Step 5
To attach the rotating tool holder assembly onto the torque arm, start by removing the current tool holder from the torque arm.
Loosen this fastener to remove current holder.
Step 6
Attach the rotating tool clamp assembly onto the torque arm by tightening the tool holder fastener.
Tool holder fastener
For Right Angle Tools
1. You can adjust the tool holder to support a right angle tool
2. To use this tool holder with a right angle tool, we recommend using on an LTS (linear) arm
3. Install the holder per the images
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
3
Made with FlippingBook Annual report maker