ENX 22 EASY INT Encoder ∅ 22 mm, 1024 CPT / 4096 steps, Single Turn Integrated into motor
Key data
EASY incremental and absolute
Number of channels Counts per turn Steps per turn Resolution (bit single turn) Encoder length L Ambient temperature
3 1024 4096 12 -40 … 125
mm 0 (integrated into motor)
°C
Selection criteria
EASY incremental and absolute
Speed and rotation direction detection Speed and position control Compact and robust design
High resolution Cost effective
suitable
suitable to a limited extent
not suitable
Specifications Supply voltage Vcc Typical current draw Max. operating frequency
EASY incremental and absolute
V
5 ± 0.5 22 4000 200 000
mA kHz rpm
Max. Speed
Connector1 M12, male, A-coded
Pin 1 GND (ground) Pin 2 Motor NTC Pin 3 +V CC Pin 4 channel A Pin 5 channel I Pin 6 channel A Pin 7 channel B Pin 8 channel I Pin 9 Motor NTC Pin 10 channel B Pin 11 Data_out- Pin 12 Data_out Pin 13 CLK_in Pin 14 CLK_in-
Pin 15 Hall 3 Pin 16 Hall 1 Pin 17 Hall 2
Output signal: EIA-Standard RS 422 Output current per channel: ± 20 mA
Configuration Signalprotokoll
EASY incremental and absolute
BiSS-C, SSI
modular system
Notes ¹Connecting cables available in Online Configurator.
Page
EC motor IDX 56 IDX 70
245–247 248–250
Further technical details can be found in the product information in the online shop under Downloads.
maxon sensor 515
© 2024 maxon. All rights reserved. April edition. Subject to change.
Made with FlippingBook Publishing Software