Mountz articulated torque arms absorb the torque reaction emitted from power tools, enhancing operator comfort and reducing fatigue. The torque arms provide exceptional agility, making them perfect for complex and dynamic tasks. These arms enhance ergonomic support by allowing operators to maneuver tools precisely and efficiently, significantly reducing physical strain and preventing repetitive motion injuries. With the ability to bend like an elbow, articulated torque arms can be used in various positions, making them suitable for various applications. Whether working in tight spaces or needing to adjust the angle frequently, these arms provide the required flexibility.
ROTATATING TOOL CLAMP FOR USE WITH LTS & ATS TORQUE ARMS QUICK REFERENCE GUIDE (ITEM # 509343)
The rotating tool clamp provides an operator flexibility to adjust and move the power tool into various positions for the fastening process. For Use with LTS linear torque arms and ATS articulated torque arms
Adjust the positioning
What’s in the Box : The Mountz torque arm is packaged with four components that need to be assembled. Bag A Bag B
ROTATING TOOL CLAMP
ADAPTER FASTENER
ADAPTER INSERT
LOCKING PIN
Rotating Tool Clamp Installation onto Torque Arm 1. Press the adapter insert from Bag A into the adapter Bag B. Ensure you press the insert from the side of the adapter locking pin.
ADAPTER
2. Choose how much vertical play you would like. Choose between a fixed position or a 90° range.
FIXED
90°
INSERT
3. Attach the adapter assembly to the rotating tool holder by using the fastener that was included. 2. Ensure the square end of the adapter insert is inserted into the flat, square of the rotating tool holder.
Engineered in the Silicon Valley Since 1965
Copyright © 2025 Mountz Inc. All Rights Reserved. V1/060125
ROTATATING TOOL CLAMP FOR USE WITH LTS & ATS TORQUE ARMS QUICK REFERENCE GUIDE (ITEM # 509343)
4. Adjust the horizontal play by adjusting the fastener on the rotating tool holder. You can choose a fixed position or 90°.
5. To attach the rotating tool holder assembly onto the torque arm, start by removing the current tool holder from the torque arm.
LOOSEN THIS FASTENER TO REMOVE CURRENT HOLDER.
6. Attach the rotating tool clamp assembly onto the torque arm by tightening the tool holder fastener.
LOOSEN THIS FASTENER TO REMOVE CURRENT HOLDER.
Scan for Manual
Scan for Warranty & Returns Policy
Mountz Support North America: + 1.408.850.9978 International: + 44.1428.741756 mountztorque.com
Engineered in the Silicon Valley Since 1965
Copyright © 2025 Mountz Inc. Todos los derechos reservados V1/060125
Page 1 Page 2Made with FlippingBook Annual report maker