ECX SPEED 19 connecting cable The connecting cable fits ECX SPEED 19 that are configured with a pin and external thread. Details about the motor can be found on pages 161–166 and online at www.maxongroup.com. Characteristics: • Steel housing • Withstands 1000 sterilization cycles in the autoclave • Silicone outer shell • PTFE cable insulation • Electrical conductors with cable end sleeves • In variant A , the motor cables are shielded. The shielding is fitted with heat shrink tubing and cable end sleeve. ECX SPEED 19 connecting cable Part number Cable version 589852 ECX 19 connecting cable, type A: for motors with Hall sensors or for versions with encoders 589892 ECX 19 connecting cable, type B: for motors without Hall sensors and without encoders 551012 ECX 19 connector set (without cable)
A
B
Cable and pin assignment, type B Color Pin
Cable and pin assignment, type A Color Pin
Assignment Winding 1 Winding 2 Winding 3
Assignment Winding 1 Winding 2 Winding 3
1 2 3 9
AWG 20
red black white pink purple
1 2 3 4 5 6 7 8
AWG 20
red black white orange blue yellow brown grey pink purple green
- -
AWG 26
V CC GND H1/- H2/- H3/-
AWG 26
10
9 10
NTC/Data NTC/CLK
no pin
-
maxon 485
© 2026 maxon. All rights reserved. April edition. Subject to change.
Made with FlippingBook Publishing Software