ECX SPEED 16 connecting cable The connecting cable fits ECX SPEED 16 that are configured with a pin and external thread. Details about the motor can be found on pages 155–160 and online at www.maxongroup.com. Characteristics: • Steel housing • Withstands 1000 sterilization cycles in the autoclave • Silicone outer shell • PTFE cable insulation • Electrical conductors with cable end sleeves • In variant A , the motor cables are shielded. The shielding is fitted with heat shrink tubing and cable end sleeve. ECX SPEED 16 connecting cable Part number Cable version 584532 ECX 16 connecting cable, type A: for motors with Hall sensors or for versions with encoders 592194 ECX 16 connecting cable, type B: for motors without Hall sensors and without encoders 595697 ECX 16 connector set (without cable)
A
B
Cable and pin assignment, type B Color Pin
Cable and pin assignment, type A Color Pin
Assignment Winding 1 Winding 2 Winding 3
Assignment Winding 1 Winding 2 Winding 3
1 2 3 9
AWG 22
red black white pink purple
1 2 3 4 5 6 7 8
AWG 22
red black white orange blue yellow brown grey pink purple green
- -
AWG 26
V CC GND H1/- H2/- H3/-
AWG 26
10
9 10
NTC/Data NTC/CLK
no pin
-
484 maxon
© 2026 maxon. All rights reserved. April edition. Subject to change.
Made with FlippingBook Publishing Software