(1) Minimum Width . Lots shall be a minimum of 25 feet in width.
(2) Minimum Square Feet . Lots shall be a minimum of 1,000 square feet.
f.
Building Footprint
The following standards shall apply to the building footprint unless otherwise stated in this Ordinance:
(1)
Minimum & Maximum Footprint .
A. Lots smaller than 4,800 square feet are permitted to have 100% lot coverage.
B. Lots 4,800 square feet or greater shall not exceed 80% lot coverage.
g. Block Standards
Maximum lot sizes shall be subject to the maximum block length criteria. Parcels and/or parcel assemblies greater than 800 feet in length, or greater than 2,400 feet in perimeter, shall be required to have public street right-of-way conveyed as part of the site plan approval sufficient to meet the lot and building footprint standards above. (1) Block face length may be adjusted by up to 10% by administrative adjustment to accommodate specific site conditions. The applicant must provide a written request, including reasoning for each of the findings provided below, in addition to the findings required for administrative adjustment approval elsewhere in the Land Development Ordinance. The Town Manager or designee must find the applicant has demonstrated need based on the findings submitted.
A. The block size adjustment requested will not adversely affect the zoning district by impeding walkability.
(2) Blocks adjacent to environmentally sensitive or historic land or preexisting incomplete blocks may be exempt from block face length and block perimeter requirements by administrative adjustment, as per the requirements of Article Q Procedures & Administration.
h. Building Entry Location & Ancillary Uses
Made with FlippingBook interactive PDF creator