Rotating Tool Clamp Installation onto Torque Arm Step 1
Adapter
Locking Pin
Press the adapter insert from Bag A into the adapter Bag B. Ensure you press the insert from the side of the adapter locking pin.
Step 2
Choose how much vertical play you would like. Choose between a fixed position or a 90° range.
90 °
Fixed
Step 3
Insert
Attach the adapter assembly to the rotating tool holder by using the fastener that was included.
Ensure the square end of the adapter insert is inserted into the flat, square of the rotating tool holder.
Step 4
Adjust the horizontal play by adjusting the fastener on the rotating tool holder. You can choose a fixed position or 90°.
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
2
Made with FlippingBook Annual report maker