Installation clamping module
Pneumatic opening. Pneumatic blow-out. Opening operating pressure: KP10.3 min. 5 bar - max. 12 bar. KP20.3 min. 4.5 bar - max. 12 bar. Cover and piston hardened. Repeat accuracy < 0.005 mm. Installation clamping module
Size Pull-in/locking force up to [kN]
Holding force [kN]
Blow out Weight [Kg]
Model
10.0 17.0
25 55
● ●
1.4 2.6
570258 KP10.3 570259 KP20.3
Application: Zero-point clamping system for set-up-time-optimised clamping during cutting and non-cutting machining. Note:
The installation clamping module has high holding, pull-in and locking forces. This is opened pneumatically (1) and mechanically locked through spring force. Subsequent uncoupling of the pressure lines is possible at all times (module is tensioned pressure- free). The clamping module with blow-out and support control has two connections: 1x pneum. opening (1), 1x pneum. blow-out and support control (3). (The pneumatic blow-out and support control can optionally be connected.) Dimensions: Model Size dia.D [mm] dia.DN [mm] dia.D1 [mm] H [mm] HA [mm] dia.LK [mm] M T [mm] 570258 KP10.3 112 22 78.0 35 10 88 M6 25 570259 KP20.3 138 32 102.0 49 15 115 M6 34
KP20.3
KP10.3
ZERO-POINT-SYSTEMS 9
Phone: 800-992-0236 ∙ Web: www.vektek.com
Made with FlippingBook - Online Brochure Maker