EC 20 flat ∅ 20 mm, brushless, 5 watt, with integrated electronics 4-Q-Speed Controller
IP 40
IP 00
M 1:1
Stock program Standard program Special program (on request)
Part Numbers
5 wire version Enable Direction
IP 40 (with cover) IP 00 (without cover)
688693 688713
688692 688712
Motor Data
Values at nominal voltage 1 Nominal voltage 2 No load speed 3 No load current 4 Nominal speed 5 Nominal torque
24
24
V
6000 32.9 6000 7.31 0.377 13.2 0.73
6000 32.9 6000 7.31 0.377 13.2 0.73
rpm mA rpm mNm mNm A A
6 Nominal current (max. continuous current)
33 Max. torque 34 Max. current 9 Max. efficiency Characteristics 35 Type of control 36 Supply voltage +V CC
%
54
54
Speed
Speed
10…26.4 10…26.4 0.33…10.78 0.33…10.78 600 600 200…6480 200…6480 6000 6000
V V
37 Speed set value input 38 Scale speed set value input 39 Speed range 40 Max. acceleration
rpm/V rpm rpm/s
Specifications
Operating Range
Comments
Thermal data 17 Thermal resistance housing-ambient 18 Thermal resistance winding-housing
n [rpm]
Continuous operation The drive can be operated with a speed controller and, taking account of the given thermal resistance (fig. 17 and 18) at an ambient temperature of 25°C, does not exceed the maximum permissible operating temperatures. Overload range The drive reaches these operating points. Speed may vary from the set value. The overload protection shuts down the drive in the event of sustained overload.
10.6 K/W 5.32 K/W 3.66 s 13.9 s +125°C -40…+85°C +105°C 5.1 gcm2 0 mm 0.14 mm preloaded
0 7000 6000 5000 4000 3000 2000 1000
688692 688693 688712 688713
19 Thermal time constant winding 20 Thermal time constant motor 21 Ambient temperature 22 Max. winding temperature 41 Max. temperature of electronics Mechanical data (preloaded ball bearings) 16 Rotor inertia 24 Axial play at axial load 25 Radial play < 2.0 N > 2.0 N
3
0
1
2
4
5 6 7 8 9 10 11
M [mNm]
26 Max. axial load (dynamic) 27 Max. force for press fits (static) (static, shaft supported) 28 Max. radial load, 5 mm from flange Other specifications 31 Weight of motor 32 Direction of rotation
1.8 N 26 N 200 N 12 N
Gear 430_GP 22 A 433_GP 22 C Modular System
Details on catalog page 54
37 g
Clockwise (CW)
Values listed in the table are nominal. Protective functions Overload protection, blockage protection, inverse-polarity protection, thermal overload protection, low/high voltage cut-off Connection 5 wire version (Cable AWG 28) red +V CC 10…26.4 VDC black GND white Speed set value input green Monitor n (6 pulses per revolution) grey D isable (Type Enable) or sense of direction (Type Direction)
318 maxon EC motor
© 2024 maxon. All rights reserved. June edition. Subject to change.
Made with FlippingBook Publishing Software