Spur Gearhead GS 38 A ∅ 38 mm, 0.1–0.6 Nm
Technical Data Spur Gearhead Output shaft Bearing at output
straight teeth stainless steel sleeve bearing max. 0.1 mm 0.03–0.2 mm
Radial play, 12 mm from flange Max. axial load (dynamic) Max. force for press fits Max. continuous input speed Recommended temperature range Axial play Number of stages 1 2
30 N 500 N
5000 rpm -5…+80°C
3
4
5
Max. radial load, 12 mm from flange 50 N 50 N 50 N 50 N 50 N
M 1:2
Stock program Standard program Special program (on request)
Part Numbers
110451 110452 110453 110454 110455 110456 110457 110458 110459 6 : 1 10 : 1 18 : 1 30 : 1 60 : 1 100 : 1 200 : 1 500 : 1 900 : 1 6 10 18 30 60 100 200 500 900 3 3 3 3 3 3 3 3 3 2 2 3 3 4 4 5 6 6 0.1 0.1 0.2 0.2 0.3 0.3 0.6 0.6 0.6 0.3 0.3 0.6 0.6 0.9 0.9 1.8 1.8 1.8 = = ≠ ≠ = = ≠ = = 81 81 73 73 66 66 59 53 53 55 55 60 60 65 65 70 75 75 1.0 1.0 1.5 1.5 2.0 2.0 2.5 3.0 3.0 0.7 0.6 0.4 0.4 0.3 0.3 0.2 0.2 0.2 20.6 20.6 23.1 23.1 25.6 25.6 28.1 30.6 30.6
Gearhead Data 1 Reduction 2 Absolute reduction 3 Max. motor shaft diameter 4 Number of stages 5 Max. continuous torque
mm Nm Nm
6 Max. intermittent torque at gear output 12 Direction of rotation, drive to output 7 Max. efficiency
% g
8 Weight
9 Average backlash no load 10 Mass inertia 11 Gearhead length L1* *for EC 32 flat L1 is + 2.0 mm
°
gcm 2 mm
overall length
overall length
Modular System + Motor
+ Sensor/Brake Page
65.4 65.4 67.9 67.9 70.4 70.4 72.9 75.4 75.4 72.5 72.5 75.0 75.0 77.5 77.5 80.0 82.5 82.5 83.6 83.6 86.1 86.1 88.6 88.6 91.1 93.6 93.6 Overall length [mm] = Motor length + gearhead length + (sensor/brake) + assembly parts
Page
A-max 26 A-max 26 A-max 26 A-max 32 A-max 32 A-max 32
181-184
182-184 13 GAMA 182-184 HED_ 5540
502
536/538 83.8 83.8 86.3 86.3 88.8 88.8 91.3 93.8 93.8 82.2 82.2 84.7 84.7 87.2 87.2 89.7 92.2 92.2 536/538 103.0 103.0 105.5 105.5 108.0 108.0 110.5 113.0 113.0
185 186
186 HED_ 5540
maxon gear 451
© 2024 maxon. All rights reserved. June edition. Subject to change.
Made with FlippingBook Publishing Software