ENX 13 GAMA Encoder ∅ 13 mm, 16 CPT Radiation-resistant
Key data
GAMA incremental
Number of channels Counts per turn Encoder length L1 Ambient temperature
2 16 7.0…9.0 –20…+105 <5
mm °C
Weight
g
Selection criteria
GAMA incremental
Speed and rotation direction detection Speed and position control Compact and robust design
High resolution Cost effective
suitable
suitable to a limited extent
not suitable
Specifications Supply voltage V CC Typical current draw Max. operating frequency
GAMA incremental
GAMA Radiation resistance
V
5 ±0.5 9.5 24 60 000
The GAMA encoder type is resistant to ionizing radiation Tested with a Co60 radiation source (gamma radiation) at up to 18 krad/h and a maximum radiation dose (TID) of 500 krad.
mA kHz rpm
Max. speed Connector
10-pin 2.54 mm multipoint connector (IEC/EN 60603-13 / DIN41651) Pin 1 Motor + Pin 2 V CC
Pin 3 channel A Pin 4 channel B Pin 5 GND Pin 6 Motor –
Pin 7 not connected Pin 8 not connected Pin 9 not connected Pin 10 not connected Output signal: TTL compatible, push-pull Output current per channel: ±10 mA
Configurations Connector Cable length
50, 100, 150, 200, 300, 500 GAMA incremental 6-pin, 10-pin
mm
DC-max 16 S DC-max 22 S DC-max 26 S Modular system DC Motors
Page Dimensions standard version
M 1:1 Notes
1 The length shown here refers only to the encoder. The additional length when mounted on a motor, or the effective length of a motor/encoder combination, can be found on the respective dimensional drawing. Maximum permissible cable/plug continuous current: 1.2 A.
295–296 297–298 299–300
Further technical details can be found in the product information in the online shop under Downloads.
maxon 415
© 2026 maxon. All rights reserved. April edition. Subject to change.
Made with FlippingBook Publishing Software