs up to 75 m 3 /h • Heads up to 40 m
DISchARGE & PERFORmANcE  • Outputs up to 2000 m 3 /h (8800 US.gpm) • Head up to 400 m (1300 ft)
DISchARGE & PERFORmANcE  • Outputs up to 9000 m 3 /h (40,000 US.gpm) • Head up to 500 m (1640 ft)
DISchARGE & PERFORmANcE  • Outputs up to 6000 m 3 /h (26,420 US.gpm) • Head up to 550 m (1800 ft)
DISchARGE & PERFORmANcE  • End Suction (Single Stage) – 32 mm to 150 mm • Outputs up to 500 m 3 /h. Heads up to 15.2 bar • End Suction (multi-stage) – 100 mm to 125 mm • Outputs up to 830 m 3 /h. Heads up to 60 bar • Split Case – 80 mm to 300 mm • Outputs up to 9000 m 3 /h. Heads up to 44.5 bar • Vertical Turbine – 200 mm to 508 mm • Outputs up to 315 l/s. Heads up to 31.1 bar FEAtURES • Delivered complete, ready for immediate installation on simple foundations • Ease of site installation and connection • Single responsibility for complete pump house • Fully tested and pre-commissioned using advanced computerised testing facilities • Individually engineered to customer requirements • Containerised CAD design • Wall insulation reduces environmental noise
FEAtURES • Automatic totally enclosed sewage pumping station • Low noise levels • High efficiency pumping units • Minimum maintenance – unique system avoids solids passing through pumps so eliminates blockage • 4 sizes of plant available to suit inflow conditions • Suitable for basement installation • Clean and environmentally friendly • Economical to operate
FEAtURES • Full package compliance with API 610 & API 682 standards • Back pull-out casing to aid maintenance • Parts interchangeability between models • Low NPSH performance (inducer available for extreme conditions) • Reduced maintenance due to balanced axial thrust from impeller wear-ring and balance holes • Bearing lubrication by oil flinger as standard. Oil mist retrofit option available
FEAtURES • Generally in compliance with API 610 standards • Single stage double entry enclosed impeller • High efficiency product • Parts interchangeability between models • Low NPSH performance • Reduced maintenance due to balanced axial thrust from double entry impeller • Bearing lubrication by oil flinger • Serviceable without removing suction and discharge pipework • Ease of access to rotating assembly by axially split casing design • Removal of bearings and seals without splitting casing
FEAtURES • Full package compliance with API 610 & API 682 standards • Single stage double entry enclosed impeller • High efficiency • Parts interchangeability between models • Low NPSH performance • Reduced maintenance due to balanced axial thrust from double suction impeller • Bearing lubrication by oil flinger. Oil mist retrofit option available • Serviceable without removing suction and discharge pipework • East fitment and removal of coupling with tapered pump shaft end
18
19
Made with FlippingBook - Online magazine maker